A light box with built-in lighting is a good choice for small figures if you want a compact set-up with a clean, consistent background. Just check that your largest figure, including its base, will leave enough room for the camera angle you want. Choose a separate softbox with a light source if you want more precise control over the direction of the light and want to preserve visible relief. Bear in mind that you may need to buy some components separately. With either option, set the white balance to match the lighting you’re using to capture the paint colours as accurately as possible.
Who is this choice relevant to?
Online shop owner who cares about colour
You want subtle differences between paint shades to remain recognisable. So compare the specifications for the exact lamp model and set the white balance to suit the lighting in your set-up. A daylight rating alone won’t tell you how colours will look in the photo.
Photographer who wants to control relief and shine
You want to minimise reflections on painted or varnished areas without losing all the shadows that show the figure’s relief. A diffuser and the ability to reposition the light are therefore important factors to consider.
Maker with limited workspace
You photograph figures on a table and may need to put your set-up away afterwards. Check that your largest figure, including its base and any protruding parts, will fit, and find out exactly which components are included in the set.
What should you look for when choosing?
Light box or light tent
Best for: small figures and a compact set-up with a fixed background.
Trade-off: an enclosed set-up is easy to reproduce, but gives you less freedom to light one side more prominently.
Separate softbox with a light source
Best for: anyone who wants to adjust the direction of the light to keep relief and brush texture visible.
Trade-off: you have more freedom to position the light, but you’ll need to factor in the components required and the space needed to set everything up.
When photographing painted figures, colour reproduction, control over the direction of the light, fit and having a complete set-up all matter in different ways.
| What to consider |
What to look for when buying |
Who is this important to? |
| Colour of the paintwork |
Compare the colour rendering specifications for the exact lamp and check whether you can adjust the white balance. |
When I take photos for my online shop, I want paint shades to remain recognisable under my usual lighting; around 31% of consumers give colour rendering the highest priority. |
| Soft light that preserves visible relief |
Check whether a diffuser is included and whether you can position the light to the side or at an angle from above. |
When highlights obscure details, I want to soften the light without losing the figure’s shape; around 31% of consumers prioritise lighting and relief. |
| Room for the figure and camera |
Measure the figure, including its base and any protruding parts, and compare the dimensions with the internal space and openings. |
With limited table space, I want to frame my largest figure without it touching the background or edge; around 23% of consumers give fit and workspace the highest priority. |
| Complete set-up |
Read the packing list and check which lamp, power supply, stand and backgrounds are included. |
If I want to start taking photos straight away, I want to know in advance which components I still need; around 15% of consumers prioritise a complete, ready-to-use set. |
For consistent colours, it helps to use the same lighting set-up throughout a photo session and adjust the white balance to match. Canon Europe explains how a custom white balance can correct colours under the lighting you’re using. Adobe recommends a controlled environment with good lighting and a clean background for product photography.
Common mistakes
-
Assuming a light tent is a complete, illuminated set
The listed contents of the NEEWER tent include the tent, a carry bag, a front panel and backgrounds; the manufacturer does not list a lamp.
Compare the packing list with everything you need to take a photo.
You’ll need to arrange a light source separately for this tent. Depending on your set-up, you may also need a stand.
-
Confusing the external dimensions with the available internal space
If a figure only just fits in the box, there will be little room left for the background and the camera angle you want.
Measure the figure, including its base and any protruding parts, and compare the dimensions with the internal space and openings of the exact model.
If there isn’t enough room, you may need a larger box or a different set-up.
-
Assuming a high CRI or daylight rating guarantees accurate paint colours
A stated CRI value describes one characteristic of a lamp, but on its own it doesn’t determine how the complete set-up captures colours. The white balance also affects the colours in the photo.
Check the specifications for the exact model and take a test shot under your usual lighting with a suitable white balance.
-
Automatically assuming consumer rules apply to a business order
ACM ConsuWijzer states that consumer protection does not apply when a contract is used mainly or exclusively for business purposes.
Before placing a business order, read the returns, warranty and service terms that apply to your purchase.
Brands to compare
DUCLUS
Light boxes in various sizes, including a compact model for small figures.
- DUCLUS says its 16 × 16 inch model has 160 dimmable LEDs, CRI 97+ and eight backgrounds.
- These are manufacturer specifications, not independent measurements. Check the exact model and make sure there’s enough room for your largest figure.
NEEWER
A 60 × 60 × 60 cm photo tent for anyone who wants to choose their own light source.
- The manufacturer lists a removable front panel and four backgrounds.
- The stated packing list does not include a lamp, so don’t treat the tent as a complete, illuminated light box.
PULUZ
Small, integrated light boxes, including the PU5021 for very small objects.
- According to the manufacturer, the PU5021 has built-in LED lighting and six backgrounds.
- The manufacturer specifies a 5 V/2 A USB power supply for this model and warns against an output above 5 V. Its compact size limits the room available for the figure and framing; you’ll need to arrange a suitable charger yourself.
Godox
Separate continuous lighting and matching softboxes for a set-up with repositionable light.
- Godox lists a Bowens mount and a 0–100% dimming range for the SL60IID. The brand also offers Bowens softboxes such as the SB-FW6060.
- These are separate components. Check whether the light source, softbox and stand are being sold together.
Hama
Foldable light boxes with integrated lighting, including the 50 × 50 × 50 cm ToGo 00004664.
- Hama lists a diffuser, backgrounds, ten brightness settings and three colour temperature settings for this model.
- Check that the model on offer and the USB power supply you need are suitable for your set-up.
Joybuy products
Related products coming soon.
Frequently asked questions
How can you stop paint shades looking too warm or too cool in photos?
Use the same lighting set-up throughout a photo session and adjust the white balance to match the light falling on the figure. Canon Europe explains that lighting affects the colours captured; a stated Kelvin value is no substitute for adjusting your camera’s white balance.
Can you use a 5 V USB light box with any fast charger?
No. First check the requirements of the exact model and the power supply’s output. PULUZ specifies 5 V/2 A for the PU5021 and warns that a USB output above 5 V is not supported.
Does electric photography lighting sold in the Netherlands need a CE mark?
That depends on whether the product falls under the relevant CE legislation. The NVWA gives nominal voltage ranges of 50–1000 V AC and 75–1500 V DC for the Low Voltage Directive. Don’t automatically treat a USB box and its mains adapter as the same electrical product. According to the Netherlands Enterprise Agency, CE is a manufacturer’s declaration of conformity, not an independent safety mark.
Do consumer rules always apply when you buy something for your online shop?
Not always. ACM ConsuWijzer states that consumer protection does not apply when a contract is used mainly or exclusively for business purposes. Before placing a business order, check the applicable returns and warranty terms rather than automatically assuming the consumer rules for online purchases apply.
How can you keep backgrounds and a series of online shop photos consistent?
Use a clean background and keep the figure’s position, the direction of the light and the white balance the same throughout a product photo series. Adobe describes a controlled environment with good lighting and a clean background as the basis for product photos. Before you start, check the background sheet for creases and dirt.