Who is this relevant to?

Designer uploading large files

You want to find out whether delays when sending files are caused by your internet connection or your Wi-Fi before replacing your router.

Shared work network

Several people use laptops and other devices at the same time. So you’re comparing the Wi-Fi capabilities, wired ports and management features of specific models.

Workstation outside the coverage area

You upload files from a room where distance, walls or another floor may weaken the signal, and are considering adding Wi-Fi access points.

What should you look for when choosing?

Keep your existing router and use a wired connection

When: if you can run a cable to your workstation, or you’re not yet sure whether Wi-Fi is slowing down your upload.

Trade-off: a cable limits where you can place your computer and won’t improve coverage for other wireless users.

One standalone Wi-Fi router

When: if the rooms you need already have coverage, but you want to compare ports or features for multiple users.

Trade-off: a single router location may not solve poor coverage behind walls or on other floors.

Mesh or additional Wi-Fi access points

When: if Wi-Fi is weak where you upload and you can position additional access points in suitable locations.

Trade-off: the access points need to be connected to one another; a wired connection may require you to run cables.

KPN advises treating wired and wireless internet as separate things. So test your connection at your workstation first, then choose a setup that addresses the problem.

Concern What should you check? Who is this for?
Upload speed On the same connection, compare an upload over a cable with one over Wi-Fi, ideally while your usual devices are online. Also check the WAN port on the model you’re considering. When I send large design files, I want to know whether the delay is caused by Wi-Fi or my internet connection. Around 36% of consumers in this situation prioritise upload speed above all else.
Multiple users at once Count the devices in use at the same time and see which ones can be connected by cable. Compare the Wi-Fi standard, ports and any traffic management features on each model. When several people are working online at once, I want to know which devices can use a cable and what features the model offers. Around 29% of consumers focus on use by multiple people at once.
Coverage at your workstation Measure the signal where you upload, and first check whether moving a single router would help. If not, compare how many access points you need, where you can place them and whether Ethernet backhaul is possible. When the signal in my study is weak, I want to know whether additional Wi-Fi access points can improve coverage there and how they connect. Around 21% of consumers prioritise coverage at their workstation.
Network management Check the management options and update policy for the exact model. Also consider how guests will get access and which equipment from your provider you’ll keep. When I share a network with others, I want to know how to manage access and updates. Around 14% of consumers prioritise management and access controls above all else.

Common buying mistakes

  • Mistaking the Wi-Fi speed on the box for your upload speed

    A stated Wi-Fi speed doesn’t tell you how quickly a file will be sent over your internet connection. You need to assess your wired connection, Wi-Fi and internet connection separately.

    Before replacing your router, compare a wired and wireless upload test from your workstation.

  • Buying extra Wi-Fi access points without planning how they’ll connect

    An access point in a room with poor coverage also needs a usable connection to the rest of your network.

    Check where you can position the access points and whether Ethernet backhaul will work with your setup.

    A wired connection between access points may mean running extra cables or choosing a different location.

  • Treating a router, modem and mesh access point as interchangeable devices

    A standalone router may need an existing modem. Connecting directly to your provider’s network may require specific settings and compatibility.

    Before buying, decide which device you’ll keep and what role the new device will have.

    A different connection setup may require extra equipment or time for configuration.

Brands worth considering

TP-Link

The Archer AX55 is a standalone router, while the Deco X50 is a mesh option with multiple Wi-Fi access points.

  • TP-Link lists OFDMA and gigabit ports for the Archer AX55. For the Deco X50, the manufacturer says Ethernet backhaul is optional.
  • These product specifications aren’t upload speed test results. For the Deco, check how many access points are included in the package you choose.

ASUS

The RT-BE58U is a standalone Wi-Fi 7 router whose ports and management features you can compare.

  • ASUS specifies a 2.5G WAN/LAN port, access point mode, guest network and traffic management for this model.
  • Wi-Fi 7 alone doesn’t prove that uploads over your existing internet connection will be faster. Also check which Wi-Fi modes your devices support.

FRITZ!

The FRITZ!Box 4060 is a standalone router that connects to an existing modem and can be expanded as part of the FRITZ! mesh system.

  • FRITZ! lists a 2.5-gigabit WAN port, three gigabit LAN ports and a five-year manufacturer’s warranty for this model.
  • According to FRITZ!, the 4060 doesn’t have a built-in modem. Check that the router is suitable for the type of connection you want to keep.

NETGEAR

The Orbi RBK763S is a tri-band mesh setup with a router and two satellites.

  • NETGEAR lists a dedicated connection between the router and satellites, plus one year of Armor included.
  • Coverage and capacity are NETGEAR claims, not a guarantee of the same performance in every room. Also check what happens to Armor after the included year.

Joybuy products for this situation

The product options below include standalone routers for a single Wi-Fi point and mesh setups for workstations in multiple locations.

ASUS RT-AX52 AX1800 AiMesh router

ASUS RT-AX52 AX1800 AiMesh router

A standalone Wi-Fi 6 router for comparing wired connections and simultaneous wireless use.

Dual-band (2.4 GHz / 5 GHz); the product details list OFDMA, MU-MIMO and three gigabit Ethernet ports.

View at Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A mesh option to consider if you want to use Wi-Fi in multiple locations.

The product title specifies dual-band Wi-Fi 7. Check how many units are included in the version you choose.

View at Joybuy
Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

Huawei eKit OptiX FG630 AX3000 dual-band Wi-Fi 6 mesh router

A mesh option for using Wi-Fi in multiple locations and allowing devices to roam between them.

Dual-band Wi-Fi 6; the product description lists a mesh network with a single network name.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band Wi-Fi router

ASUS RT-AX52 Pro AX3000 dual-band Wi-Fi router

A standalone Wi-Fi 6 router to consider for a workstation where several devices connect at the same time.

Dual-band (2.4 GHz / 5 GHz); the product details list OFDMA, MU-MIMO and four gigabit ports.

View at Joybuy
TP-Link Deco XE75 tri-band mesh Wi-Fi 6E with three nodes

TP-Link Deco XE75 tri-band mesh Wi-Fi 6E with three nodes

A mesh option for workstations in different rooms; the product details specify three nodes.

Tri-band (2.4 GHz / 5 GHz / 6 GHz); the product details list three gigabit ports per unit, OFDMA and MU-MIMO.

View at Joybuy

Frequently asked questions

Can a new Wi-Fi router upload my design file to the internet faster?

Only if your current local connection is the bottleneck. First compare a wired upload with a wireless test; a router won’t automatically increase the speed of your broadband package.

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer confirms that you can choose your own router. Before buying, check your provider’s connection settings and decide which function your existing modem will continue to perform.

Do I need a licence for Wi-Fi at home or in my workplace?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence to use Wi-Fi in homes and business premises, provided you use the designated frequencies and comply with the conditions of use.

What should I do when setting up and maintaining my own router?

Use the correct connection settings from your provider and keep your router up to date. VeiligInternetten recommends installing updates and, where possible, enabling automatic updates.

What else should I compare besides the router itself?

Check whether additional Wi-Fi access points need cabling or a different location, and see which services are included temporarily. FRITZ! lists a five-year manufacturer’s warranty for the 4060; NETGEAR lists one year of Armor included with the Orbi RBK763S. These terms apply to those models.