Maker filming the whole work surface
You film your hands, paintbrush and ceramics at the same time, and want to position the light so it stays out of shot.
Choose an adjustable, dimmable panel that can light both your hands and the ceramics on your work surface. Then consider the colour temperature, power supply and mounting options that suit your studio. Manufacturer specifications are useful for comparisons, but a test recording with your own camera and class lighting will show how shadows, colours and any flicker appear.
You film your hands, paintbrush and ceramics at the same time, and want to position the light so it stays out of shot.
You demonstrate colour choices and want to keep the lighting and camera white balance consistent throughout the lesson.
You want to position or move the light without a tripod, cables or battery getting in the way of your lesson.
Start by checking how well it covers your work surface, then look at colour rendition, flicker and practical setup.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Visibility across the work surface | Check the panel size and whether it can be angled. Make a test recording from the camera angle you plan to use. | If I want to film my hands and the ceramics at the same time, the whole work surface needs to be clearly visible in shot. Around 33% of consumers put work-surface coverage first. |
| Accurate paint colours | Compare the adjustable colour temperature and the stated CRI and TLCI ratings for the exact model. Check the colours in a test recording with a fixed white balance. | If I explain paint colours step by step, I want them to remain recognisable under the same lighting. Around 27% of consumers put colour consistency first. |
| Flicker in video | Test a short clip using the settings you plan to use. Sony recommends adjusting the shutter speed, among other things, if flicker is visible. | If I record lesson videos, I don’t want distracting bands in shot. Around 20% of consumers put flicker-free video with no visible flicker first. |
| Positioning and power | Check the mounting options and the contents listed for the exact version, including the adapter, battery and tripod. | If my studio is short on space or I want to move the light, the setup needs to be practical for the whole lesson. Around 20% of consumers put positioning, power and a complete kit first. |
The CRI and TLCI ratings Aputure and Godox list for their models are manufacturer specifications. White balance and other light in the room can also affect how paint colours appear on screen.
Record the same paint using the lighting and camera settings you plan to use during the lesson, then review the footage.
SmallRig lists an illuminance of 150 lux at 1 metre for its compact P96. This specification does not show that the light can illuminate an entire painting table.
Assess the whole table from the camera angle you plan to use, not just a close-up.
A larger panel or an additional light may still be needed to cover a bigger work surface.
NEEWER lists an adapter with the NL660, but the NP-F batteries are not included. Only the version labelled ‘with Stand’ lists a tripod.
Before buying, check what’s included with the exact version.
You may need to buy a suitable tripod or battery separately.
The P60x is a bi-colour panel worth comparing if you’re looking for a larger, adjustable light for a fixed setup.
The P260C Pro is worth comparing if you’re looking for built-in diffusion and several power options.
The NL660 is a bi-colour panel, and whether you choose the version with or without a tripod affects your setup.
The P96 is a compact light to consider as a focused fill light in a small setup.
The VL81 is a portable supplementary light that can be mounted on a camera or a suitable support.
Position the light where you intend to use it, make a test recording and check the white balance under the same lighting you’ll use during the lesson. Nikon explains that white balance and mixed lighting can affect the colours in your footage.
Start by recording a short clip with the lights on and checking the result. Sony recommends adjusting the shutter speed, among other things, if flicker occurs. For areas with a mains frequency of 50 Hz, Sony suggests 1/50 or 1/100 second, depending on the camera and situation.
That depends on the model and version. NEEWER lists an adapter for the NL660, but no NP-F battery; a tripod is listed for the separate version labelled ‘with Stand’. Check the contents listed for the version you’re considering.
Electrical equipment placed on the market in the Netherlands must comply with the applicable European product regulations. According to Business.gov.nl, manufacturers of equipment covered by these requirements must, among other things, affix a CE mark and draw up an EU declaration of conformity. A model declaration does not automatically verify every individual item offered for sale.
For a consumer purchase, contact the seller about your legal guarantee if the product does not meet what you could reasonably expect under normal use, according to ACM ConsuWijzer. Different rules apply to business purchases, so don’t assume the same consumer rights apply.