What should you look for when choosing?
Start with the size of your drawing and how evenly you want it lit. Then decide whether you need a second panel, a complete set or battery power. Getty and Pixpa’s guidance focuses on documentary and art photography, so check for reflections and shadows on your own paper too.
| What to consider |
What to look for |
Who is it important for? |
| Even lighting |
Check whether you can position two panels at similar distances and angles. Also see whether diffusers and suitable stands are included. |
When I photograph a larger sheet, I want the whole surface lit evenly, without distracting reflections. Around 36% of consumers put even lighting first. |
| Consistent tones |
Check whether you can set both lamps to the same colour temperature. A stated CRI is a model specification, not a measurement of the finished photo. |
When I want to compare the whites of the paper and the charcoal tones across photos, I look for matching light settings and a reference card. Around 29% of consumers prioritise consistent tone reproduction. |
| Complete setup |
Check the contents list for the exact version: number of panels, diffusers, stands and power supplies. Allow for the space you have around your work too. |
When I don’t yet have suitable stands or a second lamp, I want to know exactly which parts are included in the set. Around 21% of consumers put a complete setup first. |
| Power and portability |
Check whether a mains adapter is included and which type of battery the panel uses. Also check whether batteries are actually included with the version you’ve chosen. |
When I’m photographing somewhere without a mains socket, I want to know in advance which batteries and any charger I’ll need. Around 14% of consumers prioritise portability. |
Joybuy products
Related products coming soon.
Frequently asked questions
How should I position the lights and camera?
Start with two diffused lights on either side of the drawing, at similar distances, and check the photo for differences in brightness and any reflections. Use the same type of light source on both sides and avoid mixed lighting. Getty’s guidance was originally written for sculptures, so taking a test photo of your own paper is important.
Is a high CRI enough to produce an accurate documentary photo?
No. A high CRI alone doesn’t guarantee an accurate photo. Getty also recommends using a standard colour and scale card for documentary photography. Avoid mixed lighting in your setup and check your camera settings too.
What checks should I carry out when using and maintaining a panel?
Follow the manual for your exact model when it comes to power, mounting and operating conditions. The Godox manual, for example, warns against moisture and says to remove the batteries before storing the panel for a long period. Don’t apply these model-specific instructions to other lights without checking.
What if a panel I bought online disappoints or breaks soon after?
For online consumer purchases in the Netherlands, you generally have a statutory cooling-off period of up to 14 days after delivery, with some exceptions. Your statutory guarantee is separate from any manufacturer’s guarantee. If a product doesn’t meet what you could reasonably expect under normal use, the seller is responsible for providing an appropriate solution. ACM ConsuWijzer explains these rules.
Does an LED photo panel need a CE mark in the Netherlands?
The Netherlands Food and Consumer Product Safety Authority states that CE marking is required for electrical consumer products covered by the relevant rules. According to the European Union, the manufacturer uses the mark to indicate that the product meets the applicable EU product rules. It isn’t an independent measurement of light output or colour reproduction. Check the information for the specific lamp and power supply.