Who is this useful for?

Shop selling small batteries

If you want to put short codes on different camera batteries, first measure the available space and check that the label will fit and remain legible. Brother and DYMO offer label makers with different tape widths, but the width alone doesn’t guarantee that a label will fit every battery casing.

Team that reprints codes

If you regularly use the same shop codes, decide whether typing on the device is enough or whether designing labels on a phone or reprinting saved designs would suit your workflow better. Brother states that the PT-D610BTVP can store 99 label designs.

What should you look for when buying?

First measure the space on the battery, then choose the cassette and operating method. Also check how to place the label safely on the casing.

What to consider What should you check? Who is this important for?
Fit and legibility Measure the available space on the battery and compare it with the supported tape width. If possible, print a test label using a code you actually use. If I want to put short codes on a small area, the tape needs to fit and the code must remain legible. Around 39% of consumers prioritise fit and legibility on the battery.
Creating and reprinting codes Decide whether you want to type without using a phone and whether you want to save or reprint designs. If I often need the same shop codes, I want to be able to create or reuse them quickly. Around 23% of consumers give efficient code reprinting top priority.
Legibility in use Check which type of tape the device uses and test a label on a suitable, clean area away from the contacts. If batteries are handled regularly, I want the code to remain legible in the conditions I use them in. Around 23% of consumers put material and legibility first.
Device and refills Check which cassette is compatible with the exact model and what is included with the version you’re considering. If I want to make labels regularly without buying more than I need, I compare the device with the refills I’ll need. Around 15% of consumers focus mainly on the total purchase cost and ongoing use.

Common buying mistakes

  • Choosing a cassette based on width alone

    TZe, D1 and LT cassettes are designed for different device ranges. Even a cassette with the right stated width may not fit the available space on your battery.

    Note down the exact device model, measure the battery, then check that the cassette is compatible with that label maker.

    An incompatible cassette could mean choosing another tape and making your labels again.

  • Confusing an internal code with a shipping mark

    Transport may be subject to separate packaging and marking requirements. The rules depend, among other things, on the battery and the method of transport.

    Use a label maker for internal identification, and check any shipment separately against the applicable transport regulations.

  • Assuming an older model is still available

    Epson Netherlands lists the LabelWorks LW-K400VP and LW-Z710 models covered here as discontinued. Their previous specifications don’t confirm that they’re currently available.

    Check the status of the exact model and its compatible tape before choosing.

    This helps you avoid spending time looking for a discontinued device or compatible accessories.

Brands to compare

Brother

The P-touch range includes standalone models as well as label makers with extra design and reprinting features. The right choice depends on the tape and workflow you’re looking for.

  • Brother states that the PT-H110 supports labels up to 12 mm wide. According to Brother, the PT-D610BTVP supports TZe widths from 3,5 to 24 mm.
  • The stated tape width doesn’t prove that the tape will fit or adhere well to every camera battery.

DYMO

LabelManager and LetraTag models use different tapes and offer different ways to create labels: D1 for the LabelManager 160 and LT for the LetraTag 200B.

  • DYMO lists D1 widths of 6, 9 and 12 mm for the LabelManager 160. The LetraTag 200B uses 12 mm LT cassettes and can be operated via a mobile app.
  • The 12 mm LT tape may be too wide for the space available on a small battery, so measure it before choosing a cassette.

Epson LabelWorks

Compare Epson models by checking the specifications for a particular model and the tape listed for it.

  • Epson Netherlands lists 12 mm LK-4WBJ tape for the LW-C410 and LW-C610.
  • Epson Netherlands lists the LW-K400VP and LW-Z710 models covered here as discontinued, so don’t base your choice on their previous availability.

Joybuy products

This selection includes portable label makers and models for designing labels on a phone or computer. Check the compatible tape range for each model and make sure the label width will fit your battery.

DYMO LetraTag 200B Bluetooth Label Maker

DYMO LetraTag 200B Bluetooth Label Maker

Ideal for designing codes in the LetraTag app on a phone or tablet.

Uses 12 mm LetraTag LT cassettes. Check that this width fits the available space on the battery.

View product at Joybuy
Brother PT-P300BT label printer

Brother PT-P300BT

Ideal for designing codes via Bluetooth. Before buying, check which cassette is compatible with this model.

The product name specifies thermal printing, 180 × 180 DPI, 20 mm/sec, TZe and Bluetooth.

View product at Joybuy
Brother QL-700 label printer

Brother QL-700

Ideal for repeatedly printing codes from a computer. Check that the label type you use is suitable for the size of your battery.

The product name specifies direct thermal printing, 300 × 300 DPI, 150 mm/sec and DK labels.

View product at Joybuy
Brother PT-D610BTVP label printer

Brother PT-D610BTVP

Ideal for recurring codes you want to print again. Brother states that it can store 99 label designs.

Supports TZe tapes from 3,5 to 24 mm. The product name specifies thermal transfer printing, 180 × 360 DPI, 30 mm/s and wired and wireless connectivity.

View product at Joybuy
Brother PT-H110 handheld label maker, Italian version

Brother PT-H110 handheld label maker, Italian version

Ideal for creating individual codes on the spot with a portable label maker.

For this version, check the exact cassette compatibility and measure the available label area on the battery.

View product at Joybuy

Frequently asked questions

Can I put a label over the metal contacts on a camera battery?

Keep identification labels away from the electrical contacts and place them on a suitable part of the casing. The Fire Service identifies short circuits and damage as fire risks. Stichting OPEN advises covering exposed terminals on battery packs when they are collected for recycling; this guidance doesn’t mean you should use an identification sticker to insulate contacts.

Do all label cassettes fit every label maker?

No. Check which tape range is compatible with the exact model. Brother specifies TZe for P-touch, while DYMO specifies D1 for the LabelManager 160 and LT for the LetraTag 200B. Also measure the available space on the battery.

How should I maintain a label maker if print quality gets worse?

Follow the instructions for your chosen model. DYMO advises keeping LetraTag devices free from dust, adhesive residue and tape obstructions. For another model, check its manual for the relevant maintenance instructions.

What should I compare when choosing a label maker?

Check which cassette is compatible with the exact model, what comes with the version you’re buying and which refills you’ll need. Brother lists a cassette, adapter and carry case with the PT-D610BTVP; check the contents of other versions separately.

Is a shop label also suitable as a mark for shipping a lithium battery?

You can’t tell from an internal identification label. According to the Human Environment and Transport Inspectorate, transport requirements depend on the type of battery and the method of transport; applicable packaging and marking rules apply to road, sea and air transport. The requirements for a shipment depend on the battery and the specific route.