Filming a whole game board
You film the board from above or at an angle and want hands, text and playing pieces to remain visible. Consider how widely and softly the light spreads, and where you can position the panel.
Choose a dimmable panel that you can position at an angle beside the game board and soften the light from; check a test recording to make sure hands, cards and glossy pieces remain clearly visible. A second light can help fill in shadows, but it needs extra space and mounting equipment. Before buying, compare the exact version, mounting options, power supply and what’s included, and check which product safety requirements apply to that version.
You film the board from above or at an angle and want hands, text and playing pieces to remain visible. Consider how widely and softly the light spreads, and where you can position the panel.
You record the same explanation on different days and want card colours and white paper to look consistent. Adjustable white light can help you fine-tune the lighting; make sure you also set your camera’s white balance consistently.
You want to clear the table and floor again once filming is over. So check the mounting options, cables and which parts are included with the version you choose.
Choose this if: you want to light the whole board from a fixed camera angle and have space to position the panel securely beside the table.
Bear in mind: a stand takes up floor space and isn’t always included in the set.
Choose this if: hands cast shadows over text or playing pieces when using one light, and you have space on both sides of the board.
Bear in mind: a second light needs extra mounting equipment, power and space; you’ll still need to check for reflections in a test recording.
Choose this if: you want to tidy the room quickly or can’t fit a large stand, and a test shows that the board is clearly visible from that position.
Bear in mind: check that the clamp fits and that the power supply you choose will last for the duration of your recording.
First decide whether clear visibility of the board, consistent colours or easy tidying matters most to you. Then test the light with your own camera angle and game equipment.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Clear visibility of the board | Check the diffuser, adjustable mount and space for the panel and stand. Make a test recording with moving hands and cards being turned, or glossy pieces in play. | When I film the whole game board, I want hands and game information to remain easy to read, without harsh shadows or reflections. Around 36% of consumers prioritise clear visibility of the board. |
| Consistent colours | Compare the white-light adjustment range and the colour-rendering claim for the exact version. Test it with a white card under the lighting you’ll actually use. | When I record on different days, I want card colours to remain recognisable and not just look right on screen. Around 29% of consumers prioritise colour consistency. |
| Space and mounting | Check the dimensions, clamp opening or stand fitting, and which holder is actually included. | When I want to use the spare room again after filming, I’m looking for a mount that fits and is quick to put away. Around 21% of consumers prioritise compact mounting. |
| Stable video | Make a short test video using your intended camera settings and dimming level. For longer recordings, check that the power supply is suitable for the planned recording time. | When I want to record a full explanation in one go, I want to know whether the picture remains stable with my camera and light settings. Around 14% of consumers prioritise stable lighting and power. |
An awkward angle can still create harsh shadows or bright reflections, even if the lamp produces enough light.
Make a test recording of the whole board while you play, paying particular attention to moving hands and glossy pieces.
Depending on your set-up, you may need a diffuser, a suitable holder or a second light.
The NEEWER NL660 is available with or without a stand; you’ll need to buy a stand separately for the Godox P260C Pro. NEEWER also lists NP-F batteries as sold separately.
Compare what’s included with the exact version against the mounting equipment and power supply you need.
A separate holder, stand or suitable battery may mean extra preparation before you can record.
The manufacturer gives a range of 3200–6500 K for the VL120 Bi-Color; the VL120 RGB has a different model name and a different stated range.
Check the full model name and the specifications for the version you’re looking at, not just the ‘VL120’ label.
The final image also depends on your camera settings, dimming level, white balance and other light in the room. Canon explains that some LED light sources can cause bands to appear in footage.
Make a short test with your intended settings and check for both bands and recognisable card colours.
The NL660 is a dimmable bi-colour panel with a diffuser, designed to be angled towards the game board. The manufacturer offers versions with and without a stand.
The P260C Pro is a larger, diffused bi-colour panel with a tilting mount, designed for a fixed filming position.
The P60x is a bi-colour panel. The manufacturer lists a softbox and grid as included, to help shape the light in a fixed table-top set-up.
The dimmable Key Light has an adjustable mount and may be a good option if you have a suitable table edge and limited floor space.
The VIJIM VL120 Bi-Color is a small battery-powered panel for anyone who wants to pack the light away quickly after filming.
Start with one softened panel at an angle beside the board, then make a test recording while explaining a typical move. If text is still in shadow, try adding fill light from the other side; the result depends on the table, camera angle and light position.
Test the lamp at your intended dimming level with your own camera before recording the full explanation. Canon explains that some LED light sources can cause bands, so a flicker-free claim doesn’t guarantee the same results with every camera set-up.
For each version, check whether a stand or clamp, diffuser, adapter and any battery are included. NEEWER sells the NL660 with and without a stand and lists the NP-F battery separately; Godox states that a stand is needed separately for the P260C Pro.
When you buy from a business at a distance, you generally have 14 days to change your mind, but exceptions and the terms of purchase matter. The Dutch government advises checking the seller’s information.
An LED video panel must carry the required CE marking if it falls under EU rules that require it. The requirements depend on the exact product version; Godox’s declaration for the P260C Pro does not automatically apply to other models.