Who is this relevant for?

Makers of glossy mugs

You want to show off the glaze and the mug’s curved shape without a bright reflection dominating the surface. Orbitvu Netherlands identifies reflections as something to watch out for when photographing glossy ceramics.

Makers of mugs with colour-sensitive glazes

You photograph a range of pieces and want to preserve subtle colour differences by using consistent lighting settings and white balance. Adobe explains how white balance affects the colours in a photo.

Makers with a small photography table

You photograph individual mugs and need to fit the panel into a limited space.

What should you look for when buying?

Don’t just consider the light itself: when photographing mugs, the angle of reflection, consistent colour settings and the space needed for the panel and accessories all matter too.

What to consider What should you check? Who is this important for?
Reflections and shape Check whether you can use a diffuser and position the panel outside the direct reflection angle. When I photograph glossy mugs, I want to minimise distracting bright spots without losing the mug’s curved shape. Around 36% of consumers prioritise reflection control.
Consistent glaze colours Compare the adjustable colour temperature and check the white balance with a test shot of your own glaze. When colours vary subtly, I want to set my lighting and white balance deliberately and keep them consistent across a series of photos. Around 29% of consumers give colour consistency top priority.
Positioning on a small table Measure the available space and check the dimensions, mounting method and power supply for the exact model. If my photography table has limited space, I need to be able to position the panel easily where I want it. Around 21% of consumers prioritise how easy it is to position.
A repeatable set-up Check the packing list for panels, stands, diffusers, adapters and any batteries. For portfolio photos I take regularly, I want a set-up I can use again, with clearly listed components. Around 14% of consumers prioritise having a complete kit.

Common buying mistakes

  • Choosing on brightness or CRI alone

    A bright light can show up as a reflection on glossy glaze. A CRI specification alone does not tell you how accurately colours will appear in the final photo; white balance also plays a part.

    Consider the angle and diffusion, and take a test shot of your own mug before choosing a model.

  • Mistaking a standalone light for a complete lighting kit

    The power supply and accessories included vary by model and version. A stand, diffuser or battery may be missing or optional.

    If a component you need isn’t on the packing list, you may have to buy it separately.

    Compare the packing list for the exact version with what you need to position and power the panel.

  • Assuming two panels will automatically give you better photos

    Two light sources can create two visible reflections on a glossy mug. Light that is too even can also make texture and shape less distinct.

    Start with one main light and add fill light only if the shadow side needs it for your photos.

Relevant brands

Godox

The LEDP260C is a standalone panel; the compact C30Bi and the LP600R K2 two-panel kit suit different set-ups.

  • Godox says the LEDP260C has adjustable white light and notes that NP-F970 batteries are available separately. For the C30Bi, the manufacturer quotes a runtime of around 45 minutes at full brightness.
  • Check the packing list for the exact version. The quoted battery life and lighting settings do not measure the quality of photos of your mugs.

amaran

The P60x is a bi-colour panel supplied with a softbox, designed for a larger, shaped-light set-up.

  • amaran lists an adjustable colour temperature of 3200–6500 K and a softbox for this version.
  • Before comparing it with another variant, check that the accessories and specifications apply to the exact version you’re considering.

NEEWER

The NL660 is a standalone bi-colour panel which, according to NEEWER, is available with or without a stand.

  • NEEWER lists a colour temperature of 3200–5600 K, a diffuser and a mains adapter for the NL660.
  • The manufacturer says an NP-F battery is not included. The quoted colour-rendering value is a manufacturer specification, not an assessment of photos of your glaze.

Nanlite

The PavoSlim 60B is a slim bi-colour panel for a set-up using separate light modifiers.

  • Two diffusers, a softbox and a grid are listed for this version.
  • When buying, check that the specifications and accessories are explicitly listed for the PavoSlim 60B, rather than another version.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should you position the light for a mug with a glossy glaze?

Start with one portable, diffused light source beside or slightly above the mug, and see where it appears in the glaze. Adjust the angle or diffusion and take a test shot. Don’t soften every shadow if you want to retain the mug’s curved shape and texture.

Is a high CRI value enough to capture glaze colours accurately?

No. A stated CRI value alone does not guarantee the colours in the final photo. White balance affects them too, so keep the lighting settings consistent across a series and check a test shot of the actual glaze.

Do you need to buy a stand or battery separately?

It depends on the exact version. The LP600R K2 kit is listed with two stands, while Godox says that NP-F970 batteries for using the LEDP260C without mains power must be bought separately. Check the packing list before ordering.

What guarantee applies to an LED panel bought as a consumer in the Netherlands?

According to ACM ConsuWijzer, you’re entitled to a statutory guarantee if a product does not perform as you could reasonably expect under normal use. The retailer is your point of contact. Any manufacturer’s or retailer’s guarantee is separate and does not automatically determine how long your statutory rights last.

Is CE marking required for an electric photography panel sold in the Netherlands?

Applicable European safety requirements apply to electrical and electronic equipment. If CE marking is required for the device in question, the manufacturer must apply it and draw up an EU Declaration of Conformity. Check the information for the exact model on offer; a declaration for a different light or version is not sufficient. Business.gov.nl explains these requirements for the Dutch market.