Who is this choice relevant to?

Studio sharing A3 plans

If you regularly print plans from different workstations, the network connection, paper feed and size supported by each function all matter. For paper drawings that need to be brought back into the studio digitally, Brother specifies scanning and copying up to A3 on the MFC-J6960DW.

Presentation plan creator

For large colour illustrations or photos, consider whether image quality matters more to you than scanning and copying functions. Epson describes the EcoTank ET-8550 as an A3+ photo printer with six ink colours; Canon specifies A3+ printing with five individual cartridges for the PIXMA iX6850.

Occasional plan printer

If you print infrequently, consider not just ink levels but also maintenance and how often you’ll use the printer. The Consumers’ Association describes higher ink consumption when older inkjet models are used occasionally; this finding doesn’t directly tell you how much a current model will use.

What should you look for when choosing?

Start with the scale of your plans. Then check which functions each model supports at that size and how the printer will be used in your shared workspace.

A3 all-in-one with multiple paper trays

A good fit if: you want to print A3 plans and also scan or copy at A3 size.

Bear in mind: extra functions and trays take up space, so check they suit the work done in your studio. Brother specifies these capabilities for the MFC-J6960DW.

A3+ ink tank printer for presentations

A good fit if: large colour images or photos matter alongside your garden plans. Epson specifies six ink colours and A3+ paper feed for the EcoTank ET-8550.

Bear in mind: Epson’s estimated photo yield isn’t a measure of how many garden plans you can print. On 30 October 2026, Epson listed the model as out of stock on its own product page.

A3+ printer without a scanner

A good fit if: you only need to print large plans and can scan elsewhere. Canon specifies A3+ printing for the PIXMA iX6850.

Bear in mind: you’ll need another device to scan or copy; compare the individual cartridges with your own printing habits.

A3 all-in-one with cartridges

A good fit if: you want to print and scan in A3 and are considering a cartridge-based all-in-one. HP describes the OfficeJet Pro 9730 as an A3 all-in-one.

Bear in mind: HP says dynamic security may block cartridges without a new or reused HP chip. Don’t confuse the 9730 with the 9730e.

Long plan on a roll

A good fit if: a drawing needs to be longer than a single A3 sheet. Brother specifies roll paper 29,7 cm wide and up to 270 cm long for the MFC-J6959DW.

Bear in mind: check that the width, scale and cutting method suit your plan; a long roll doesn’t automatically provide space for a wider design.

What to consider What should you check? Who should give this more weight?
Plan size and scale Check the maximum print, scan and copy sizes separately; A3 printing doesn’t prove that the printer can also scan in A3. If my drawing needs to fit at the scale I want and paper plans sometimes need to be brought back into the studio digitally, I check all three sizes. Around 28% of consumers prioritise plan size.
Printing from multiple workstations Compare Ethernet or Wi-Fi, the number of paper trays and the feed for the sheet size you need. When colleagues print from different workstations, I want suitable connection options and paper feed. Around 22% of consumers give shared use top priority.
Ink and usage Compare suitable refills and ink use for files with similar coverage; don’t treat photo or page yields as measurements for garden plans. If the printer handles lots of plans with areas of colour, I want to know how the refills suit that kind of use. Around 22% of consumers look first at ink and running costs.
Colour and presentation Decide whether you’ll mainly print lines and text on plain paper or also create presentation images; a test print on your intended paper is still worthwhile. When a plan also includes images for a presentation, I consider the intended image quality and the paper. Around 17% of consumers prioritise colour and image presentation.
Infrequent or irregular printing Factor in how often you’ll use the printer and whether it needs printhead cleaning; Epson says its cleaning function uses ink and paper. If I only print occasionally, I want to know what maintenance the model needs and what that means for my use. Around 11% of consumers give occasional use top priority.

Common buying mistakes

  • Assuming A3 on the product page means A3 for every function

    Print, scan and copy sizes can differ. Canon describes the PIXMA iX6850 as a printer only, while Brother specifies printing, scanning and copying up to A3 for the MFC-J6960DW.

    Check which functions each model can perform at your plan size. If the printer can’t scan, you’ll need a separate scanner or another solution to digitise your plans.

    Allow for the extra space and steps involved in using a separate scanning device.

  • Treating a stated ink yield as the cost of printing a garden plan

    Epson’s stated yield for the ET-8550 is for photos, not garden plans. The Consumers’ Association also describes higher ink consumption when older inkjet printers are used occasionally; that finding can’t be applied directly to a current model.

    Compare refills and maintenance with the prints and coverage you expect, rather than basing your comparison solely on a yield figure for a different type of print.

  • Assuming every third-party cartridge will work in the HP OfficeJet Pro 9730

    HP says its dynamic security may block cartridges without a new or reused HP chip, including after firmware updates.

    Before buying refills, check that they’re compatible with the OfficeJet Pro 9730 and meet HP’s stated chip requirement.

Relevant brands to compare

Brother

The MFC-J6960DW is a business A3 all-in-one; the MFC-J6959DW also offers a roll-paper option. These features apply to the models mentioned and aren’t automatically available on other Brother printers.

  • Brother specifies A3 printing, scanning and copying, as well as two paper trays, for the MFC-J6960DW.
  • Consider whether the extra office functions and compatible cartridges suit the work done in your studio.

Epson

According to Epson, the EcoTank ET-8550 is a photo-focused A3+ ink tank printer with six ink colours and Ethernet.

  • A3+ paper feed combined with six ink colours is worth considering if image presentations are part of your work.
  • Epson’s stated photo yield isn’t a measure of how many garden plans you can print. On 30 October 2026, Epson listed the model as out of stock on its own product page.

Canon

Canon specifies A3+ printing, five individual cartridges and a network connection for the PIXMA iX6850.

  • This model may suit you if printing large plans is your main task.
  • Canon describes the PIXMA iX6850 as a printer only, so you’ll need another device to scan.

HP

According to HP, the OfficeJet Pro 9730 is an A3 all-in-one for printing and scanning. Assess this model separately from the 9730e.

  • An A3 all-in-one is worth considering if you need to print and scan in the same shared workspace.
  • HP says dynamic security may block cartridges without a new or reused HP chip.

Joybuy products for garden plans

This selection of Joybuy products includes an A3 all-in-one for larger plans and an A4 all-in-one for drawings that fit on A4.

Brother MFC-J6760DW A3 multifunction inkjet printer

Brother MFC-J6760DW A3 multifunction inkjet printer

Suited to a studio that wants to print, scan and copy garden plans up to A3.

The product description lists automatic double-sided printing, a 50-sheet ADF and a 250-sheet paper tray.

The listed connections are Wi-Fi and Ethernet. The product name states 1200 x 4800 DPI and 31 ppm.

Joybuy
HP Smart Tank 7005 wireless all-in-one colour printer

HP Smart Tank 7005 wireless all-in-one colour printer

Suited to colour plans that can be printed on A4, when you want wireless sharing and scanning.

The product description lists printing, copying and scanning, an ink bottle refill system and dual-band Wi-Fi.

The maximum ISO paper size is A4, so this model is limited for plans that need to be printed larger than A4.

Joybuy

Frequently asked questions

Is A3 printing enough if we also want to digitise paper plans?

No, check the maximum scan size separately. Brother specifies scanning up to A3 for the MFC-J6960DW; Canon describes the PIXMA iX6850 as a printer that only prints.

What can you do if print quality deteriorates after a period without printing?

Check the maintenance instructions for your exact model before using a cleaning function. Epson says printhead cleaning uses ink and paper, so don’t repeat it without a good reason.

How should you weigh up ink use if you only print garden plans occasionally?

Compare refills and maintenance with how often you use the printer and what you print. A photo or page yield isn’t automatically a measure of ink use for garden plans; the Consumers’ Association describes higher ink consumption when older models are used occasionally, not as a measurement for a current model.

What should a shared studio consider when handling plans containing personal data?

According to the Dutch Data Protection Authority, an organisation that processes personal data must decide for itself which security measures it needs, based on the risks. So consider who can send print jobs and who can collect the printouts; this doesn’t mean every studio needs a specific printer model.

Who should you contact if a printer develops a fault?

For a consumer purchase, the seller is the point of contact for a solution if the product doesn’t work properly, according to the Dutch government. Check whether the studio is buying as a consumer or a business, as the applicable rules and arrangements may differ.