Who is this setup for?

Audio drama makers who edit voices separately

Recording several performers at once and want to adjust their voice levels individually later? Check not only how many microphones there are, but also whether the receiver and recorder save the signals on separate channels. RØDE describes split mode for the Wireless PRO and Wireless Micro Camera Kit.

Performers with existing recording equipment

If you want to keep using a phone, transmitter or recorder, make sure the microphone plug matches the exact microphone input. The RØDE Lavalier GO has a 3.5 mm TRS plug; the Shure MVL has a 3.5 mm TRRS plug. That’s why it’s worth checking the connection before you buy.

Actors who move during the performance

Having room to move can be useful when performers stand up or change position, but cables and clothing can create noise. RØDE recommends paying attention to lavalier cable placement and strain relief, so make sure you test the movements in your scene too.

What should you look for in a lavalier microphone for an audio drama?

Start by deciding how many voices you want to record and monitor at the same time. Then choose between wired and wireless, based on your inputs and how much room performers have to move around the table.

What to consider What to look for Who should pay particular attention?
Editing voices separately Check the number of microphones, the channel mode and how many separate channels the recorder actually saves. If I want to adjust dialogue for each performer afterwards, I need separate recording channels. Around 36% of consumers prioritise editing voices separately.
Connecting to existing equipment Compare the exact plug, such as 3.5 mm TRS or TRRS, with the input on your phone, recorder or transmitter. If I want to use my current phone, recorder or transmitter, the microphone must be compatible with it. Around 29% of consumers prioritise compatibility with existing equipment.
Clothing and cable noise Test the mounting position, clothing friction and cable movement during a test scene. If I have an actor moving around, I want to hear whether fabric or a tugging cable interferes with the recording. Around 21% of consumers prioritise reducing clothing and cable noise.
Freedom of movement Check how many transmitters can work at the same time and whether the receiver connects to your recording device. If performers need to move away from their seats without a cable running to the table, freedom of movement is my top priority. Around 14% of consumers choose it as their main consideration.

Common buying mistakes

  • Confusing two microphones with two separate recording tracks

    A receiver may combine two transmitters or send them to separate channels. It depends on the routing of the exact set.

    Check the channel mode and create a test file that you can open in your editing software. You may also need a compatible recorder, interface or receiver in your recording chain.

  • Assuming every 3.5 mm plug will fit

    A 3.5 mm connection doesn’t, by itself, tell you whether the wiring is compatible with the input. The RØDE Lavalier GO uses TRS; the Shure MVL uses TRRS.

    Compare the microphone’s full plug specifications with the recording device’s input before choosing.

  • Mistaking a wireless clip-on set for separate lavalier microphones

    The RØDE Wireless Micro Camera Kit has built-in microphones in its clip-on transmitters. According to RØDE, the Wireless PRO comes with two separate lavaliers.

    Choose based on what you want to attach to clothing, and check which components are included with the exact set.

  • Trying to fix clothing noise simply by choosing a different microphone

    Fabric brushing against the capsule or cable movement can be audible, whatever microphone you choose. RØDE highlights positioning and strain relief as things to consider when mounting a lavalier.

    Test the attachment, cable and performers’ movements before recording the full scene.

Brands to consider

RØDE

The range includes separate wired lavaliers and wireless systems for two people.

  • The Lavalier GO has a 3.5 mm TRS connection. According to RØDE, the Wireless PRO comes with two lavaliers and supports split mode.
  • The Wireless Micro Camera Kit has built-in clip-on microphones, so it’s not the same as a set of separate lavaliers. Check the receiver and channel settings for the set you choose.

BOYA

The wired BY-M1 is a clip-on microphone for use with cameras, smartphones and recorders, among other devices.

  • BOYA says the BY-M1 offers a choice of camera and smartphone modes.
  • According to BOYA, the BY-M1 uses an LR44 battery. Don’t confuse it with the BY-M1S, which the manufacturer says doesn’t need a battery.

Deity

The V.Lav is a wired lavalier with a TRRS connection for use with 3.5 mm recording equipment.

  • According to Deity, the V.Lav automatically adapts its TRRS connection to most 3.5 mm microphone inputs.
  • ‘Most’ doesn’t mean every input, so test the connection with your own recording device.

Shure

The MOTIV MVL is a lavalier with a 3.5 mm TRRS plug for use with a compatible portable recording device.

  • The Shure manual lists speech recording as one of its uses.
  • The TRRS connection differs from TRS. Check whether your input is compatible or if you need a suitable adapter.

Sennheiser

Sennheiser positions the MKE 2 (Black EW) for uses including live work, television and theatre.

  • Sennheiser describes the MKE 2 as a small omnidirectional lavalier.
  • Check the full EW variant and its compatibility with the relevant transmitter or input.

Joybuy products for wireless recording

These Joybuy products are wireless microphone and lavalier setups for recording several performers around a table. For each set, check the number of transmitters, the receiver and how it connects to your recording device.

DJI Mic Mini 2S with 2 TX, 1 RX and charging case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The set with two transmitters is designed for recording several performers. Check that the receiver and channel settings support the separate editing you want.

According to the product name, the set includes 2 TX, 1 RX and a charging case.

View at Joybuy
Lark M2 Wireless Lavalier Microphone System

Lark M2 Wireless Lavalier Microphone System

A wireless lavalier setup could suit you if you don’t want microphone cables running to the table. Check how many microphones are included in your chosen set and how the receiver connects.

The product name lists 48 kHz/24-bit, a transmitter weight of 9 g and a transmission range of 300 m.

View at Joybuy
SYNCO P2ST wireless lavalier microphone system with dual mic and USB-C

SYNCO P2ST Wireless Lavalier Microphone USB-C, Dual Mic 2.4GHz with Charging Case

The product name describes a dual-microphone set. Check that the USB-C receiver is compatible with the device you want to record the voices on.

The product name lists USB-C, dual mic, 2.4GHz and a charging case.

View at Joybuy
DJI Mic 3 with 2 TX, 1 RX and charging case

DJI Mic 3 (2 TX + 1 RX + Charging Case)

The set with two transmitters could suit a recording with several performers. Check that the receiver provides the channels you need for editing.

According to the product name, the set includes 2 TX, 1 RX and a charging case.

View at Joybuy

Frequently asked questions

Can one lavalier microphone record each performer at the table separately?

No, one microphone signal won’t automatically give you separately adjustable voices. For performers recording at the same time, use a microphone or transmitter for each person and check how many channels the recorder actually saves. A system with two transmitters may offer a split mode for this; check the settings on the exact set.

How should you position a lavalier for a test recording?

As a general placement guideline, RØDE recommends positioning it on the chest, about 20–30 cm from the mouth. Keep clothing away from the capsule, use strain relief on the cable if needed, and have the actors try the movements they’ll make in the scene.

Will every 3.5 mm lavalier work with my phone or recorder?

No, the 3.5 mm size alone doesn’t confirm that a microphone will work with the input. The RØDE Lavalier GO has a TRS connection, while the Shure MVL uses TRRS. Compare the full connection specifications and check that your recording device uses the external microphone.

Do you always need a licence for a wireless microphone in the Netherlands?

No, not always. The Dutch Authority for Digital Infrastructure describes frequency space that can be used without a licence; some other frequency bands do require one. Check the frequency of the exact set and the conditions that apply.