Who is this buying guide for?

Travellers who want to block out train noise

If you want to follow a soundtrack without turning up the volume, a secure fit can help. How the in-ears feel also affects whether they remain comfortable. VeiligheidNL explains that a good fit helps reduce sound leakage.

Listeners who focus on soundtrack details

If you want to pick out quiet passages and instruments, consider the sound balance and bass response you prefer. The fit of the eartips matters too. Manufacturers describe different sound profiles, but that doesn’t determine which one will sound best to everyone.

Travellers who often need to pause their listening

If you want to quickly tune in to travel announcements and prefer not to use a cable, consider a wireless option with an ambient sound mode. Remember that it will need charging, and check that the controls suit the way you use your headphones.

What should you look for when choosing?

For film soundtracks on the train, it makes sense to assess the seal and comfort first, then choose between wired and wireless listening and between different sound profiles.

The percentages below show how the main buying priorities compare for consumers choosing in-ear headphones for this situation.

What to consider What should you check? Who is this important for?
Train noise and listening volume Check which eartip sizes and materials are included. Don’t treat a stated noise-reduction figure as a guarantee for your ears. If you want to follow a soundtrack in a noisy carriage without continually turning up the volume, a good seal is a key consideration. Around 31% of consumers put isolation first.
Detail and bass Check the stated sound profile and whether the eartips can be positioned to adjust the sound; make sure the fit works for you too. If you’re mainly interested in the balance between instrumental detail and bass, choosing the right sound profile matters. Around 25% of consumers make sound profile their top priority.
Fit during your journey Check the available eartip sizes and materials, and read the terms before trying the tips. If you want to wear your in-ears for a longer journey, the tips need to seal well without feeling uncomfortable. Around 19% of consumers name comfort as their main buying priority.
Pausing and ambient sound Check the controls, whether there’s an ambient sound mode and the stated battery life with ANC switched on. If you regularly need to listen out for announcements and want to go cable-free, easy-to-use controls and ambient sound are relevant. Around 13% of consumers give priority to this option.
Connections and replacements Check both the connection on your playback device and the connector on the in-ears; see whether suitable replacement parts are available. If you want to avoid connection surprises or be able to replace a cable, choosing the right connector type is essential. Around 12% of consumers prioritise connectivity and maintenance.

Common buying mistakes

  • Assuming a noise-reduction figure guarantees the same result on the train

    Specifications from different manufacturers aren’t automatically comparable. Shure says that isolation depends on factors including your ears, the eartips used and the fit.

    Start by finding eartips that fit well, and don’t compare manufacturers’ specifications as if they were measured during the same train journey.

  • Turning up the volume because your in-ears seal well or have ANC

    The World Health Organization points out that prolonged exposure to louder sounds increases the risk of hearing damage.

    A good seal can help you avoid turning up the volume to drown out background noise. Keep both the volume and your total listening time in mind.

  • Buying wired in-ear monitors without checking the connections

    A 3.5mm plug, MMCX connector and 0.78mm 2-pin connector each serve a different purpose and aren’t necessarily interchangeable.

    Before buying, check the connection on your player and both ends of the cable. You may need a compatible accessory for an adaptor or replacement cable.

  • Assuming you can return any opened in-ear headphones without conditions

    ACM ConsuWijzer lists an exception to the cooling-off period for certain unsealed hygiene products. This doesn’t mean that every pair of in-ears automatically falls under that exception.

    Read the information for the specific product before breaking any seal.

Brands to compare

Etymotic

The wired ER2XR is an option for anyone looking for a close fit and a sound profile that Etymotic describes as having more bass.

  • Etymotic states that the ER2XR provides 35–42 dB of passive noise isolation.
  • This isn’t a personal guarantee or an independent measurement taken on a train. Check that the supplied eartips feel comfortable.

Shure

According to Shure, the wired SE215 has close-fitting eartips, an over-ear cable and a detachable MMCX cable.

  • Shure states that it provides up to 37 dB of noise isolation.
  • Shure says that actual isolation depends on factors including ear shape and fit. Don’t confuse sound isolation with hearing protection.

Sennheiser

According to Sennheiser, the wired IE 200 is designed for listeners looking for balanced sound, with the option to adjust the bass response by changing the position of the eartips.

  • The IE 200 has a detachable MMCX cable with a 3.5mm plug and comes with silicone and foam eartips.
  • There’s no independent comparison of its isolation with the other models listed that you can use as a decisive point of difference.

MOONDROP

The CHU II is a wired in-ear model with a 3.5mm plug and a detachable 0.78mm 2-pin cable.

  • The manufacturer lists three sizes of eartips and interchangeable acoustic filters.
  • Descriptions of distortion or detail reproduction aren’t independent confirmation of performance.

Sony

The WF-1000XM5 is a wireless option with ANC for anyone who wants to listen without a cable and temporarily let in surrounding sounds.

  • Sony lists an ambient sound mode and up to 8 hours of music playback with noise cancelling switched on.
  • That battery life is a manufacturer-stated maximum, not a guaranteed usage time. The fit and controls need to suit you.

Joybuy products

This selection includes wireless in-ears with ANC and wired USB Type-C in-ears for listening on the go. For wired models, check that your playback device supports the connection.

Samsung Galaxy Buds4 Pro True Wireless in-ear headphones with ANC, black

Samsung Galaxy Buds4 Pro, True Wireless ANC, black

A wireless option for anyone looking for ANC and ways to adjust the sound.

The product name specifies True Wireless, in-ear, Active Noise Cancelling and black.

Wireless use requires a compatible Bluetooth device.

Joybuy
Bose QuietComfort Earbuds, black

Bose QuietComfort Earbuds, black

A wireless option for anyone looking for noise cancelling and the option to let in surrounding sounds from time to time.

The product name specifies QuietComfort Earbuds in black.

Wireless use requires a compatible Bluetooth device.

Joybuy
Samsung EO-IC100 wired in-ear headset, USB Type-C, black

Samsung EO-IC100, wired in-ear headphones, USB Type-C, black

A wired option for anyone who wants to listen without recharging and can use a USB Type-C connection.

The product name specifies a wired in-ear headset with USB Type-C.

The connection requires a compatible audio output on your playback device.

Joybuy
Sony IER-EX15C wired in-ear headset, USB Type-C, white

Sony IER-EX15C, wired in-ear headphones, USB Type-C, white

A wired option for anyone who wants to be able to pause while listening and can use a USB Type-C connection.

The product name specifies a wired in-ear headset with USB Type-C.

The connection requires a compatible audio output on your playback device.

Joybuy
Google Pixel Buds Pro, Carbon

Google Pixel Buds Pro, Carbon

A wireless option for anyone looking for ANC and the option to adjust the sound.

The product name specifies Pixel Buds Pro in Carbon.

Wireless use requires a compatible Bluetooth device.

Joybuy

Frequently asked questions

Can a good seal help you keep the volume down?

A good seal can help you avoid turning up the volume to drown out background noise. Volume and total listening time still matter: the World Health Organization gives an average of 80 dB for up to 40 hours per week as an example, not as a setting that every device automatically guarantees.

When should you choose wired in-ears, and when should you choose wireless ANC?

Wired in-ears suit anyone who doesn’t want to recharge and has a compatible connection; wireless in-ears with ANC suit anyone who wants to listen without a cable and temporarily let in surrounding sounds. Check the fit and controls for both options, and remember that wireless models need charging.

How can you check whether wired in-ears will work with your device?

Check both the connection on your playback device and the connector on the earphones. According to the manufacturer, the MOONDROP CHU II uses a 3.5mm plug and a 0.78mm 2-pin cable connection; according to Shure, the Shure SE215 has an MMCX cable. Follow the instructions for the specific product when cleaning or replacing parts.

Can you listen to music on the train with in-ears?

NS’s house rules state that passengers must not disturb others with loud music and that the silence zone must remain quiet. These are NS rules and are not evidence of a uniform rule for every Dutch rail operator.