Home readers who vary their volume
If you alternate between quiet and loud passages, you can check before recording the whole piece that both sound usable. RØDE also provides guidance on where to position a lapel microphone.
If you mainly read in one place, choose a wired lapel microphone that’s confirmed to work with your recording device. Test it with both quiet and loud passages, and with the clothes you’ll actually wear. If you want to move around the studio, compare a recorder that captures audio locally with a wireless system that’s compatible with your equipment and the permitted frequency bands. Neither option will automatically prevent clothing rustle or room noise.
If you alternate between quiet and loud passages, you can check before recording the whole piece that both sound usable. RØDE also provides guidance on where to position a lapel microphone.
If you want to use equipment you already own, make sure the microphone plug, input and any adapter are compatible. Shure describes the MOTIV MVL as suitable for compatible mobile devices, while RØDE distinguishes between TRRS and TRS connections.
If you stand or walk, weigh up running a cable to a fixed device against recording locally with a recorder or using a wireless connection. Zoom describes a recorder supplied with a lapel microphone; wireless equipment also requires you to consider available frequency bands.
Choose this if: you mainly read in one place and the plug, input and any adapter are compatible.
Bear in mind: the cable limits how far you can move; a 3.5mm plug alone doesn’t guarantee compatibility.
Choose this if: you want to move while reading and can transfer the recording afterwards. The Zoom F2 is an example of a recorder supplied with a lavalier microphone.
Bear in mind: you’ll also need to manage the recorder, batteries and storage; Zoom’s 32-bit float recording won’t prevent clothing or room noise.
Choose this if: you want to send audio directly to another recording device while moving, and the microphone, transmitter and receiver are compatible with one another.
Bear in mind: check what’s included, the plugs and the available frequency bands. The Dutch Authority for Digital Infrastructure states that some frequency bands require a licence.
| Consideration | What to look for when buying | Who is this important for? |
|---|---|---|
| Quiet and loud passages | Make a test recording at both volume levels and listen to check that the audio remains clear. | If I read dramatic passages with big changes in volume, I want to hear in advance how both extremes sound. Around 28% of consumers prioritise clear recordings of both quiet and loud passages. |
| Compatibility with your equipment | Check the exact device, microphone input, any power requirements and the adapter you may need. | If you want to use a phone, camera, transmitter or recorder you already own, a compatible connection is key. Around 28% of consumers give compatibility with their recording device top priority. |
| Clothing rustle and positioning | Test the clip and cable with the clothes you’ll wear and the movements you’ll make while reading. | If I move while reading, I want to stop fabric rubbing against the capsule. Around 22% of consumers prioritise secure, quiet attachment and positioning. |
| Freedom to move | Compare a cable connected to a fixed device with recording locally or sending audio to a receiver. | If you walk around the recording space, you won’t want to be tied to a fixed device unnecessarily. Around 11% of consumers make freedom of movement their top priority. |
| Equipment required | Check what you already own and whether your chosen setup needs extra accessories, batteries or storage. | If I want to put together a complete, working setup, I want to know in advance what it involves. Around 11% of consumers prioritise the equipment needed for the entire recording chain. |
Plugs that look similar aren’t necessarily suitable for the same input. Shure describes the MVL as suitable for compatible mobile TRRS connections; RØDE states that the smartLav+ needs an adapter to connect to the Wireless GO II’s TRS microphone input.
Before buying, check the exact plug against your recording device’s input and power requirements, and find out whether you need an adapter.
You may need a suitable adapter or a different version of the microphone to connect your equipment.
Fabric rubbing against the capsule or cable can be audible in the recording. RØDE recommends keeping the microphone clear of rubbing clothes and gives approximately 20–30 cm from the mouth as a general positioning guideline.
Test the clip, cable and clothing while making the movements you’ll use when reading. If necessary, try a different attachment point or make an extra loop in the cable underneath the clip.
A standalone wired microphone and a recorder supplied with a lavalier microphone aren’t the same kind of setup. The Zoom F2 includes a recorder setup; the BOYA BY-M1 is a wired microphone that needs a recording device.
Make a note of the equipment you already own, then check what else you’ll need for your chosen setup.
Depending on the setup, you may also need to manage a recorder, adapter, batteries or storage.
The Dutch Authority for Digital Infrastructure states that some frequency bands require a licence and that you must use the correct frequency band.
Before use, check the frequency of the specific system and the latest information from the Dutch Authority for Digital Infrastructure for your recording location.
Shure describes the MOTIV MVL as a lavalier microphone for mobile voice recording, including readings.
The smartLav+ is designed for smartphone recording; the separate Lavalier II has a TRS connection for compatible recording and wireless systems.
According to BOYA, the BY-M1 is a wired lapel microphone with a switch for use with cameras and smartphones.
Deity designed the V.Lav for devices with a 3.5mm microphone input.
The Zoom F2 is a portable recorder setup supplied with an LMF-2 lapel microphone, designed for situations where the reader wants to move around.
This selection includes wired lapel microphones and wireless systems. For each model, check that the connection is compatible with your recording device and that your chosen setup gives you enough freedom to move.
No image available
A wireless option for a reading where you want to move around; the product title specifies 48 kHz/24-bit, a 9 g transmitter and a transmission range of 300 m.
No image available
A wireless option for a compatible USB-C device; the product title specifies a USB-C connection.
No image available
A wired option for reading in one place; the product title specifies use with a smartphone, PC, laptop or camera. Check your device’s exact input.
No image available
A wireless option for a reading where you want to move around; the product title specifies USB-C, 2TX+1RX and a range of 150 m.
No image available
A wireless option for a compatible USB-C device; the product title specifies dual microphones, 2.4 GHz and a charging case.
Position the capsule so that clothing doesn’t rub against it. RØDE gives approximately 20–30 cm from the mouth as a general guideline; test the position with the clothes you’ll actually wear while reading both quietly and loudly, and moving around.
No, check the connection on the specific transmitter. RØDE states that the smartLav+ needs a suitable TRRS-to-TRS adapter, such as the SC3, to connect to the Wireless GO II’s TRS microphone input.
Not automatically. According to the Dutch Government, if a product has a fault, the seller must provide a solution; the Netherlands has no fixed statutory warranty period. Check the terms of any paid extra cover and make sure it offers something you don’t already have.
For an applicable distance purchase from a business, the Dutch Government says you generally have 14 days to change your mind. Check the terms of the specific purchase; this rule doesn’t apply to online purchases from a private seller.
Not always. The Dutch Authority for Digital Infrastructure states that a licence is usually not required, but some frequency bands do require one and you must use the correct frequency band. Check the system’s frequency and the latest information for your recording location.