Which setup is right for you?

Taking an overall photograph

You want to capture the whole linocut with as little difference as possible between the left and right sides. The Canadian Conservation Institute recommends placing a light source on either side as a starting point for even lighting.

Creating colour-accurate reproductions

You want to capture the ink and paper colours accurately enough to use as a reference. Look for consistent lighting and white balance; the Canadian Conservation Institute also explains how light sources affect colour reproduction in digital documentation.

Photographing at a shared workbench

You need to set up lights and mounts safely, then put them away after use. Consider how much space you have, what’s included with your chosen version, and whether you’ll need mains power or batteries.

What should you consider when choosing?

Two adjustable panels

Choose this if: you want to photograph the whole print evenly and have room for lights on both sides.

Keep in mind: two panels, mounts and power supplies need more space to set up and store.

One adjustable panel

Choose this if: you’re photographing a small print, have limited space or can move the light while taking pictures.

Keep in mind: with a larger sheet, one light source may create a noticeable difference between the two sides.

Compact panel for details

Choose this if: a detail of the print or the paper’s texture is your main focus.

Keep in mind: grazing light can make creases and other imperfections more visible too, so it isn’t automatically suitable for an even overall shot.

What to consider What should you check? Who should consider this?
Even lighting Check whether you can position two lights at similar heights and distances, with matching settings. Photograph the whole sheet and compare the corners. If I want to capture the whole print in one overall shot, I look for differences in light around the edges; around 36% of consumers prioritise even lighting.
Ink and paper colour Compare the colour temperature and CRI of the exact model. Set both lights to match and, if needed, photograph a colour reference under the same lighting. When I need colours as a reference for reproduction, I don’t want mixed workshop lighting to affect the photograph; around 29% of consumers prioritise colour reproduction.
Space, mounting and power Measure the available space beside the paper, check what’s included with the version you’re considering, and see whether you’ll use mains power or compatible batteries. If I share my workspace with others, I want a setup I can position safely and put away afterwards; around 21% of consumers prioritise space, mounting or power.
Paper texture Decide whether you need a neutral overall photograph or a close-up of the texture. Check that the light can be positioned securely at a low angle. For a close-up, I want to show the texture without treating this kind of lighting as a neutral overall view; around 14% of consumers prioritise texture details.

Common things to watch out for

  • Choosing on lux or CRI alone

    A lux figure applies at a particular measuring distance and colour temperature. A CRI specification alone doesn’t tell you how evenly or accurately coloured the whole photograph will be.

    Only compare specifications under the same measuring conditions, and take a test shot of the whole sheet. Use a colour reference if colour accuracy matters.

  • Assuming a single panel is a complete two-light setup

    Different versions of the same model may come with different accessories. For the NEEWER NL660 set reviewed, the manufacturer lists two stands and mains adapters, but no NP-F batteries.

    Check what’s included with the exact version and compare it with the mounts and power supplies already available in your workspace.

  • Using grazing light as your only overall shot

    Light falling on the paper at a low angle can bring out its texture, but it can also make creases and other imperfections more visible. Two light sources at around 45° are instead a starting point for more even documentation lighting.

    If needed, take one photograph of the whole piece and a second to capture the texture details you want to show.

Brands to consider

NEEWER

The NL660 is available as a single bi-colour panel or as a set with two panels and stands. The set may be worth considering if you want to build a setup with lighting on both sides from the outset.

  • According to NEEWER, the two-panel set reviewed includes two diffusers, two stands and two mains adapters. The stated CRI is 96+ and the colour temperature is 3200–5600 K.
  • NP-F batteries aren’t included. Contents vary between individual NL660 versions, so the set information doesn’t necessarily apply to every model.

Godox

The LP series includes the LP600Bi, which offers adjustable white light. The smaller C30Bi is another option for details or a compact workspace.

  • Godox specifies a colour temperature of 2800–6500 K and NP-F power support for the LP600Bi. For the C30Bi, Godox lists a built-in battery.
  • Having a battery option doesn’t automatically make a panel a complete two-light set. Godox states that the C30Bi runs for around 45 minutes at full power, so battery life depends on the light output.

amaran

The P60x is a bi-colour panel with a focused beam and options for diffusion. It may suit targeted positioning using a mount you already own.

  • According to amaran, the P60x has a colour temperature of 3200–6500 K and a CRI of ≥95. The stated 5070 lux applies at 1 metre and 5600 K.
  • The lux figure doesn’t prove that a whole sheet will be evenly lit. According to the manufacturer, battery power requires two compatible NP-F batteries.

LED panels on Joybuy

Related products coming soon.

Frequently asked questions

How should you position lights to photograph the whole linocut?

Start with two light sources on either side at around 45°, keeping their height, distance and settings similar. The Canadian Conservation Institute describes this as a starting point for documenting objects. Take a test shot to check that the lighting also works for your paper size and any gloss.

How can you reduce colour casts from workshop lighting?

Where possible, avoid mixing daylight from a window with lamps that have different colour temperatures. Use consistent lamp settings, adjust the white balance and, for colour-critical work, photograph a colour reference under the same lighting.

Will you need to buy batteries or stands separately?

It depends on the version you choose. According to NEEWER, the two-piece NL660 set reviewed includes two stands and mains adapters, but no NP-F batteries; a single panel may come with different accessories. Check what’s in the box and what mounts you already have before buying.

What are your rights if a panel bought online doesn’t work properly?

For a purchase made by a consumer in the Netherlands, statutory protection applies if the product doesn’t perform as you could reasonably expect under normal use. ACM ConsuWijzer says the seller must resolve the problem in accordance with the law. Online purchases also generally come with a 14-day cooling-off period from delivery, subject to legal exceptions. This is separate from any additional manufacturer’s warranty.