Who is this guide for?

Maker with a fixed tripod setup

You photograph several small pieces of jewellery from the same position and want to avoid touching the camera when taking a shot. Check that the connection or control method is compatible with your camera model; Canon, for example, describes control via a suitable app and wired releases for specific connections.

Maker who moves around the worktable

You arrange jewellery or adjust the lighting while the camera stays in place. A supported app or wireless release can help you avoid running a cable across a shared work surface; Nikon and Sony list wireless options that vary by model.

Maker who checks details from a distance

You want to do more than take a shot from your workstation: you also want to check what controls your camera app or remote offers. Check the features available for your camera model; Nikon highlights reflections as a separate consideration when photographing jewellery.

What should you look for?

Start by checking compatibility with your camera model, then choose a control method that suits where you work at the shared table.

What to consider What should you check? Who is this important for?
Compatibility Check your full camera model against the manufacturer’s list, and confirm the connection, Bluetooth support and any adapter requirements. For example, Fujifilm specifies a 2.5 mm to 3.5 mm adapter for the RR-100 with the X-S10 and X-T200. If I want to be sure the release will work with my camera, I check the exact connection and whether an adapter is needed. Around 36% of consumers prioritise compatibility.
Fixed setup Check that the cable is long enough and won’t get in the way of your work or walking route. Canon lists a 60 cm cable for the RS-60E3 and an 80 cm cable for the RS-80N3; each has its own type of connection. If I take repeated shots from the same tripod, I want to release the shutter without touching the camera and disturbing the composition. Around 29% of consumers prioritise a fixed setup.
Going wireless Check that your camera supports the specific wireless release and find out how to pair it. Sony gives an estimated range of around 5 metres for the RMT-P1BT; this can vary depending on local conditions. If I move around the shared table while arranging the jewellery or adjusting the lighting, I don’t want a shutter cable across the work surface. Around 21% of consumers prioritise freedom of movement.
Controls and buying Try the self-timer first and check which features an app offers for your camera model. Canon describes Camera Connect as an option for many Canon cameras; available features depend on the camera. If I only want to take a shot remotely, I want to know whether the controls I already have will do the job. Around 14% of consumers first weigh up those controls and whether they need to buy anything extra.

Common buying mistakes

  • Choosing a release based on the brand name alone

    A connection from the same brand won’t necessarily work with every camera model. Canon, for example, distinguishes between E3 and N3 connections; Fujifilm specifies an adapter for certain RR-100 combinations.

    Before buying, check your full camera model against the manufacturer’s list, including any footnotes about adapters.

  • Not considering where the cable will go

    Cable length partly determines where you can stand next to a fixed camera setup. On a shared worktable, the cable could also get in the way of your work or walking route.

    Measure the distance to the tripod and consider how to keep the cable safely out of the shared workspace. If needed, compare it with a supported wireless option.

  • Expecting the release to improve your images

    A shutter release lets you control the camera without touching it, but it won’t automatically solve problems with exposure, reflections or focus. Nikon highlights reflections and small details as separate considerations when photographing jewellery.

    As well as the shutter release, take a look at your lighting setup and focus.

Brands to consider

Canon

Worth considering if you use a Canon camera and are comparing app, cable and Bluetooth controls.

  • Canon lists the RS-60E3 with an E3 connection and 60 cm cable, and the RS-80N3 with an N3 connection and 80 cm cable.
  • Connections and compatibility vary by camera model, so check which option works with your camera.

Nikon

Worth considering if you use a Nikon camera and are weighing up a cable, self-timer, app or Bluetooth release.

  • Nikon lists the MC-DC2 for certain cameras and the ML-L7 for specific models, among other options.
  • The right control method depends on your camera model, so check the compatibility information before choosing.

Sony

Worth considering if you use a Sony camera and are looking at the wired RM-VPR1 or Bluetooth RMT-P1BT release.

  • Sony specifies an 800 mm cable and a multi-terminal connection for the RM-VPR1. According to Sony, the RMT-P1BT works via the built-in Bluetooth receiver in a compatible camera.
  • Sony gives an estimated range of around 5 metres for the RMT-P1BT, which can vary depending on local conditions. Check that your camera is compatible too.

Fujifilm

Worth considering if you use an X or GFX camera and want to compare the RR-100 with other supported ways to release the shutter.

  • Fujifilm publishes a list of compatible models for the RR-100 and specifies an included L-shaped extension cable for a 2.5 mm connection.
  • For the X-S10 and X-T200, among other models, Fujifilm specifies a separate 2.5 mm to 3.5 mm adapter. Check the footnote for your camera model.

Joybuy product selection

This selection includes a Bluetooth remote control for Osmo cameras. It is only relevant if you use one of the Osmo models listed for jewellery photography.

Osmo Action GPS Bluetooth Remote Controller for Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6

Osmo Action GPS Bluetooth Remote Controller

A Bluetooth remote control for use with the Osmo models listed in the product name.

The product name lists compatibility with Osmo Action 4, Osmo Action 5 Pro, Osmo 360 and Osmo Action 6. Check that your camera model is on this list.

View at Joybuy

Frequently asked questions

Do I always need a separate camera shutter release for jewellery photography?

No. For a fixed setup, try the self-timer first. Also check whether your camera model can take shots remotely using a compatible app. A separate release is worth considering if you need to operate the camera from a different position or the controls you already have aren’t enough.

How can I connect a wired release without getting in the way of my setup?

First, check your exact camera model against the supported connection and any adapter requirements. Route the cable so it doesn’t pull on the tripod or run across the shared workspace, and check that it’s long enough to reach where you work.

What should I check if a Bluetooth release isn’t responding?

First, check that it’s compatible with your camera model and follow the pairing steps for that camera. Sony gives an estimated range of around 5 metres for the RMT-P1BT, not a guaranteed range; local conditions can make a difference.

Will a camera shutter release get rid of distracting reflections on jewellery?

No. At most, a release stops you touching the camera when taking a shot. Nikon highlights reflections and exposure as separate considerations when photographing small, shiny pieces of jewellery.