Fixed-position newsreader
You record bulletins from one spot and want your voice to sound clear, without clothing rustle. So start by considering microphone placement and whether a wired connection is compatible with your recording equipment.
For a fixed speaking position, a wired lapel microphone is often the simplest option, provided the plug and power supply are compatible with your recording input. Choose wireless if you genuinely need to move around during the bulletin, but remember to allow extra time for charging and connection checks. Always make a test recording with your chosen microphone and clothing to check for rustling.
You record bulletins from one spot and want your voice to sound clear, without clothing rustle. So start by considering microphone placement and whether a wired connection is compatible with your recording equipment.
You record a bulletin using a phone or tablet. The microphone connection, any adapter and the recording app all need to work together. For example, Shure describes the MVL as suitable for compatible mobile TRRS connections or a suitable adapter.
You move around while recording and may benefit from a wireless setup. Remember to consider the connection, power supply and frequency requirements that apply to your chosen equipment.
A good fit if: you speak from a fixed position and the input is compatible with the microphone’s plug and power requirements.
Keep in mind: the cable needs to be routed safely, and wired models don’t all have the same connection or power requirements.
A good fit if: you record on the go and have a compatible TRRS input or adapter.
Keep in mind: a TRRS plug won’t necessarily work with a camera or recorder input. Also check that the app uses the external microphone.
A good fit if: you need to move around while presenting or don’t want a cable running to your recording position.
Keep in mind: the transmitter and receiver need charging and connection checks. The Dutch Authority for Digital Infrastructure warns that using licence-exempt frequencies does not guarantee interference-free operation.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Speech and clothing rustle | Check the clip and placement, then record a test sentence while moving normally. RØDE gives placement on the chest, around 20–30 cm from the mouth, as a general guideline. | When I record a bulletin, I want to sound clear without my clothing brushing against the capsule. Around 36% of consumers put clear speech and a rustle-free fit at the top of their list. |
| Connection and power | Check your exact device, TRS or TRRS connection, any plug-in power requirements and whether you need an adapter. Test the complete recording setup. | I want to use my existing recorder, camera or phone without the microphone having the wrong connection. Around 29% of consumers give the recording device’s connection the highest priority. |
| Discreet setup | Consider the capsule size, clip and cable route; test whether the capsule stays clear of your clothing when you move. | If I’m also being filmed, I want the microphone and cable to be as unobtrusive as possible, without adding clothing rustle. Around 21% of consumers prioritise a discreet setup. |
| Freedom of movement | Check what’s included in the set, the receiver output and the charge level. When considering the stated operating time, bear in mind the test conditions it was measured under. | I want to move around during the bulletin without a cable running to the recorder. Around 14% of consumers put freedom of movement first. |
TRS, TRRS, power requirements and recorder inputs vary from model to model. A plug that fits physically may not be electrically compatible.
Compare the microphone specifications with your existing input, then make a test recording.
Fabric rubbing against the capsule can be audible, even when the microphone is out of shot.
Test your clothing and cable route while moving. If a recording doesn’t work out, you may need to allow time to set up again or record another take.
According to the Dutch Authority for Digital Infrastructure, licence-exempt frequencies are shared and interference-free operation is not guaranteed.
Test the connection where you’ll be recording. If you’re using a tunable UHF system, also check which frequencies are available there.
Audio-Technica describes the ATR3350x as a wired lavalier microphone in a newsreader style, for a fixed setup with a compatible stereo input.
The wired Lavalier GO is designed for a compatible TRS input, such as that on a suitable Wireless GO transmitter or recording input.
Shure positions the MVL for recording with a compatible phone or tablet.
Deity describes the wired V.Lav as suitable for devices with a compatible 3.5 mm microphone input.
The Mic Mini is a wireless system with a separate transmitter and receiver, for situations where you don’t want a cable running to your recording position.
This selection includes wired lapel microphones for a fixed position and wireless systems. Check that each model’s connection and receiver are compatible with your recording device.
No image available
A wireless lavalier setup for anyone who doesn’t want a cable running to the recording position. The product description lists a USB-C receiver; check that it’s compatible with your recording device.
No image available
A wired option for a fixed speaking position; the product title mentions smartphone compatibility.
The title lists a 6 m cable and a 3.5 mm connection. Check that it’s compatible with your device.
No image available
A wireless set for recording without a cable running to the speaker. The title lists two transmitters, one receiver and a charging case; check that the receiver is compatible with your recording device.
The product description mentions microphones built into the transmitters.
No image available
A wireless mini microphone for a setup without a cable running to the recording position. The product title lists a Type-C interface; check that it’s compatible with your recording device.
No image available
A wireless option for a cable-free recording setup. The product title lists two microphones and a Type-C interface; check that the connection is compatible with your recording device.
Start by clipping it to your chest, keeping the capsule clear of any clothing that might rub against it. RØDE gives around 20–30 cm from the mouth as a general guideline. Make a test recording in the booth and listen for rustling as you move your head and body normally.
No. A 3.5 mm plug alone doesn’t tell you whether a microphone is compatible. The RØDE Lavalier GO uses TRS and plug-in power, the Shure MVL is designed for a compatible mobile TRRS input or adapter, and the Audio-Technica ATR3350x has a battery-powered dual-mono output for a suitable stereo input. Check your device and test the entire recording setup.
Not always. The Dutch Authority for Digital Infrastructure lists both licence-exempt frequency ranges and bands that require a licence. Frequency availability can vary by location, so check the frequency and operating conditions for your chosen system.
When buying an electrical or radio device, check whether it has the applicable CE marking. According to the Dutch Government, you’re entitled to a product that works properly when you buy as a consumer, and the seller is your point of contact if something is faulty. This is not the same as a fixed two-year statutory warranty period.