Who is this relevant for?

Anyone who wants to compare rooms at the same time

You want to check the readings in your room and shared areas at the same time. TFA Dostmann describes the KLIMA-MONITOR 30.3054.10 as having a base station with three transmitters.

Students who want to move one meter around

You take readings in different rooms from time to time and mainly want a device that’s easy to read at a glance. The Met Office explains that relative humidity depends on temperature; TP-Link sets out which features depend on a hub.

Anyone who wants to track changes over time

You want to be able to check readings after, for example, showering, cooking or airing the room. Govee and TP-Link describe chart features for specific models; Milieu Centraal recommends extra ventilation when cooking and showering.

What should you look for when buying?

One portable meter

Choose this if: you want to measure rooms one after another from time to time and can move the meter between them.

Trade-off: the readings won’t be taken at the same time, so note the temperature, time and location for each room.

Multiple transmitters

Choose this if: you want to monitor rooms at the same time and can place a transmitter at each measuring point.

Trade-off: you’ll need space for multiple sensors and should check whether wireless reception works in your building.

App or smart sensor

Choose this if: you want to look back at readings from different times in charts or save them.

Trade-off: features vary by model; some require a connection or compatible hub.

The percentages below show which buying consideration matters most for this choice; consumers’ needs are grouped by their main reason for buying.

Buying consideration What to look for Who is this important for?
Comparing rooms at the same time Check how many sensors are included, whether each one measures temperature and relative humidity, and how the readings are displayed. If I want to see differences between rooms at the same time, multiple measuring points are my priority. Around 36% of consumers with this buying need prioritise simultaneous readings.
Interpreting readings accurately Measure the temperature too, and keep a note of the measuring location and time; don’t place the sensor right next to a heat or cold source. When I measure rooms one after another, I note the temperature, time and location so I can compare the readings properly. Around 29% of consumers with this buying need prioritise comparable readings.
Easy-to-read display Check what the display shows, whether minimum and maximum readings are available, and which batteries are required. If I mainly want to check a reading now and then, I’d rather choose a meter that’s easy to read at a glance. Around 21% of consumers with this buying need prioritise simplicity.
Tracking changes over time Check what history, charts or alerts the exact model offers and whether they require an app, connection or hub. If I want to look back at how readings change at different times, I focus on data storage and charts. Around 14% of consumers with this buying need prioritise tracking changes over time.

Common buying mistakes

  • Assuming a higher humidity percentage means there’s more water vapour

    Relative humidity depends on temperature. So, a difference between rooms doesn’t in itself tell you how much more water vapour one room contains.

    As well as the percentage, note the temperature and compare readings taken at similar times and in similar locations.

  • Assuming all app features work without extra equipment

    According to TP-Link, features such as remote monitoring and data export on the Tapo T315 require a Tapo hub. The batteries required also vary by model.

    Before buying, check which features work on the device itself and which require a hub or connection, and check which batteries are included.

    A smart feature may require a compatible hub; some meters need batteries bought separately.

  • Treating a humidity reading as a diagnosis of mould or a leak

    A meter shows readings, but it can’t identify the cause of a damp problem. Damp or mould may, for example, be linked to a leak or limited ventilation.

    Keep a record of ongoing problems and report any defects in a rented property to your landlord.

  • Choosing a version based on the product name alone

    Checking the full model name helps you make sure you’re choosing the version that suits your preferred display, features and accessories.

    Before buying, compare the full model number and the specifications that matter most to you with the manufacturer’s information.

Brands and models to consider

TFA Dostmann

The range includes both standalone thermo-hygrometers and a system with multiple transmitters, to suit different ways of taking measurements.

  • According to TFA Dostmann, the 30.5027.01 displays minimum and maximum readings. For the KLIMA-MONITOR 30.3054.10, the manufacturer describes a base station with three transmitters for measurements in up to four locations.
  • TFA Dostmann states that the AAA batteries for the KLIMA-MONITOR base station and transmitters are not included.

Govee

The H5075 Bluetooth hygrometer is designed for anyone who wants to combine a display with app-based history.

  • According to Govee, the H5075 has a 3-inch display, a stated humidity accuracy of ±3% RH, and chart and CSV export features.
  • It’s a Bluetooth model. Check the range in the locations where you plan to use it, and don’t assume it has a standalone Wi-Fi connection without checking the model information.

TP-Link

The Tapo T315 combines an e-ink display with smart features for anyone using or planning to buy a compatible Tapo setup.

  • TP-Link lists a 2.7-inch display and a stated humidity accuracy of ±3% RH for the T315.
  • According to TP-Link, a Tapo hub is required for features such as remote monitoring, automation and data export. Also check whether the regional Sub-1G band is compatible.

Xiaomi

According to Xiaomi, the Temperature and Humidity Monitor Clock LYWSD02MMC combines temperature and humidity readings with a clock, e-ink display and Bluetooth Low Energy.

  • Xiaomi lists a measuring range of 0–99% RH and a history feature in the Xiaomi Home app for this model.
  • According to Xiaomi, it requires two CR2032 batteries, which must be bought separately. The manufacturer lists a Mi Smart Home Hub for connecting it to other Xiaomi devices.

Products at Joybuy

This selection focuses on digital meters and smart sensors for reading or tracking temperature and humidity in rooms.

TP-Link Tapo Smart Temperature & Humidity Monitor

TP-Link Tapo Smart Temperature and Humidity Monitor

Ideal if you want to track temperature and humidity readings using app features.

According to the product information, smart features require a compatible Tapo hub.

View at Joybuy
TP-Link Tapo T315 Indoor Temperature & Humidity Sensor, Stand-Alone Wireless

TP-Link Tapo T315 Temperature and Humidity Sensor

Ideal if you want to read measurements on the display as well as use smart features.

TP-Link lists a 2.7-inch e-ink display and a stated humidity accuracy of ±3% RH. According to TP-Link, a Tapo hub is required for features such as remote monitoring and data export.

View at Joybuy
Xiaomi Mi Temperature and Humidity Monitor 3

Xiaomi Mi Temperature and Humidity Monitor 3

Ideal if you want to check the temperature and humidity in a room and compare readings between rooms.

View at Joybuy
Xiaomi Temperature & Humidity Monitor Clock LYWSD02MMC

Xiaomi Temperature & Humidity Monitor Clock LYWSD02MMC

Ideal if you want to check the temperature and humidity on a meter that also has a clock.

Xiaomi lists a range of 0–99% RH and a history feature in the Xiaomi Home app. According to Xiaomi, this model requires two CR2032 batteries, which must be bought separately.

View at Joybuy

Frequently asked questions

Can you compare percentages from a warm room and a cool room directly?

You can compare the readings, but note the temperature too: relative humidity describes how saturated the air is at that temperature. If possible, take readings at similar times and avoid locations close to heat or cold sources.

Where should you place a hygrometer sensor?

Choose a spot with good airflow, away from radiators, windows, ventilation outlets and heat-producing appliances. TP-Link warns that these locations can affect readings; keep the measuring spot the same when taking repeated readings for comparison.

What should you check about batteries and a possible hub?

Check the requirements for the exact model. TFA Dostmann states that the AAA batteries for the KLIMA-MONITOR 30.3054.10 base station and transmitters are not included. Xiaomi states that the LYWSD02MMC requires two CR2032 batteries, which must be bought separately. According to TP-Link, a compatible Tapo hub is required for features such as data export and remote monitoring with the Tapo T315.

What should you do if you find mould in your rented room?

A hygrometer can help you record humidity readings, but it won’t fix the cause. The Dutch government advises reporting problems such as damp, leaks or mould to your landlord first.