Who is a flight throttle for?

Single-engine propeller aircraft pilots

You want to control your simulated aircraft’s engine functions separately without building a full cockpit. Logitech G, VKB and Virtual Fly describe models with separate levers or axes.

Simulator pilots with limited desk space

You share your desk with other equipment, so you need to account for the unit, lever movement and mounting. The listed dimensions and mounting options for models from Logitech G, VKB and Honeycomb Aeronautical can help you work out whether they’ll fit.

Pilots who switch between aircraft types

You want to adapt the controls for different simulations, but only if the extra features and overall size suit your set-up. Logitech G, Honeycomb Aeronautical and Thrustmaster describe a range of lever layouts and control options.

What should you look for?

First, decide which axes you want to use. Then measure your entire set-up and check the connection and included components.

What to consider What to look for Who is this important for?
Separate engine controls Check how many axes your aircraft uses and which functions you want to assign. Logitech G mentions interchangeable lever knobs; according to VKB FSC Europe, the GNX THQ has three analogue axes. If I want to control the throttle, propeller and mixture separately, I’m looking for a suitable layout without paying for axes I won’t use. Around 29% of consumers give separate engine controls top priority.
Space and mounting Measure the available surface and allow for lever travel, your hand, the clamp and cables. VKB FSC Europe lists the GNX THQ as 26 × 15 × 12 cm. Honeycomb lists the Bravo as 273 × 382 × 198 mm, excluding the mounting plate and metal clamp. If my desk also needs to accommodate other equipment, I want to know whether the throttle will fit and remain within reach during use. Around 29% of consumers focus primarily on available space and mounting.
Connection and settings Check the connection for your computer or console and how to configure the axes in your simulator. Connecting the VKB GNX THQ directly to a PC via USB requires a separate GNX USB Controller. If I want to keep using my existing simulator set-up, I’ll check the connection and required settings first. Around 24% of consumers give compatibility and settings top priority.
What’s in the box Compare the included mounting hardware and check whether you need an additional controller or expansion for the connection you want. If I want to use the throttle straight away with my intended set-up, I want to know in advance which other components I’ll need. Around 18% of consumers focus primarily on the total purchase and included components.

Common pitfalls

  • Measuring the unit on its own

    A throttle may fit on your desk, but the clamp, lever travel or space for your hand could still get in the way. Honeycomb lists the Bravo’s dimensions excluding the mounting plate and metal clamp.

    Measure the complete set-up before choosing a spot on a small desk.

  • Assuming the VKB GNX THQ is a complete USB set

    The GNX THQ is supplied without a GNX USB Controller. This controller is needed to connect directly to a PC via USB; connecting through compatible Gladiator equipment is another option.

    Before buying, decide which connection you’ll use and whether you need the separate controller.

  • Assuming two airliner levers are the same as three GA levers

    The Thrustmaster TCA Quadrant Airbus Edition has two throttle levers. Disabling the detents doesn’t automatically give you three separate physical controls for throttle, propeller and mixture.

    Choose this lever layout if it suits your Airbus simulation, and check how many axes your light aircraft requires.

Brands to compare

Logitech G

The Flight Throttle Quadrant is a standalone module with three levers for assigning functions in a light aircraft.

  • Logitech G says the lever knobs are interchangeable and adjustable mounting hardware is included.
  • Check that the module will fit alongside your existing stick or yoke: the throttle doesn’t replace the flight controls.

VKB

The GNX THQ is a tabletop module with three axes, designed for a set-up you need to fit precisely into your space.

  • VKB FSC Europe lists its dimensions as 26 × 15 × 12 cm.
  • A GNX USB Controller is needed to connect directly to a PC via USB; connecting through compatible Gladiator equipment is another option.

Honeycomb Aeronautical

The Bravo combines interchangeable levers for GA and commercial aircraft with additional cockpit controls.

  • Honeycomb lists controls for functions including autopilot and warnings.
  • The listed dimensions are 273 × 382 × 198 mm, excluding the mounting plate and metal clamp. So be sure to measure the set-up with everything mounted.

Virtual Fly

The TQ3+ is designed for separate throttle, propeller and mixture controls, including for simulated single-engine aircraft.

  • Virtual Fly lists adjustable lever resistance and a desk clamp for desks up to 50 mm thick.
  • Check that the clamp and full lever movement will fit your desk.

Thrustmaster

The TCA Quadrant Airbus Edition is an alternative if Airbus simulation matters to you as well as flying light aircraft.

  • According to Thrustmaster, the mechanical detents can be disabled to provide linear axes.
  • The model has two throttle levers, so it doesn’t provide three separate physical levers for throttle, propeller and mixture at the same time. Expansions are sold separately.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need three levers for every light aircraft?

No. It depends on the functions of the specific simulated aircraft and what you want to control physically. A quadrant with three assignable axes gives you the option to control the throttle, propeller and mixture, for example, but you don’t need a third axis if you won’t use that function.

Can I connect the VKB GNX THQ as a standalone USB throttle?

Yes. To connect it directly to a PC, you’ll need the separate GNX USB Controller. VKB FSC Europe says this isn’t included with the THQ; connecting through compatible Gladiator equipment is another configuration.

What should I consider when positioning a throttle?

Measure the space needed for the clamp and the full lever travel before mounting the throttle. Virtual Fly says the TQ3+ comes with a desk clamp; check that your desk’s thickness and shape are suitable for this mounting option.

What are my rights when buying online in the Netherlands?

According to ACM ConsuWijzer, when you buy a product online you will generally have a statutory 14-day cooling-off period from delivery, subject to applicable exceptions. If a product is faulty, the seller is responsible for the statutory guarantee; in the Netherlands, this doesn’t simply mean that every product is covered for exactly two years.