Close-up filming at the workbench
You film the needle and stitches as your hands and tools move. You want to be able to reposition the light and soften shadows. Canon Europe discusses using key and fill lights for video and product photography.
Choose a panel that you can position at an angle beside or above the leather, and soften its light if needed. This will help you see whether your hands are casting shadows over the stitches. Then compare the adjustable colour temperature, stated colour-rendering performance and power supply. Test for flicker using your own camera settings too, as product specifications alone cannot guarantee that every recording will be free of banding.
You film the needle and stitches as your hands and tools move. You want to be able to reposition the light and soften shadows. Canon Europe discusses using key and fill lights for video and product photography.
You show different leather and thread colours, and want to combine adjustable, consistent white light with a fixed white balance on your camera. Manufacturers state the colour temperature and colour-rendering performance for each model, but these figures do not measure the colours in your footage.
You need to fit the light, stand and power supply into a limited workspace, and decide whether a larger key light or a compact fill light is better suited to your set-up.
First, work out where you can position the panel and how you want to soften harsh shadows from your hands. Then compare colour settings and power options, and test the light using the camera settings you plan to use for filming.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Keeping the stitching visible | Check whether you can position the panel and a diffuser at an angle beside or above your work. See if you can add fill light to the shadow side when needed. | If my hands often cover the stitch line, I want to be able to adjust the direction of the light without moving my camera. Around 31% of consumers say avoiding hand shadows is their top priority. |
| Leather and thread colours | Compare the stated colour temperature and CRI/TLCI of the exact model, then make a test recording using a fixed white balance and the leather you plan to film. | If you want to show leather and thread colours clearly, it helps to have control over the white light and your camera’s white balance. Around 25% of consumers put colour rendering first. |
| Flicker in video | Make a test video using your own camera, frame rate, shutter speed and the dimming level you plan to use. | If I want to record close-ups without visible banding, I want to test the light with my own camera settings. Around 25% of consumers put usable video without visible banding at the top of their list. |
| Space and power | Check the mounting options, included stand or adapter, and what type of battery is needed and whether it is included. | When my workspace is short on room, the light needs to fit without getting in the way of my hands or framing. Around 19% of consumers say space and power are their main considerations. |
A lux figure applies to a particular measuring distance and set-up. Aputure lists different illuminance levels for the amaran P60x at different distances. On its own, a figure like this does not tell you how much light will reach your stitch line.
Only compare figures measured at the same distance and in a relevant set-up, and assess the lighting with the diffuser you plan to use.
Ulanzi describes the VL81 as a compact light for mobile use. The available information does not make it clear whether a single light will cover the entire work surface as a key light.
Consider using a compact light for local fill, unless a test set-up shows that one light illuminates your entire frame well enough.
NEEWER offers the NL660 as a light on its own or in a version with a stand. The manufacturer says compatible NP-F batteries are not included.
Check the contents of the exact version before you order.
Colour rendering and flicker are separate properties. Sony explains that flicker can cause banding or colour changes in video; a CRI or TLCI rating does not answer this question.
Assess colour using your own leather, and test separately for flicker at your preferred dimming level and with your camera settings.
The P60x is a bi-colour panel for adjustable white key light, while the P60c also offers RGBWW features.
The P260C Pro is a bi-colour panel with built-in diffusion and controls on the panel or via Bluetooth.
The NL660 is worth considering if you want an adjustable light on a fixed stand.
The compact, rechargeable VL81 could work as a local fill light when space is limited.
Start with a key light positioned at an angle, then check where the shadow from your hand falls on your camera monitor. Move the light or add a lower level of fill light from the opposite side. A suitable softbox or diffuser can help if the shadow edge is too harsh.
First, try a different shutter speed with the same light and dimming level. Sony Support says that changing the shutter speed can reduce flicker; the setting that works depends on your camera and recording conditions.
Check whether the version you choose includes a stand, diffuser, mains adapter and any required batteries. The contents of the NEEWER NL660 vary between the light-only version and the one with a stand; NEEWER says compatible NP-F batteries are not included.
The panel must meet the European requirements that apply to the specific version. According to Business.gov.nl, once the required assessment has been carried out, the responsible manufacturer affixes the CE marking and draws up an EU declaration of conformity. A version with a radio module may also be subject to radio equipment regulations.
When you use a product normally, you are entitled to expect it to meet reasonable expectations under your agreement with the seller; a manufacturer’s guarantee does not replace this legal right. According to Business.gov.nl, consumers buying online generally have a 14-day cooling-off period from the day after delivery, subject to applicable exceptions.