Jewellery maker with an existing mirrorless camera
You’re looking for a lens that fits your camera first, then working out how much magnification you need for your product photos.
First, choose a lens with the right mount for your camera, then decide whether you mainly want to photograph complete pieces of jewellery or tiny details. A shorter 1:1 macro lens can suit a range of subjects, but leaves little room for lighting when you’re working close up. With a 90–105mm lens, the available working space depends on the specific model. Magnification beyond 1:1 is mainly useful for very small details; it won’t take the place of controlling reflections or, where needed, focus stacking.
You’re looking for a lens that fits your camera first, then working out how much magnification you need for your product photos.
You photograph shiny jewellery on a table and want enough room to control the lighting and reflections.
You want to capture settings, textures or small components in close-up, and also need to decide how to get enough depth of field.
Choose this if: you want to photograph complete pieces of jewellery and other subjects with a compatible camera. The Nikon Z MC 50mm f/2.8 is one example for a Nikon Z camera.
Bear in mind: according to Nikon, the front of the Nikon 50mm can be just a few centimetres from the subject, leaving less room for lighting.
Choose this if: you have a compatible mount and how the setup works with the specific lens is important to you. Sony lists a working distance of around 13 cm for the FE 90mm.
Bear in mind: the minimum focusing distance and the free space in front of the lens are different measurements; check them for each model.
Choose this if: you want to fill the frame with very small details. Canon specifies up to 1.4× magnification for the RF 100mm F2.8L; Laowa lists up to 2:1 for the 100mm f/2.8 2x Ultra Macro APO.
Bear in mind: check the mount and controls for the Laowa. According to the manufacturer, versions other than Canon EF are manual, with aperture controlled on the lens.
| What to consider | What should you check? | Who should pay particular attention? |
|---|---|---|
| Camera mount | Make a note of your camera model and mount, then check the lens’s full variant name before ordering. | I want to be sure the lens fits my existing camera before comparing magnification. Around 33% of consumers put compatibility first when buying. |
| Working space and reflections | Compare the working distance at the magnification you want, and allow room for a diffuser and light source. | When photographing shiny rings, I want to position the light without making the setup unnecessarily cramped. Around 27% of consumers prioritise working space and lighting setup. |
| Magnification | Decide which smallest detail needs to fill the frame, then compare the maximum magnification of the exact variant. | If I want to show a small setting in close-up, the magnification needs to suit that detail. Around 20% of consumers prioritise magnifying tiny components. |
| Sharpness through the depth of the subject | Decide whether one shot will do, or whether you can take a series of images with different focus points and combine them. | For a three-dimensional piece of jewellery, I want more than just the front to be in focus. Around 20% of consumers prioritise sharpness through the depth of the subject. |
The percentages shown describe how consumers divide their first buying priority in this jewellery photography scenario. Manufacturer information supports the product specifications, not these percentages.
These are different measurements. Sony lists a minimum focusing distance of 28 cm and a working distance of around 13 cm for the FE 90mm.
Where the manufacturer provides it, compare the working distance of the exact lens at the magnification you plan to use.
A photo of a complete piece of jewellery needs different framing from a close-up of a small setting. More magnification won’t solve problems with reflections or limited depth of field.
First, frame an example of a complete piece of jewellery and the smallest detail you want to capture. Then compare 1:1, 1.4× or 2:1.
The Sigma 105mm is available in separate Sony E and L-Mount versions. Laowa lists different controls for the Canon EF version and other mounts.
Check the full model and mount designation, and make sure you’re happy with the controls on the version you choose.
According to Ondernemersplein, sales to a business are not covered by standard consumer law; business buyers do not have a statutory consumer cooling-off period.
Before ordering, decide whether you’re buying as a consumer or a business, and check the applicable contract and warranty terms.
The FE 90mm F2.8 Macro G OSS is designed for compatible Sony E cameras.
The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are 1:1 macro options for compatible Nikon Z cameras.
The RF 100mm F2.8L Macro IS USM is an option for a compatible Canon RF camera if magnification above 1:1 is important to you.
The 105mm F2.8 DG DN MACRO | Art is available in separate Sony E and L-Mount versions.
The 100mm f/2.8 2x Ultra Macro APO is designed for photographers who want to use magnification of up to 2:1.
No. Maximum magnification varies by model. The lenses mentioned have specifications of 1:1, 1.4× or 2:1. Also check that the version you choose fits your camera.
Start by directing and diffusing the light, and pay attention to what’s reflected in the jewellery. In a practical example, Nikon explains how a light tent softens and diffuses light. For each piece, check whether the setup preserves the shine you want.
For a stationary piece of jewellery, you can take several shots with successive focus points and combine them. Nikon describes focus stacking as a way to extend sharpness through more of the depth in macro photography. Check your camera and post-processing options first.
Not necessarily: according to Ondernemersplein, business buyers do not have a statutory consumer cooling-off period. For a consumer buying at a distance, the cooling-off period is usually 14 days, according to the Dutch government. The Dutch government also states that there is no fixed statutory warranty period for faulty products. For business purchases, check the contract and warranty terms.