Manager of a small camera battery collection
Wants to give each battery a legible code, so first checks the clear surface against the tape width. Brother and DYMO list the tape options available for their models.
First, measure the clear area on the battery and choose a label maker with a suitable tape width, keeping the electrical contacts clear. A model with a keyboard is handy for entering codes at the workbench, while a phone-operated model may suit you if you want to prepare labels on a mobile device. Compare the specific tape and power supply requirements too, as these vary by model.
Wants to give each battery a legible code, so first checks the clear surface against the tape width. Brother and DYMO list the tape options available for their models.
Wants codes to stay legible when batteries are handled frequently, and compares the stated properties of specific tape types. Brother and DYMO describe the durability of certain tapes.
Creates new or recurring codes regularly and chooses between entering them on the device or preparing them on a phone or tablet. Brother describes both control methods for different P-touch models.
Start with the clear area on the battery, then choose the tape, controls and supplies to suit how it will be used.
| What to consider | What to check when buying | Who is this most important for? |
|---|---|---|
| Fit on the battery | Measure the clear area and compare it with the width of a suitable cassette. Keep the electrical contacts clear. | If I want to put a code directly on a small battery, the tape needs to fit on the clear area without covering the contacts. Around 36% of consumers prioritise fit above all else. |
| Legibility in the workshop | Compare the exact type of tape and its stated durability with the conditions in which the batteries will be used. | For batteries that are handled frequently, I want the code to stay legible in workshop conditions. Around 29% of consumers prioritise legibility. |
| Entering and reusing codes | Decide whether codes will be entered on the spot or prepared on a mobile device. Check which control method the model offers. | If we create different or recurring codes regularly, I want a process that works well at the workbench. Around 21% of consumers prioritise how codes are entered and reused. |
| Reordering tape and power supplies | Check the cassette family, preferred width and included power supply before choosing a model. | For a shared stock, I want to know which cassettes and power supplies we’ll need later. Around 14% of consumers consider reordering and consumables decisive factors. |
The manufacturer lists labels measuring 20–50 mm wide for the Phomemo M110. These widths may be too large for the clear area on a small camera battery.
First, measure the surface where you want to place the label. Consider wider labels only if you have enough room, for example on a battery case.
DYMO says that prolonged exposure to direct or fluorescent light can cause text on labels to fade. Durability claims also apply to specific tape types.
Compare the exact type of tape or label with the conditions in which the batteries will be used. Don’t rely on the word ‘thermal’ alone.
If a code becomes illegible in the conditions it is used in, you may need to relabel it.
The models reviewed use different tape systems: Brother P-touch models use TZe tape, while the DYMO LabelManager 160 uses D1 cassettes. For the PT-P300BT, Brother lists an adapter that is not included.
Before buying, check the full model name, cassette family, preferred width and included power supply.
To keep using the device, you’ll need to be able to reorder compatible cassettes; for the PT-P300BT, you’ll also need to check the power supply.
The PT-H110 has a built-in keyboard for entering codes, while the PT-P300BT connects to a smartphone or tablet via Bluetooth, according to Brother. Both use TZe cassettes.
The LabelManager 160 uses D1 cassettes measuring 6, 9 or 12 mm, according to the DYMO manual.
The M110 is a phone-operated thermal label printer that supports labels measuring 20–50 mm wide, according to Phomemo.
Measure the clear area on the battery and compare it with a cassette width supported by your chosen device. Brother lists options including 6 and 9 mm for the PT-H110; the DYMO manual lists D1 cassettes measuring 6, 9 and 12 mm for the LabelManager 160. A suitable width doesn’t prove that the tape will stick to every battery surface.
No. Keep the electrical contacts clear and put an identification label only on another suitable surface. The Fire Service warns of the risk of fire from a short circuit; also follow the manufacturer’s instructions for storing the battery.
Check the full model name, cassette family and preferred width. The Brother P-touch models reviewed use TZe tape; the DYMO LabelManager 160 uses D1 cassettes. Don’t assume these systems are interchangeable.
According to the Government of the Netherlands, you can take batteries from still and video cameras to battery collection points, including shops and supermarkets that sell batteries, as well as your local council recycling centre. This is about disposing of batteries and does not establish a labelling requirement for a shared workshop.