A lamp with a motion sensor can be handy by the front door, on the driveway, in the hallway or in a wardrobe. It only switches on when it detects movement, so you don’t have to keep looking for a switch. However, not every sensor light is suitable for every location.
Many purchases disappoint because the detection range is too short, the light isn’t sufficiently protected against moisture or the power supply isn’t right for the location. Use these checks to help you choose the right motion sensor lighting, outdoor light with a motion sensor or compact indoor sensor light.
A lamp with a high lumen output can light up a large area, but only if the beam is aimed correctly. For a wardrobe or bedside table, 20 to 30 lumens may be enough. For a driveway or garden, a wider spread of light and a longer range are more important.
So look out for:
Most lights use a PIR motion sensor. It responds to changes in infrared heat, for example when someone walks past. Its range depends on the mounting height, viewing angle and direction of movement.
A sensor that detects movement up to 9 metres away won’t necessarily detect it reliably in every situation. Positioning it facing the direction of travel often works differently from detecting movement across its field of view. Also check whether pets, moving branches or passing cars could trigger the light unnecessarily.
A wireless sensor light for the bedroom isn’t necessarily suitable for an exterior wall. For outdoor use, check the IP rating:
Also check whether the light is mains-powered, battery-powered, USB-powered or solar-powered. A solar lamp with a motion sensor needs direct sunlight to recharge its battery properly.
Compare more than just the number of metres: check the viewing angle too. A sensor with a 100-degree angle is suitable for a specific passageway, while a wider angle may be more useful for a driveway or patio. For example, the UME solar light lists a detection distance of 60 feet and a 180-degree angle. How well it works in practice still depends on its mounting height and position.
A mains-powered light is suitable for a permanent location, but installation may require wiring and sometimes an electrician. A solar- or battery-powered model is more flexible. Bear in mind:
According to the eufy Security Motion sensor product description, its battery can last up to two years. This is the usage period stated by the brand and depends on the number of detections and the conditions.
For automatic lighting in a hallway, a gentle light is often more pleasant than a bright outdoor light. For security lighting by a garage or back door, a higher light output may be more useful. Check the colour temperature too: warm white often works better by an entrance or in a bedroom, while neutral white can be practical in a storage room or bathroom.
Why it suits this profile: This compact set is designed for bedrooms, hallways and other indoor spaces where you don’t want to install a permanent fitting.
The product description specifies a range of 3–5 metres, operation at up to 20 lux and five dimming levels. This makes its intended use clearer than a general claim about automatic lighting alone.
500 mAh rechargeable battery, USB charging, three colour temperatures and five brightness settings.
Why it suits this profile: A permanent wall light for an entrance, patio or exterior wall, with no connection to the mains needed.
The IP44 rating makes it clear that this light can withstand splashing water, but isn’t designed for direct water jets. It’s therefore best placed under a canopy.
1000 lumens, warm white light at 3000 K, two lighting modes and an integrated motion sensor.
Why it suits this profile: Designed for a garden, driveway, garage or spacious patio where wide light coverage and solar power are desirable.
The product information lists an IP65 rating, three adjustable heads and three lighting modes. However, check that your chosen mounting spot gets enough direct sunlight.
302 LEDs, stated light output of 3000 lumens, 270-degree coverage and installation without mains wiring.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the applicable European safety regulations.
Point the sensor towards the area where people actually walk past. Avoid direct heat sources, bright sunlight shining on the sensor and moving branches. For outdoor lighting, also check the IP rating and make sure the wall or mounting plate is sturdy enough.
Lifespan depends on the type. An integrated LED usually doesn’t have a replaceable light source; with a battery- or solar-powered light, the battery is the main factor affecting how long it lasts. So check whether the battery is replaceable, how the light is charged and what lifespan the manufacturer states.
A light that only comes on when it detects movement uses less energy than one that stays on continuously. Actual consumption depends on the wattage, the number of times it switches on and how long it stays on. With a solar lamp with a motion sensor, the energy comes from the battery, but performance still depends on getting enough daylight.