What should you look for when choosing?
Start with the paper you actually want to use. Then compare print size, ink and the features everyone in the studio needs.
| What to consider |
What should you look for? |
Who is this important for? |
| Paper and feeding |
Check the size and permitted media for each feed. Canon lists a range of 64–105 g/m² for plain paper in the G650’s rear tray; this range does not automatically apply to speciality paper. |
I want to feed my own matte or heavier sheets without relying on a general claim; around 31% of consumers put paper compatibility first. |
| Image quality and finishing |
Compare the ink type and test it on your own paper. Paper supplier Red River recommends waiting 24 hours before painting over its media printed with pigment ink; this is not a general drying time. |
If I mainly make image sheets, I want to assess the finish on my own material; around 25% of consumers prioritise image quality and finishing. |
| Frequent printing |
Compare ink use for your own print quantities and types; yields for specified photo or document prints do not necessarily apply to collage sheets. |
If I make lots of test prints and collages, I want to know in advance how my print volume will affect ink use; around 25% of consumers put ongoing printing costs first. |
| Shared use |
Check whether Wi-Fi or Ethernet is right for the studio and whether you need A3 printing or scanning. Epson lists Ethernet for the ET-8550; Brother describes the MFC-J6975DW as supporting A3 printing, scanning and copying. |
When several makers share a printer, I want the connection and features to suit the tasks we do together; around 19% of consumers prioritise shared access. |
Joybuy product selection
This selection focuses on an A3 inkjet printer for shared printing and scanning tasks in the studio.
No image available
Brother MFC-J6760DW A3 inkjet printer
An A3 inkjet option for a shared studio where printing and scanning tasks go hand in hand.
Features listed in the product name: 1200 × 4800 DPI, 31 ppm and Wi-Fi.
Check that your collage paper is suitable for the specific feed; the stated support for paper up to 220 g/m² does not confirm that every surface or coating will work.
View at Joybuy
Frequently asked questions
Can I feed any collage paper through an inkjet printer?
No. Check the size, paper type and feed options for the exact model. Canon lists a specific weight range for plain paper in the G650’s rear tray and also specifies which speciality paper types are supported; don’t assume this information applies to other handmade or coated paper.
Can I paint or glue over a printed collage straight away?
Test your paper, ink and medium together first. Paper supplier Red River recommends waiting 24 hours before painting over its media printed with pigment ink, and notes that the coating affects how water is absorbed. This advice does not provide a general drying time or guarantee for other media or glue.
What should I do if there are streaks or missing colours?
Epson recommends running a nozzle check on its printers first, and cleaning the printhead only if print quality has deteriorated. Cleaning uses ink and paper; refer to your model’s manual for instructions.
Who can help if a printer develops a fault too soon?
For consumer purchases in the Netherlands, statutory guarantee rights apply alongside any manufacturer’s guarantee. ACM ConsuWijzer explains that, under the applicable conditions, the seller must repair, replace or refund a product free of charge if, under normal use, it does not do what you could reasonably expect. These consumer rules do not automatically apply to purchases made in a business’s name.
Where can the studio dispose of an old printer?
For equipment owned by private individuals, the Dutch government describes options including free take-back of an old appliance when you buy a similar one, and collection by local authorities. It states that the retailer take-back scheme does not apply to equipment owned by businesses, so first establish who owns and bought the printer.