Who are these in-ear headphones suitable for?

Solo enthusiast

You listen to passages repeatedly and want to pick out the details of the guitar. The fit and sound profile both play a part in finding the right in-ear headphones for you.

Quiet-library listener

You want to listen without disturbing others, so you pay attention to a good fit, a controlled volume and the rules at your location. An isolation rating on its own doesn’t tell you how much sound people nearby can hear.

Guitarist playing along

You want to hear the recording and your own instrument at the same time. Check the signal path and whether other people can hear you playing in that location.

What should you look for in in-ear headphones for a guitar solo?

First, choose earbuds that fit comfortably and create a good seal, then check whether the sound suits the way you listen. If you want to play along, assess the equipment and the venue’s rules separately too.

What to consider What to look for when buying Who should prioritise it?
Guitar detail and sound Compare the same recording at a low volume, and only once the earbuds have a good seal. If you replay passages to follow the guitar part, you’ll want a sound balance that works for you. Around 26% of consumers put the solo’s detail first.
Keeping the sound to yourself At a moderate volume, check whether someone next to you can hear anything; don’t use an isolation rating to judge sound leakage. In a quiet library, you’ll want to listen without disturbing others. Around 26% of consumers prioritise listening without causing a nuisance.
Comfort for longer listening sessions Check which sizes and types of ear tips are included, and read the returns policy before trying them on. If you listen to passages repeatedly, you’ll want earbuds that stay comfortable and maintain a good seal. Fit is the main consideration for around 21% of consumers.
Connection and playing along Check that the plug fits your playback source and, if you’re playing along, find out how to send both the guitar and the recording to your earbuds. If you want to hear your guitar alongside the recording, your equipment needs to be able to provide both signals. Around 16% of consumers prioritise this connection requirement.
Cable, ear tips and maintenance Check the connection on the exact model and which replacement ear tips or cables are compatible with it. If replaceable parts matter to you, you’ll want to know which parts fit your model. Around 11% of consumers prioritise maintenance and replaceability.

Things to check before you buy

  • Assuming a high isolation rating means others won’t hear anything

    A stated attenuation figure tells you something about the outside noise the wearer can hear, not how much music a neighbour might hear.

    Check the fit and sound leakage at a moderate playback volume.

  • Assuming in-ear headphones work directly with a guitar

    In-ear headphones reproduce what the connected source provides; the instrument itself may still be audible too.

    Map out the signal path before you buy, and check that playing at your chosen location won’t disturb anyone.

    If you want to play along, you may need equipment that sends both the guitar and the recording to a pair of headphones.

  • Trying on earbuds before checking the returns policy

    When you buy online, conditions for opened hygiene products may apply.

    Before trying them on, check the returns policy and which sizes of ear tips are included.

Brands to compare

Etymotic

The ER2SE is worth considering if passive isolation and what Etymotic describes as a flat sound profile matter to you.

  • Etymotic gives the ER2SE a passive attenuation rating of 35–42 dB and says it has a replaceable cable.
  • This manufacturer’s rating doesn’t measure how much sound people nearby can hear; check that the ear tips fit comfortably too.

Shure

According to Shure, the wired SE215 comes with different types and sizes of ear tips and a detachable cable.

  • Shure lists a 3.5mm cable with an MMCX connection and describes the sound as having deep bass.
  • The stated isolation rating of up to 37 dB doesn’t measure the sound people nearby can hear, nor does it provide a direct comparison with other models.

Sennheiser

The IE 100 PRO is a range of in-ear monitors with replaceable accessories.

  • Sennheiser lists an impedance of 20 Ω and sound attenuation of less than 26 dB for the IE 100 PRO; its accessory information mentions replaceable cables.
  • Check the exact version: the product information covers both wired and Wireless variants.

Moondrop

The LAN is a wired in-ear model with a detachable cable and ear tips in three sizes.

  • Moondrop specifies a 0.78mm 2-pin cable connection and a 3.5mm plug.
  • Check that the connector is compatible if you buy a replacement cable; no comparable measurement of isolation or sound leakage is provided.

Joybuy products for listening to recordings

These Joybuy products are in-ear headphones for listening to recordings, including wireless models and a wired USB-C option. Check that each model’s connection is compatible with your playback source.

AOC ACT2615 ANC wireless earbuds

AOC ACT2615 ANC wireless earbuds

A wireless option for listening to recordings; the product title lists Bluetooth 6.0.

View at Joybuy
Acer OHR548 wireless in-ear headphones

Acer OHR548 wireless in-ear headphones

A wireless option for listening to recordings; the product title lists Bluetooth 5.4.

View at Joybuy
Samsung Galaxy Buds4 Pro true wireless earbuds, black

Samsung Galaxy Buds4 Pro True Wireless, black

A true wireless option for replaying recordings; the product specifications list ANC and a 9-band adjustable equaliser.

View at Joybuy
Xiaomi Redmi Buds 8 Active Black

Xiaomi Redmi Buds 8 Active Black

A wireless option for listening to recordings. The stated specifications are a 14.2 mm driver, Bluetooth 5.4 and SBC/AAC codecs.

View at Joybuy
Bose noise-cancelling wired earbuds, black

Bose noise-cancelling wired earbuds, black

A wired option for replaying recordings; the product description lists a USB-C connection, three sizes of ear tips and two sizes of stability bands. Check that USB-C is compatible with your playback source.

View at Joybuy

Frequently asked questions

Can I hear my guitar and the recording at the same time using just in-ear monitors?

No, the in-ear headphones themselves don’t provide those signals; you need a source that sends both your guitar and the recording to the earbuds. Roland describes this function for the KATANA:GO. Check the connections on your own equipment, and bear in mind that your guitar may still be audible on its own.

How should I put in and maintain my earbuds?

Try the included ear tips to find ones that fit comfortably and create a good seal. Etymotic recommends keeping its earbuds clean and dry and cleaning the ear tips; for other models, follow the manufacturer’s instructions.

How can I avoid listening too loudly when I keep rewinding a passage?

Keep the volume low and don’t try to drown out background noise by turning it up. The World Health Organization also recommends limiting listening time and taking regular breaks; the actual sound level depends on your own setup.

Can I return in-ear headphones bought online in the Netherlands if they don’t fit properly?

According to ACM ConsuWijzer, online consumer purchases usually come with a cooling-off period of up to 14 days after delivery. An exception may apply to unsealed hygiene products, so check how the seller applies this to these earbuds before trying them on. The legal guarantee for a faulty product is separate from a voluntary manufacturer’s warranty.