Who is this for?

Leathercraft detail filmmaker

You want to capture stitches, holes and leather colour clearly, and can position the light and camera around a single work area.

Maker sharing a bedroom

You want to keep the light on your work area and choose a setup that fits the available space. Direction, diffusion and suitable mounting are all important.

Maker who packs away after every session

You want a panel that’s quick to put away, and need to weigh up battery life, power supply and mounting against the amount of light reaching your work area.

What should you look for?

First decide how much of your work area you want to light and how much space your setup can take up. Then compare the light controls and test the complete setup with your camera.

The percentages below show the main purchasing priority when filming leather stitching in a shared bedroom.

What to consider What to look for Who is this important for?
Stitching and leather colour Compare adjustable white light, dimming and a diffuser; test the same area of leather using the same camera white balance. If I want to capture stitches and colour clearly, I pay attention to the direction of the light and harsh highlights. Around 29% of consumers prioritise detail and leather colour.
Light in a shared room Check whether you can direct and shield the panel, and whether its size and mounting will work in the room. If I’m filming while someone else is using the bedroom, I want to keep the light on my work area without an awkward setup. Around 29% of consumers give top priority to minimising disruption.
Banding in footage Record a test using your intended brightness, frame rate and shutter speed; repeat the test after making adjustments. If I’m recording video, I want to avoid bands appearing in the footage. Around 24% of consumers prioritise stable-looking footage.
Setting up and packing away Check the power supply, included adapter and mounting; only compare brightness when measured at the same distance. If I want to clear the room again after every session, size and power supply factor into my choice. Around 18% of consumers give quick setup and pack-away their top priority.

Things to watch out for when buying

  • Relying on a lux rating without knowing the measurement distance

    A quoted brightness applies at a particular distance and sometimes with a specific colour setting. Adding a diffuser or changing the position can alter the light reaching your work area.

    Only compare figures measured on the same basis, and record a test at the distance you’ll actually use.

  • Assuming a compact panel is interchangeable with a larger bi-colour panel

    A small panel and a larger panel aren’t automatically interchangeable for the same work area. The full model name matters too: the VIJIM VL120 Bi-Color reviewed here isn’t necessarily the same version as the VL120RGB.

    Before buying, compare the full model name, lighting features, power supply and package contents.

    A different version may have different lighting features or mounting.

  • Assuming every version includes the same accessories

    NEEWER says the NP-F battery isn’t included with the NL660; whether a stand is included also depends on the version you choose.

    Check that your chosen version includes the light, the mounting you want, a power supply and a diffuser.

    You may need to buy a compatible mount, stand or battery separately for your preferred setup.

  • Assuming a flicker-free claim guarantees results with every video setting

    Visible bands can occur because of the interaction between the light source and your camera settings.

    Test with the camera and light mode you’ll actually use. If bands appear, adjust the shutter speed if possible and record another test.

Relevant brands for this use

NEEWER

The NL660 is a larger bi-colour panel worth comparing if you want to light a specific work area. NEEWER says this model comes with barn doors and a diffuser.

  • NEEWER lists 3200–5600 K, dimming and CRI 96+ for the NL660.
  • NEEWER says the NP-F battery isn’t included; choosing a version with a stand is a separate option. These are manufacturer specifications, not independent measurements of your setup.

Godox

The P260C Pro is a slim bi-colour panel with built-in diffusion, designed for uses including content creation. Godox lists controls on the unit and via an app.

  • Godox specifies 2800–6500 K and an average CRI/TLCI ≥98 for the P260C Pro.
  • Godox’s claims about softer light and colour rendering come from the manufacturer. Check that the mounting and power supply for your chosen version suit your setup.

amaran

Consider the P60c, an RGBWW panel, if you want to create deliberately coloured scenes as well as using white light.

  • amaran lists an adjustable range of 2500–7500 K and 5900 lux at 1 m at 5600 K for the P60c; this brightness figure applies at the stated distance and setting.
  • You don’t need coloured lighting features to film leather stitching in neutral white light. amaran lists two NP-F batteries as an alternative power option.

SmallRig

SmallRig describes the P96 as a small battery-powered panel with a cold-shoe mount and USB-C charging cable.

  • SmallRig specifies 2700–6500 K and 150 lux at 1 m for the P96.
  • SmallRig gives battery life figures of around 100 and 105 minutes in different places. Treat these as manufacturer estimates and check what your recording setup requires.

Ulanzi

The VIJIM VL120 Bi-Color is a small panel worth comparing if you’re looking for a compact setup with adjustable white light.

  • Ulanzi lists 3200–6500 K, a 3100 mAh battery and a silicone diffuser for this model.
  • Ulanzi’s battery life figures aren’t clearly labelled as applying to maximum or minimum brightness. Don’t assume a set run time for each mode, and don’t confuse this model with the VL120RGB.

Joybuy products

Related products will be available soon.

Frequently asked questions

How can I avoid harsh glare or dark stitches on the leather?

Angle the panel from the side or above your work area, then record a test with and without a diffuser. Adobe explains that diffusion can soften harsh shadows and highlights; also check that the stitches still have enough definition in the footage.

What can I do if horizontal bands appear in my video?

Test with your own camera and the light mode you’re using to see whether a different shutter speed helps. For areas with a 50 Hz mains frequency, Sony suggests 1/50 or 1/100 second as possible settings; results depend on the camera and scene.

Does an LED panel always come with a battery, adapter or stand?

No, what’s included varies by model and version. NEEWER lists a mains adapter as included with the NL660, but the NP-F battery isn’t included; whether a stand comes with it depends on the version you choose. Check the exact package contents before choosing your setup.

Is a CE mark enough to tell whether a video light complies with the rules?

No. For electrical equipment that must carry a CE mark under the relevant EU rules, the system also includes the relevant conformity assessment and EU declaration of conformity. The requirements that apply depend on the version and its features; a CE mark on its own doesn’t prove that an individual product meets every requirement.

What are my rights when buying online or if a product develops a fault early?

For a standard online consumer purchase, you’ll generally have a statutory 14-day cooling-off period from delivery, with some exceptions. You’re also entitled to a product that performs as you could reasonably expect under normal use. ACM ConsuWijzer explains that if a product develops a fault too soon, the seller must provide an appropriate remedy at no cost; a manufacturer’s guarantee doesn’t replace your statutory rights.