Who is this buying guide for?

Volunteer organising folder spines

You want to be able to read dates on existing folders at a glance, with labels that fit the available spine width. Measure a folder before choosing the tape and text layout. Kieskeurig.nl also points out that the printer must support the label width you need.

Coordinator of shared resources

You want a process that different volunteers can follow consistently. Decide whether printing from a built-in keyboard is important, or whether a shared phone or tablet is available. Brother Netherlands and DYMO’s model information describes both ways of operating a label maker.

Manager of a long-term archive

You’re considering the tape and where the folders will be stored, so labels remain useful throughout the storage period. DYMO warns that prolonged exposure to sunlight or fluorescent light can discolour or fade LetraTag labels.

What should you look for when buying?

Start with the folder spine and how easy you need the label to be to read. Then choose how you’ll operate the label maker, and check the tape and power requirements for the exact model.

Label maker with a built-in keyboard

A good fit if: volunteers need to enter dates on the spot without a phone or computer.

Bear in mind: the Brother PT-D210VP supports tape up to 12 mm wide, which may not be enough for every folder spine or text layout.

Label maker with a phone app

A good fit if: the community centre has a compatible phone or tablet available for printing.

Bear in mind: operation depends on the app and device. DYMO also specifies that four AA batteries are required for the LetraTag 200B and are not included.

App- or computer-connected label maker for wider folders

A good fit if: the folder spine and desired layout call for tape wider than 12 mm.

Bear in mind: Brother specifies a maximum width of 24 mm for the PT-P710BT. You won’t need that extra width if a narrower test label is already easy to read.

What to consider What to check before buying Who is this important for?
Readable date on the folder spine Measure the spine and print a test label using your preferred text layout. Check the maximum width supported by both the printer and the cassette. If I want to read dates from the cupboard, the label needs to fit and be clear. Around 33% of consumers say readability on the folder spine is their top priority.
Operation by different volunteers Agree who will make the labels and decide whether you need to print without using a shared phone. If different volunteers are making the year labels, I want them to be able to follow the same simple process. Around 27% of consumers prioritise shared use.
Keeping labels identifiable throughout storage Check which tape material is compatible with the exact model, and consider where the folders will be kept. If folders are being kept for a long time, I want to consider the tape and exposure to light. Around 20% of consumers give long-term legibility their top priority.
Consumables and power Check the cassette range, supported width and included power supply. Also look at which tape you’ll need for future years. If new labels are needed every year, I want to be able to get compatible replacement tapes and the required power supply. Around 20% of consumers prioritise ongoing running costs.

Buying pitfalls

  • Assuming the maximum tape width will fit every folder

    A printer that can handle wide tape won’t help if the folder spine is too narrow for it. A narrower model, on the other hand, may not leave enough room for the layout you want.

    Measure a folder you already use and print a test label before buying several cassettes.

  • Assuming different label tapes are interchangeable

    Brother TZe and DYMO LetraTag tapes belong to different cassette ranges. The tape must be compatible with your printer.

    Check the full printer model, cassette range and supported width together.

  • Choosing an app-based model without agreeing how it will be used

    The DYMO LetraTag 200B works through an app, while the Brother PT-D210VP has its own keyboard. An app-based model therefore requires access to a compatible mobile device.

    Before buying, decide who will make new year labels and which device they’ll use.

  • Treating an older model listing as proof of current availability

    Epson Netherlands lists the LabelWorks LW-K400 reviewed here as discontinued and no longer available.

    Don’t use information about this model as proof that a possible successor is available or has the same features.

Relevant brands

Brother

The P-touch range offers both a model with a built-in keyboard and models operated via an app or computer.

  • Brother Netherlands specifies labels up to 12 mm for the PT-D210VP and up to 24 mm for the PT-P710BT.
  • Brother lists TZe tapes in various widths and finishes.
  • Check which tape fits each printer model. The maximum width supported by one model doesn’t automatically apply to another.

DYMO

The LetraTag 200B is an app-based model for 12 mm LetraTag tapes. DYMO lists folders and binders as suitable uses.

  • According to DYMO, the printer works via the LetraTag Connect app on a phone or tablet.
  • DYMO specifies that four AA batteries are required and not included.
  • According to DYMO, prolonged exposure to sunlight or fluorescent light can discolour or fade LetraTag labels.

Epson

LabelWorks is a tape-label option worth comparing if you’re considering a different cassette width.

  • Epson Netherlands lists tape widths of 6, 9, 12 and 18 mm for the LW-K400.
  • Epson Netherlands marks the LW-K400 reviewed here as discontinued and no longer available. Don’t treat this model information as proof that it’s currently a suitable new purchase.

Label makers at Joybuy

This selection includes label makers for folders, operated via a mobile device or using a built-in keyboard. Check that the label width, tape and operating method suit the folders and volunteers at your community centre.

Phomemo M110 portable label maker

Phomemo M110 Portable Label Maker

A good fit if you want to make folder labels from a mobile device and are looking for a portable label maker.

The product name specifies one label roll.

View at Joybuy
DYMO LetraTag 200B Bluetooth label maker

DYMO LetraTag 200B Bluetooth Label Maker

A good fit if a phone or tablet is available for app-based operation and 12 mm tape suits the folder spine.

DYMO specifies the LetraTag Connect app and 12 mm LetraTag tapes. Four AA batteries are required for use and are not included. DYMO warns that prolonged exposure to sunlight or fluorescent light can discolour or fade labels.

View at Joybuy
Brother PT-P300BT Bluetooth label printer

Brother PT-P300BT Label Printer

A good fit if you want to print folder labels from a smartphone or tablet and need tape up to 12 mm wide.

The product name specifies Bluetooth, direct thermal printing, 180 × 180 DPI and a print speed of 20 mm/sec. The tapes listed are TZe formats.

View at Joybuy
Brother QL-800 label printer

Brother QL-800 Label Printer

A good fit for a permanent workstation where labels are made using a wired printer. Check that the connection is compatible with the computer available.

The product name specifies direct thermal printing, DK tape, a wired connection, 300 × 600 DPI and 148 mm/sec. The product description also mentions black-and-red printing.

View at Joybuy
Brother PTH110 handheld label maker, Italian version

Brother PTH110 Handheld Labelling Machine, Italian Version

A good fit for volunteers who want to enter labels without a phone. The product information specifies a QWERTY keyboard and an LCD screen. Check that the Italian version has the keyboard layout you need.

The TZe tape widths listed are 3,5, 6, 9 and 12 mm. The product information specifies AAA battery operation.

View at Joybuy

Frequently asked questions

How can you avoid labelling all your folders incorrectly?

First, measure the spine of one folder you already use and print a test label with the date. Then check that both the cassette and the printer support the width you need. Brother Netherlands specifies a maximum of 12 mm for the PT-D210VP and 24 mm for the PT-P710BT.

What do you need to use the DYMO LetraTag 200B?

According to DYMO, this model prints via the LetraTag Connect app on a compatible phone or tablet and uses 12 mm LetraTag tapes. DYMO specifies that four AA batteries are required and not included. Before use, check that the app and device you need are available.

How can you keep labels legible on folders stored for a long time?

Check which tape material is compatible with the model and where the folders will be kept. DYMO warns that prolonged exposure to sunlight or fluorescent light can discolour or fade LetraTag labels. If needed, test a label on the folder material you use first.

What warranty applies if the community centre buys the label maker?

First establish whether the buyer is an individual or the organisation. The Dutch government’s information about European consumer rights explicitly applies to purchases made by individuals. Don’t assume that the same protection automatically applies to a purchase made by an organisation. For a business purchase, make sure you have the seller’s terms and conditions in writing.

Where can you take used batteries and a discarded label maker?

According to the Dutch government, household batteries must not go in general waste and can be taken to collection points, such as shops that sell batteries. Electrical equipment can be taken to a local authority collection point, among other places. The free take-back scheme offered by shops when you buy a replacement applies to equipment owned by individuals, not businesses.