Who is this choice relevant to?

Online shop seller with prints behind glass

Wants to reduce distracting reflections in the glass and frame without making the print unrecognisable. The Canadian Conservation Institute explains how the position of light sources affects the lighting of an object, so make sure you can move your lights and camera.

Seller who wants to show colours consistently

Photographs several prints for the same online shop and wants to control white balance, lighting settings and how print colours are assessed. Canon Europe points out that ambient light affects colour assessment.

Photographer of large framed prints

Wants to check that both the centre and the corners are lit well enough, and therefore compares a setup with one panel against one with two light sources. The Canadian Conservation Institute describes using light sources on either side as an approach to even lighting.

What to look for in LED panels

Two panels on either side

Suitable when: you want to light a flat or large print evenly and have room on both sides. The Canadian Conservation Institute describes two light sources on either side, at around 45°, as a starting point.

Keep in mind: this setup needs more space and may cause reflections in the glass or frame; Broncolor shows that reflections can remain visible.

One adjustable panel

Suitable when: you’re working with a smaller print, have limited space or want to move the light to assess glare and texture.

Keep in mind: with larger prints, check that both the centre and the corners are lit evenly enough.

What to consider What to look for Who it matters more to
Reflections in the glass and frame Check whether you can move the lights and camera, and take a test shot through the glass. When I photograph prints behind glass, I want to be able to move the light until the reflection is out of shot. Around 33% of consumers give avoiding reflections their highest priority.
Consistent colour reproduction Compare the adjustable white light on the exact model; keep the white balance fixed and assess prints under the same lighting conditions. Canon Europe stresses that ambient light affects colour assessment. When taking a series of online shop photos, I want to repeat the settings and colour assessment as consistently as possible. Around 27% of consumers put consistent colour reproduction first.
Even lighting Consider the print size and the space available; check the centre and all the corners in a test shot. With a large print, I want the corners to be lit well enough, not just the centre. Around 27% of consumers give even lighting across the whole print their highest priority.
Power supply and kit contents For the exact model, check whether an adapter, batteries, stands, mounts and a diffuser are included and suitable for your setup. When I photograph in different locations, I want to know which power supplies and parts I need to take with me. Around 13% of consumers prioritise working on location and having a complete setup.

Common buying pitfalls

  • Assuming a high lux rating means a reflection-free photo

    A stated light output doesn’t tell you whether the lamp will be reflected in the glass or frame. The position of the light and the reflective surface both affect what the camera sees.

    Before choosing based on a light output figure, test the setup with your own print and frame from the camera’s final position.

  • Assuming two lights at 45° are always the right setup

    Two light sources can illuminate a flat print evenly, but they can also make reflections in the frame visible or flatten texture you want to retain.

    Use the angle as a starting point, then assess reflections, corners and texture separately in test shots.

  • Comparing a single panel with a complete two-light kit

    The included parts vary by model and version. Manufacturer NEEWER lists stands and diffusers with the NL660 two-panel kit, but NP-F batteries are not included.

    Before buying, check the packing list for the exact version, including the power supply, mounting accessories and diffusion.

Brands to consider

Godox

The Litemons LP series includes the LP600Bi white-light panel, as well as versions sold in multi-panel kits. The range may be worth considering if you’re thinking about a setup with two light sources.

  • Godox says the LP600Bi has adjustable white light from 2800–6500 K and can run on mains power or NP-F batteries.
  • Godox lists diffusion and an adjustable mount; check which parts are included with each kit.
  • These specifications don’t prove that reflections in your glass or frame will disappear.

NEEWER

The NL660 Bi-Color is available as a single panel and as a two-panel kit with stands; the kit may suit a symmetrical starting setup.

  • According to NEEWER, the two-panel kit has adjustable light from 3200–5600 K, dimming, two diffusers and two stands.
  • NEEWER doesn’t list NP-F batteries as included with the kit.
  • The stated specifications aren’t an independent measurement of colour accuracy or light distribution on framed prints.

amaran

The P60x is a standalone, adjustable bi-colour panel for anyone starting with one light or creating a setup that can be moved around.

  • According to amaran, the P60x has a colour temperature range of 3200–6500 K and can run on mains power or two NP-F batteries.
  • amaran lists 5.070 lux at 1 metre at 5.600 K, measured under the manufacturer’s own test conditions.
  • One panel won’t automatically provide even lighting across a large print. Also check whether batteries are included with the specific version.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need to position two lights at exactly 45°?

No, 45° is a starting point, not a fixed rule for every print. The Canadian Conservation Institute describes using two light sources on either side at around this angle for even lighting, but glass or a frame may show visible reflections. Adjust the position and assess the image from the camera’s viewpoint.

Will a polarising filter always eliminate reflections from a framed print?

No, the result depends on the setup and needs to be tested with your own print. Broncolor describes a demonstration using polarisation on both the light source and camera, showing that their relative settings also affected colour reproduction. This isn’t a guaranteed feature of an LED panel.

Which parts should I check before my first photo shoot?

For the exact version, check the adapter, any batteries, stands, mounts and diffuser. NEEWER lists stands and diffusers with the NL660 two-panel kit, but NP-F batteries are not included.

What does CE mean for an electric LED panel in the Netherlands?

For equipment covered by the relevant product rules, the manufacturer must apply the CE marking after meeting the applicable technical and administrative requirements. Business.gov.nl stresses that CE isn’t a quality mark; if in doubt, check the documentation for the exact version.

Do I have the same cancellation period and warranty rules for a business purchase as a private buyer?

Not automatically. According to Business.gov.nl, a purchase by a business generally isn’t covered by consumer law, there’s no statutory consumer cancellation period, and different warranty rules apply. Before placing a business order, check the terms that apply to your purchase.