Who is this choice relevant to?

Photographing full sheets

You want to capture the calligraphy clearly from edge to edge and can position lights on both sides of the sheet. Art Storefronts Support Center recommends lighting from either side as a starting point for even reproduction.

Working with glossy ink

You want to avoid distracting hotspots or bring out the texture of the brushstrokes. It’s worth testing the lighting angle: the Smithsonian Institution Archives describes diffusion as one way to reduce reflections.

Using a shared table

You need to set up and pack away lights and cables regularly. Compare the dimensions, mounting options and power supply of the exact version with the space available.

What should you look for when choosing?

What to consider What should you check? Who should pay particular attention?
Even lighting across the sheet In a test shot, compare the centre with all four corners. Check whether you have room for light sources on both sides. If I want to capture the whole sheet clearly from edge to edge, I pay particular attention to how the corners are lit. Around 33% of consumers prioritise even lighting across the entire sheet.
Reflections and brush texture Move the panel and compare test shots from the intended camera position. Also check whether diffusion works well with your paper and ink. With glossy ink, I want to reduce distracting hotspots without unnecessarily flattening the texture of the brushwork. Around 27% of consumers prioritise controlling reflections or keeping the brush texture visible.
Paper and ink colour Set the white balance for the light you’re using and compare a test shot. An adjustable colour temperature alone doesn’t guarantee accurate colour reproduction. If I want to compare paper and ink colours between shots, I need to be able to recreate the lighting conditions and camera settings. Around 20% of consumers prioritise consistent colour reproduction.
Setting up and packing away Check the panel dimensions, mounting options, mains adapter and any batteries included with the exact version you’re choosing. When the worktable is shared, I want to be able to set up and pack away lights and cables quickly. Around 20% of consumers prioritise a compact, practical set-up.

Things to watch out for when buying

  • Assuming the highest lux value means the best lighting

    Without the same measuring distance, settings and light modifier, a lux reading tells you little about how evenly a full sheet of calligraphy will be lit.

    Only compare readings taken on the same basis, and use a test shot to assess the lighting in the centre and corners.

  • Assuming one standalone light is a complete two-light set-up

    You’ll need two safe places to position two light sources, and accessories and power options can vary between versions.

    Check the contents of the exact set and plan the available space and cable routing. A two-light set-up may require a second panel, mount or stand.

  • Assuming reflection-free light will show the ink’s texture

    Light that reduces shadows and reflections can also soften the visible texture of the brushstrokes.

    Decide whether a flat reproduction or visible texture matters more, then adjust the lighting angle based on test shots.

Brands to consider

Godox

The LEDP260C is an adjustable white panel for putting together a one- or two-light set-up.

  • The Godox manual lists an adjustable colour temperature of 3300–5600 K.
  • Check the model code of the version on offer, and whether it includes the mains adapter or the batteries you need.

amaran

The P60x is an adjustable white panel for anyone looking to use a light modifier and position their lighting flexibly.

  • According to Aputure’s product manual, the P60x has an adjustable colour temperature of 3200–6500 K.
  • Check whether your chosen set includes the softbox, grid and mains power supply you want. Batteries may not be included as standard.

Nanlite

The PavoSlim 60B is a panel to consider if you want to use diffusion or a softbox in your set-up.

  • The listed version may suit a set-up where you want to soften the light.
  • Check what’s in the box and whether you’ll need to provide a light stand. Make sure you have enough room for your set-up.

SmallRig

The Vibe P96 range includes compact mini lights for close-up shots or a small workspace.

  • A compact light can be practical if you often need to clear a shared workspace.
  • Check the exact model code and test whether the light covers the whole sheet. Its size alone won’t tell you that.

Joybuy products

Related products will be available soon.

Frequently asked questions

How do I get started photographing a full sheet of calligraphy?

Lay the sheet flat and take a test shot from the intended camera position. Art Storefronts Support Center recommends two light sources on either side, angled at around 45 degrees, as a starting point for even reproduction. Adjust the distance and angle to suit your sheet, and check all four corners.

Does a diffuser always help reduce glare?

No. Diffused light won’t eliminate all reflections in every set-up. The result also depends on the ink, paper and angle between the light, sheet and camera. Move the light and compare test shots.

Will I need a stand or batteries with a panel?

That depends on the exact set and how you want to position the panel. The amaran P60x manual describes the panel’s settings, but the contents of a set for sale can vary. Check whether it includes the light modifiers, mains power supply, batteries and mounting equipment you need.

What can I do if a panel I bought online isn’t suitable or turns out to be faulty?

When you buy online, the seller must tell you about the cooling-off period. According to Rijksoverheid, it is usually 14 days, although exceptions apply. Faulty products may also be covered by the statutory guarantee. ACM ConsuWijzer explains that this has no fixed time limit and is separate from any manufacturer’s warranty.

What safety requirements apply to an electric LED panel in the Netherlands?

Electrical equipment sold in the Netherlands must meet the relevant European requirements. Business.gov.nl outlines manufacturers’ responsibilities, including CE marking and an EU declaration of conformity. Check the information for the exact version; this alone doesn’t confirm that an individual panel complies.