Who might need to choose a switch like this?

Lab administrator on a shared network

You want to manage lab traffic or separate it from the network used by others in the studio. First, work out what separation your entire network setup requires. MikroTik and QNAP list management features for the models mentioned here.

Cluster builder with fast storage

You’re connecting several hosts and possibly a NAS. Choose ports and uplinks to match the network interfaces on those devices, rather than simply going by the highest speed printed on the box. MikroTik and QNAP list models with 2.5GbE ports and 10GbE connections.

Studio user with a switch beside the desk

Think about where you’ll place it, its cooling type and its power supply. Ubiquiti and Linksys describe fanless models, while MikroTik specifies one fan for the CRS310-8G+2S+IN. That specification doesn’t tell you how noisy a switch will be in your room.

What should you look for when choosing?

First, decide whether the shared connection needs VLAN separation. Then count the host ports and uplinks you’ll need at the same time, and check the cooling type, power supply and any PoE requirements.

Consideration What to look for when buying Who is this important for?
Management and separation Check whether you need VLANs, whether the switch supports them, and who manages the router and shared uplink. If I need to separate lab traffic on a shared connection, I want to know where VLANs will be configured. Management and separation are top priorities for around 33% of consumers.
Host ports and uplinks Count host interfaces and required uplinks separately. Treat SFP+ and RJ45 as different connection types, and don’t count combo ports twice. I want enough suitable connections for my cluster hosts and any NAS. Host ports and uplinks are the main buying consideration for around 27% of consumers.
Noise and placement Check the cooling type of the exact model, where the power supply is located and whether there’s enough ventilation at your chosen spot. If the switch is beside my workspace, I want to account for a fan running in the same room. Noise and placement are top priorities for around 27% of consumers.
PoE and connection accessories Check which devices need PoE, what type of power supply is used, and whether cables or modules are compatible with the connections. I want to know whether the switch needs to power connected devices and what accessories my setup requires. PoE, power supplies and connection costs are the main buying consideration for around 13% of consumers.

Common buying mistakes

  • Choosing an unmanaged switch when you need VLAN management

    Linksys describes the LN2308 as unmanaged, while MikroTik lists VLAN support for the CRS310-8G+2S+IN. A switch may therefore lack the management features you need.

    Before choosing a model, agree with the administrator of the shared connection on where the separation needs to be configured.

    If you need management on the switch, you may need a different network setup or an additional managed switch.

  • Counting a combo port as two connections you can use at the same time

    QNAP describes the QSW-M2108-2C as having two 10GbE combo ports. For each combo port, you choose between RJ45 and SFP+; they aren’t two ports that can be used at the same time.

    Map out the connections that need to be active simultaneously and count each combo port once.

    If you need more simultaneous connections, you may need an extra switch port or a different connection solution.

  • Assuming a fanless design means your whole setup will be silent

    The models reviewed differ in cooling, power supply and 10GbE connection type. A fanless design alone says nothing about the noise made by other equipment in the same room.

    Check the exact model’s cooling type, power method and required connections for the location you have in mind.

    Also check whether your chosen power supply or connections require extra cables, modules or other components.

Brands to compare

MikroTik

MikroTik describes the CRS310-8G+2S+IN as a managed switch with eight 2.5GbE ports and two SFP+ ports.

  • MikroTik lists VLANs and link aggregation among its supported features.
  • The manufacturer specifies one fan, but this doesn’t establish how noisy the switch will be in a shared workspace.

QNAP

QNAP describes the QSW-M2108-2C as a web-managed switch with eight 2.5GbE ports and two 10GbE RJ45/SFP+ combo ports.

  • According to QNAP, its web interface is designed for browser-based management.
  • Each combo port gives you a choice of connection type, not two connections that can be used at the same time.

Ubiquiti

According to Ubiquiti, the USW-Flex-2.5G-8 combines eight 2.5GbE ports with one 10GbE RJ45/SFP+ combo uplink.

  • Ubiquiti describes the model as fanless and lists USB-C and PoE+ as power options.
  • The combo port is a single uplink. Check which power method suits your setup.

Linksys

According to Linksys, the LN2308 is an unmanaged switch with eight 2.5GbE ports.

  • Linksys describes this model as having a fanless design.
  • This unmanaged model doesn’t offer the VLAN management found on the managed switches mentioned here. The manufacturer’s table doesn’t list PoE output for the LN2308.

TP-Link

TP-Link Netherlands describes the TL-SG108-M2 as an unmanaged desktop switch with eight 2.5GbE ports.

  • TP-Link lists a NAS and server as possible uses.
  • The specifications listed for this model don’t confirm VLAN management or a dedicated 10GbE uplink.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Is a VLAN switch all I need to separate my lab from the shared network?

No. The rest of the network equipment and the shared connection also need to be configured appropriately. MikroTik lists VLAN support for the CRS310-8G+2S+IN; agree on the setup with whoever manages the router or uplink.

Can I connect RJ45 and SFP+ to the same combo port at the same time?

No. Treat a 10GbE RJ45/SFP+ combo port as a single connection, and choose which connection type to use. QNAP lists two combo ports for the QSW-M2108-2C, not four simultaneous 10GbE connections.

What should I check if I’m installing it beside my desk?

Check the cooling type, ventilation clearance, power method and the cables you’ll need. MikroTik specifies one fan for the CRS310-8G+2S+IN; Ubiquiti describes the USW-Flex-2.5G-8 as fanless and lists USB-C or PoE+ power.

What product safety rules apply when a switch is sold in the Netherlands?

Electrical and electronic equipment sold in the Netherlands must comply with the applicable European product rules. Business.gov.nl states that, once conformity has been established, the manufacturer applies the CE marking and draws up an EU declaration of conformity. The rules that apply also depend on the device’s design.

What about the guarantee if I buy the switch as a consumer?

According to the Dutch government, when you buy something as a consumer, you’re entitled to a product that works as it should, but the Netherlands has no fixed statutory guarantee period. A manufacturer’s guarantee is separate from this. This information applies to purchases made as a consumer.