Which set-up is right for you?

Seller of glossy mugs

You want to reduce distracting hotspots on rounded, glazed ceramics without losing the shape of the mug in the shot. Photography advice from Orbitvu Netherlands and Nikon USA describes diffused light as a way to soften harsh reflections.

Maker of a mug catalogue

You photograph several designs and want to keep the background, crop and colour consistent across product pages. Canon Europe discusses checking white balance in challenging lighting conditions.

Photographer with a small workspace

You need room for a mug and its handle, and want to put the lighting away after use. The dimensions and included components of your chosen set-up will help determine whether it’s practical for your space.

What should you look for when buying?

Start by considering how much control you want over reflections and how easy it should be to repeat your results. Then check whether the model will work with your workspace and equipment.

Light tent with built-in lighting

Best for: Lots of similar product shots against a fixed background, with minimal separate equipment.

Consider: The wraparound lighting gives you less freedom to move an individual light source to create a particular highlight.

Movable softbox with studio light

Best for: Anyone who wants to adjust the position of reflections and shadows for each mug, or take lifestyle shots too.

Consider: You’ll need space and time to position the light; soft light won’t automatically remove every reflection.

Unlit fabric light tent

Best for: Anyone who already has suitable external lights and wants to position them around the tent.

Consider: The tent doesn’t light the mug itself; you’ll need to use and position external lights.

Separate softbox for an existing light

Best for: Anyone who already has a suitable studio light and only needs a different light modifier.

Consider: Check the fitting; a softbox isn’t a complete kit with a light and stand.

What to consider What to look for Who is this important for?
Reflections and shape Check the diffuser, the position of the light source and the size of the shooting opening. If I photograph glossy mugs, I want to control distracting reflections without losing the rounded shape. Around 36% of consumers give reflection control top priority.
Consistent product photos Check whether the background and necessary lights are included in the set. For a series of mugs, I want to keep the background, lighting and crop consistent. Around 29% of consumers prioritise consistency across product photos.
Glaze colour Use the same lighting set-up and check the white balance in a test shot. When photographing mugs with different glaze colours, I want the photos to show those colours accurately. Around 21% of consumers put colour consistency first.
Space and kit contents Measure the mug, including its handle; check the internal dimensions, opening, lights and fitting. If my workspace is limited or I want to use existing lights, the set-up needs to suit my space and equipment. For around 14% of consumers, this practical compatibility is their top priority.

Common mistakes

  • Assuming an unlit light tent is a complete lighting kit

    A fabric tent may include backgrounds and a shooting space without including a light.

    Read the parts list for the exact model and check which lights you’ll need to add yourself.

    You’ll need external lights for an unlit tent.

  • Relying only on the tent’s external dimensions

    The mug, including its handle, and your chosen composition need to fit in the usable space.

    Measure your largest mug and check the model’s internal dimensions and shooting opening.

  • Assuming soft light makes colour correction unnecessary

    A diffuser doesn’t remove the need to check the white balance for the light source you’re using.

    Take a test series under the same lighting and check the white balance and glaze colour before photographing the whole range.

Brands to consider

PULUZ

The PU5042EU is a 40 cm foldable light tent with lighting, a diffuser and backgrounds, designed for a compact product-shot set-up.

  • PULUZ says this model has three light panels and four backgrounds.
  • Check that your largest mug, including its handle, fits in the usable shooting space; the product specifications aren’t an independent test of reflection control.

BRESSER

The BR-60S COB LED set is designed for anyone who wants to position separate studio lights with softboxes.

  • BRESSER lists two 60 W LED lights and a colour temperature of 5600 K for this model.
  • This set-up takes more time to position than a foldable light tent; the stated figures are manufacturer specifications, not the result of a comparison test.

NEEWER

The 60 × 60 × 60 cm Photo Studio Shooting Tent is a foldable fabric tent for use with external lighting.

  • The product specifications list diffused nylon, a removable front panel and four backgrounds.
  • The packaging doesn’t list a light as included, so check which external lighting you’ll need.

Godox

The SB-FW6090 is a rectangular 60 × 90 cm softbox with a Bowens mount for a compatible studio light.

  • The official model list specifies the dimensions and Bowens mount.
  • This is a light modifier, not a verified complete lighting kit; check that the mount fits your light.

Products at Joybuy

This Joybuy pick is a ring light for adjustable content lighting. It isn’t a softbox and doesn’t replace the choice between a light tent and a separate softbox.

10 inch ring light with tripod and remote control

10 inch ring light with tripod and remote control

An option for anyone who wants to adjust the lighting for content shoots; this product is a ring light, not a softbox.

The product name lists three light colours and ten brightness levels.

Includes a 63 inch tripod and a remote control, according to the product name.

Joybuy

Frequently asked questions

How should you start lighting a glossy mug?

Start with diffused light and take a test shot. If a reflection creates a distraction on the glaze, move the mug or the light source. Also check that the handle and outline remain visible.

Does a softbox or light tent always come with a light?

No, it depends on the model and set. According to the manufacturer, the PULUZ PU5042EU has built-in light panels, and the BRESSER BR-60S set includes lights. The packaging for the NEEWER fabric tent mentioned here doesn’t list a light. The Godox SB-FW6090 is a separate Bowens light modifier. Always check the parts list for the exact model.

How can you keep the colours of different mugs consistent?

Use the same lighting and background for the whole series, and check your camera’s white balance. Assess the test shot itself rather than relying only on a stated light specification.

What should you check when buying a separate softbox for an existing light?

Check that the softbox fitting is compatible with your studio light. A separate softbox is a light modifier and doesn’t automatically include a light or stand.

Does the statutory cooling-off period for online purchases apply to your business?

Don’t assume it does if you’re buying on behalf of your business. The Netherlands Authority for Consumers and Markets describes the cooling-off period for consumers making online purchases; check which sales and returns terms apply to your purchase.