Who is this for?

Maker reproducing prints

You want to capture the paper, ink and entire print as accurately as possible in a single shot. Even lighting and suitable white balance matter more than lighting effects. The National Museum of Women in the Arts recommends aiming for even light when photographing flat work such as prints; Canon Europe explains that white balance is adjusted to achieve the desired result.

Maker with a small table

You need to leave room for the print and a camera positioned above it. The panel size, mounting options and ability to direct the light all affect whether the lamp will fit alongside your camera setup.

Maker who sets up each time

You put your setup away after use or move it regularly. It’s worth weighing up a compact battery-powered panel against a larger setup with a mains power supply, and factoring the stands and accessories you’ll need into your choice.

What should you look for?

Two similar panels

When: If you have room on both sides of the print and want to build up even lighting across the whole surface.

Trade-off: You’ll need more space, mounting points and possibly two power supplies. Also check for reflections and compare the brightness at both edges.

One larger, diffused panel

When: If you have a fixed place to take photos but no room for two light sources.

Trade-off: The panel and stand take up more space. Test whether the light reaches the whole print.

Compact battery-powered panel

When: If you need to set up quickly and keep table space to a minimum, for example for a small print or as supplementary lighting.

Trade-off: Check the light at the far edge and whether the battery will last for your desired shooting time.

What to consider What to look for Who it matters to
Even lighting Check the centre and all four corners in a test shot. See whether one or two panels will fit at an angle beside the print. I want to reproduce the whole print evenly and am particularly alert to bright spots or dark edges; around 36% of consumers give even lighting top priority.
Paper and ink colour Compare the adjustable colour temperature of the exact version and keep the lighting setup consistent throughout a session. I want to reproduce the paper’s whiteness and ink colours consistently across repeated shots; around 29% of consumers put colour accuracy first.
Space and mounting Measure the available table space and mounting points. Check whether a stand is included and whether you can position the panel out of shot. I need to fit the lamp alongside my camera and print without obstructing the setup; around 21% of consumers say limited table space is their biggest consideration.
Power and what’s included Check whether a stand and power supply are included, and whether a battery or mains power suits the length of your shooting session. I want to know what I’ll need to use and power the lamp on my table; around 14% of consumers prioritise a complete setup that’s easy to power.

Common buying mistakes

  • Assuming a high CRI guarantees accurate colour in photos

    A stated CRI is a product specification. White balance and the light that actually falls on the print also affect the shot.

    Compare the specifications for the exact version and take a test shot alongside the original using the same lighting settings.

  • Comparing only the panel, not the complete setup

    Stands, adapters and batteries can vary between versions. If you use two light sources, you may also need two sets of mounting or power accessories.

    Check what’s included with the exact version and measure whether the required stands will fit on your table.

  • Treating the VL49 and VL49 RGB as the same product

    Ulanzi lists fixed 5500 K daylight for the standard VL49 and adjustable white light for the VL49 RGB. They are different versions.

    Check the full model name and available colour settings before choosing a version.

Brands to consider

NEEWER

The NL-116AI is a small bi-colour panel for a tabletop setup; the NL660 is a separate range for a more spacious setup.

  • NEEWER lists a built-in battery and adjustable white light for the NL-116AI.
  • The stand included with the NL660 depends on the version; the NP-F batteries mentioned are not included. These specifications are not an independent lighting test of linocuts.

Ulanzi

The VL49 RGB is a compact panel with magnetic mounting; the VL81 is another compact range with adjustable white light.

  • Ulanzi lists a built-in battery and adjustable colour temperature for the VL49 RGB.
  • Don’t confuse the RGB version with the standard VL49, which has a fixed colour temperature. With a small panel, check that it covers the whole print sufficiently.

Godox

The P260C Pro is a larger diffused panel to consider if you have room outside your small table for mounting it.

  • According to Godox, the P260C Pro has adjustable white light from 2800–6500 K and an average CRI of at least 98.
  • These are manufacturer figures, not an independent measurement of the print. Its stated dimensions of around 33 × 32 cm including the handle make it worth measuring your workspace.

SmallRig

The P96 3286 is a small battery-powered panel to consider as portable or supplementary lighting.

  • For this version, SmallRig lists adjustable white light from 2700–6500 K and 150 lux at 1 m.
  • That light output at one measurement distance doesn’t show that a single P96 will evenly light an entire linocut.

Joybuy products

These Joybuy products are compact lights for photography. Check how evenly the light covers the entire print and whether the mounting suits your table.

Ulanzi VL49 RGB LED video light with 2000 mAh battery

Ulanzi VL49 RGB with 2000 mAh battery

This compact battery-powered version could suit you if table space is limited and you want to move or store the light after use.

The product name lists an adjustable colour temperature of 2500–9500 K, dimming and a magnet on the back.

Use a suitable 5V adapter. Avoid fast chargers with a higher voltage and don’t use the light in damp conditions. Before buying, check the applicable CE marking for this version and any included power supply.

View on Joybuy
Ulanzi LM001 portable mini fill light with 500 mAh battery

Ulanzi LM001 Mini Fill Light with 500 mAh battery

This portable mini light could suit you if you need a compact light with magnetic mounting. Check that the mounting works with your tabletop setup.

The product name lists a 500 mAh battery and magnetic mounting.

Before buying, check the applicable CE marking for this version and any included power supply.

View on Joybuy

Frequently asked questions

Do I need two LED panels for one linocut?

Not for every print. Two similar light sources angled on either side are a useful starting point for evenly lighting flat work. If you use one panel, check the edges and look for any reflections in a test shot.

How do I position the camera and lights without photographing the print at an angle?

Keep the camera parallel to the print and check that its edges appear straight in the shot. If reflections are a problem, move the lights first rather than changing the camera angle straight away.

How can I keep paper whites and ink colours consistent?

Use a consistent lighting setup and adjust the white balance to suit the light falling on the print. Adjustable colour temperature gives you a way to tailor the light, but also check the camera settings and compare the shot with the original.

Do I need to buy a separate battery or tripod?

It depends on the exact version. NEEWER lists a built-in battery for the NL-116AI; whether a tripod is included with the NL660 varies by version, and the NP-F batteries mentioned are not included. Check what’s in the box for your chosen model before ordering.

Which UK product safety requirement should I check for an electric photography panel?

According to the NVWA, CE marking is compulsory for electrical products covered by the Dutch Electrical Equipment (Commodities) Decree. Check the applicable product information for the specific panel and, if included, its power supply. A general statement about a brand does not confirm that an individual version complies.