Who is this guide for?

Jewellery maker with an existing camera

You’re looking for a lens that fits your camera and can capture both an entire piece of jewellery and its finer details. Canon, Nikon, Sony, Sigma and OM SYSTEM offer different mounts and versions, so check the exact variant.

Maker with a cramped, shared photography space

You have to set up the lighting from scratch each time and need space between the lens and a shiny piece of jewellery. Sony and Nikon provide working-distance information for specific macro lenses, which you can compare with the space available for your lights.

Maker of fine engravings

You want to capture tiny features clearly, so you’re looking at magnification and how much of the jewellery stays in focus. Canon and Laowa specify magnifications above 1:1 for certain lenses; at high magnification, depth of field needs extra consideration.

What should you consider when choosing?

Start with your camera’s mount, then decide on the framing you need and whether you have enough room around the jewellery for your lighting.

What to consider What to look for when buying Who is this important for?
Mount and version Check the mount and full model name. If there are different variants, make sure the version is compatible with your camera system. I want to check first that the lens fits my existing camera, so I don’t choose the wrong version. Around 31% of consumers make camera compatibility their top priority.
Room for lighting Compare the working distance for the framing you’ll use, and check whether your lights will fit around the jewellery. In a shared photography space, I want to be able to position my lights around a shiny piece of jewellery. Around 25% of consumers consider room for lighting the most important factor.
Magnification Decide how small a detail you want to show clearly, then compare the maximum magnification of the exact version. If I mainly want to show a fine engraving or setting, I’m looking for framing that makes the detail large enough in the image. This is the top priority for around 25% of consumers.
Repeatable shots Consider whether your camera and workflow allow you to take a stable series of shots with different focus points, and whether you can recreate the setup. For a consistent series, I want to be able to set up the camera, focus and lighting in the same way every time. Around 19% of consumers make repeatable, sharp shots their top priority.

Common pitfalls

  • Confusing minimum focusing distance with the space in front of the lens

    Minimum focusing distance is measured from the subject to the sensor plane; working distance is measured to the front of the lens. A short working distance can leave little room to position lights around the jewellery.

    Compare the working distance for the framing you want to use, and use your available space to work out the scale of the jewellery and lighting setup before you buy.

    If the setup doesn’t fit, you may need to rearrange your space or spend extra time setting it up.

  • Assuming every macro lens offers the same magnification

    The word ‘macro’ alone doesn’t tell you a model’s maximum magnification. Manufacturers specify different magnifications for different lenses, such as 1:1, 1.4× or 2:1.

    Check the maximum magnification of the exact version, and first decide whether you want to photograph an entire piece of jewellery or a tiny detail.

  • Choosing greater magnification to solve reflections or blur

    Reflective jewellery needs careful lighting, and at high magnification only a small part of the subject may be in focus. Switching to another lens won’t automatically solve either issue.

    Try diffused light and a stable setup. If you need greater depth of field, focus stacking may be an option. This involves combining shots taken with different focus points.

    Taking a stable series of shots and processing several images can take extra time.

Brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is an option for a compatible RF camera if you’re looking for magnification greater than 1:1.

  • Canon specifies a maximum magnification of 1.4× and a minimum focusing distance of 0.26 m.
  • The focusing distance isn’t the same as the clear space in front of the lens; also check that the RF mount is compatible with your camera.

Nikon

For Nikon Z cameras, the Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are separate 1:1 macro options.

  • Nikon states that there’s approximately 5 cm between the front of the Z MC 50mm f/2.8 and the subject at the closest focusing distance.
  • This distance applies to the 50mm lens in that focusing situation. Don’t infer an exact working distance for the 105mm from its focal length.

Sony

The FE 90 mm F2.8 Macro G OSS, model SEL90M28G, is a 1:1 lens with an E-mount.

  • For this model, Sony states a working distance of approximately 13 cm at its minimum focusing distance of 28 cm.
  • This working distance applies to this specific model and focusing situation; it doesn’t automatically apply to other Sony macro lenses.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in separate Sony E-mount and L-Mount versions.

  • Sigma specifies 1:1 magnification and a minimum focusing distance of 29,5 cm for this model.
  • Check which mount is available. The minimum focusing distance doesn’t directly indicate how much space is left in front of the lens.

Laowa

According to Laowa, the 90mm f/2.8 2x Ultra Macro APO is designed for highly magnified shots of small details.

  • Laowa specifies 2:1 magnification and a minimum focusing distance of 20,5 cm for this lens.
  • Check the mount and controls on the exact version. The minimum focusing distance isn’t the same as the working distance.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is a 1:1 option for a compatible Micro Four Thirds system.

  • OM SYSTEM states a weight of 185 g and a minimum focusing distance of 0.19 m.
  • The stated 2× 35mm-equivalent magnification isn’t the same as a physical magnification ratio of 2:1; OM SYSTEM specifies 1:1 for this lens.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is the minimum focusing distance the same as the space you need for your lights?

No. Minimum focusing distance is measured from the subject to the sensor plane; working distance is measured to the front of the lens. For the SEL90M28G, Sony gives these distances as 28 cm and approximately 13 cm respectively. Check the space available for the framing you want to use.

How can you minimise reflections on metal and stones?

Control your light sources and what the jewellery reflects from its surroundings. In its advice on jewellery photography, Nikon describes using a light tent to soften and diffuse the light. Test the setup with your own materials; a different lens won’t remove reflections on its own.

Do you always need to buy a different lens to get a ring completely in focus?

Not necessarily. At high magnification, depth of field can be limited; focus stacking combines shots taken with different focus points. Keep the camera and subject steady throughout the series, and check whether your camera and workflow support this technique.

When shopping online in the Netherlands, are you entitled to a 14-day cooling-off period and a statutory guarantee?

For an applicable online consumer purchase, you generally have 14 days from delivery to change your mind, according to ACM ConsuWijzer. Consumers are also entitled to a product that meets acceptable standards; the Dutch government states that there is no fixed statutory guarantee period in the Netherlands. If you buy mainly or exclusively for business, consumer protection doesn’t automatically apply; ACM ConsuWijzer notes that limited exceptions may be available for small businesses.