Who is this choice relevant to?

Home worker with a room that has poor coverage

If you back up work documents from one regular workspace, first test the connection where you work and at a possible intermediate point. The Consumentenbond recommends placing a Wi-Fi extender midway through the home.

Housemate on a busy Wi-Fi network

If you share your connection with housemates and several active devices, check that a solution is suitable for your existing router, the space available and any cabling. The Consumentenbond explains how to test Wi-Fi with several devices connected.

Worker with confidential documents

If you use sensitive files at home, consider more than just network coverage: check with your organisation which storage and access arrangements are permitted. The Autoriteit Persoonsgegevens offers advice on documents and a secure home-working environment.

What should you consider when choosing?

Standalone wireless repeater

Suitable when: one room has particularly poor coverage, there is no route for a cable and you can place the repeater somewhere with a strong enough router signal.

Trade-off: the connection between the repeater and router remains wireless, so placement and network congestion still matter.

Wired access point

Suitable when: you can run an Ethernet cable to a suitable spot near your workspace and the device has an appropriate access point mode.

Trade-off: the cable replaces the wireless connection to the router, but you’ll need a practical cable route and agreement with others in your shared home.

Mesh system with multiple nodes

Suitable when: several rooms need coverage and everyone in the home can manage the network together.

Trade-off: multiple nodes require more planning and management. The stated Wi-Fi figures are not a measure of backup throughput in your home.

No additional Wi-Fi device

Suitable when: Wi-Fi already works well where you work, but your internet connection or storage service is the limiting factor.

Trade-off: a network device is no substitute for a backup strategy; check with your organisation where work documents may be stored.

Consideration What to look for Which consumers
Coverage at the backup location Test the connection where you work and at a possible repeater location; check the placement guidance and access point mode. If you transfer work files from one regular room, you’ll want to know whether the signal reaches the intermediate point too. Around 33% of consumers prioritise coverage in that room.
Use by housemates Check the router, device Wi-Fi support, how many nodes you need and whether cabling is possible. If you share the connection, you’ll want the solution to suit everyone using the network at the same time. For around 27% of consumers, shared network use is their main concern.
Storage of work documents Ask your organisation which server or storage service is permitted, and check that you can restore a backup. If you handle confidential documents, you’ll want to know in advance where files may be stored and who can access them. Around 20% of consumers prioritise this protection and permitted storage.
Installation and management Check mesh feature compatibility, the number of nodes and ports, power consumption and who will manage the network. If you’re looking for a practical solution for a shared home, you’ll want to agree with your housemates on installation and management. For around 20% of consumers, practical considerations come first.

Avoiding common buying mistakes

  • Assuming higher Wi-Fi speed means a faster cloud backup

    A Wi-Fi specification doesn’t tell you how fast the entire connection to the storage service will be. Placement and the connection between a wireless repeater and the router also play a part.

    Test the connection in your home office and distinguish between a local coverage problem and a limitation of your internet connection or storage service.

  • Confusing compatibility with every router for mesh compatibility

    Mesh features such as TP-Link OneMesh and ASUS AiMesh have specific compatibility requirements.

    Before buying, check your router’s make and model, and whether it supports the mesh feature you want to use.

  • Taking better Wi-Fi as permission to make a personal backup of work files

    Network coverage and the security or permitted storage of work documents are separate issues.

    Check storage arrangements with your organisation and make sure you can restore a backup.

  • Overlooking the number of nodes and power consumption

    A solution for several rooms may have more nodes that stay switched on continuously than a solution for one home office.

    Check how many nodes you need and look at the stated energy consumption before choosing a system.

    Multiple nodes use electricity and need space and power sockets; also consider how each node will be managed.

Brands to compare

TP-Link

The RE605X is a standalone repeater, while Deco X50 is a mesh range. They are different networking solutions.

  • TP-Link lists gigabit Ethernet and an access point mode for the RE605X. For Deco X50, the manufacturer lists three gigabit ports per node.
  • OneMesh requires a compatible OneMesh router. Stated Wi-Fi and coverage figures are not independent measurements taken in a shared home.

FRITZ!

The FRITZ!Repeater 1200 AX is a standalone repeater which, according to the manufacturer, can also connect to a FRITZ!Box via gigabit LAN.

  • FRITZ! describes automatic transfer of settings with a FRITZ!Box, as well as use with other routers.
  • This doesn’t mean that FRITZ! mesh features work with every other router.

ASUS

The RP-AX58 is a standalone Wi-Fi 6 range extender; AiMesh is relevant if you have a compatible ASUS router.

  • ASUS describes use with other routers and lists AiMesh support for compatible AiMesh devices.
  • The AiMesh feature described requires a compatible device; speed claims apply under ASUS’s stated technical conditions.

devolo

The WiFi 6 Repeater 5400 is designed as a standalone repeater and, according to devolo, also has an access point mode for use with a network cable.

  • The manufacturer describes connecting via LAN when network cabling is available.
  • devolo describes mesh networking with other devolo Wi-Fi products; the stated maximum data rate is not a measured backup throughput.

Joybuy products for this situation

These products are designed to provide mesh coverage across several rooms or to work as an access point connected via Ethernet; they are not standalone repeater models.

TP-Link Deco X50 mesh system, 3-pack

TP-Link Deco X50 mesh system (3-pack)

A mesh system for extending coverage across several rooms.

The product listing specifies Wi-Fi 6, dual-band 2.4 GHz and 5 GHz, three gigabit ports per node and optional Ethernet backhaul.

Multiple nodes need more planning and management than a single standalone repeater. The device doesn’t make backups itself; check with your organisation where work documents may be stored.

View at Joybuy
TP-Link Deco XE75 Pro mesh system, 3-pack

TP-Link Deco XE75 Pro (3-pack)

A three-node mesh system for extending network coverage across several rooms.

The product information specifies tri-band Wi-Fi 6E and three Ethernet ports per node, including one 2.5-gigabit port.

Multiple nodes need planning and management. Stated Wi-Fi speeds aren’t a measure of backup throughput in your home; check work storage arrangements with your organisation.

View at Joybuy
TP-Link Deco XE75 tri-band mesh system

TP-Link Deco XE75 tri-band mesh system

A three-node mesh system for extending coverage across several rooms.

The product information specifies tri-band Wi-Fi 6E, three Ethernet ports per node and support for wired connections.

Multiple nodes need more planning and management than a single standalone repeater. The device doesn’t make backups itself; check work storage arrangements with your organisation.

View at Joybuy
TP-Link Deco X50 mesh system, 2-pack

TP-Link Deco X50 mesh system (2-pack)

A two-node mesh system for extending Wi-Fi coverage to more than one area.

The product information specifies Wi-Fi 6, dual-band 2.4 GHz and 5 GHz, three gigabit ports per node and optional Ethernet backhaul.

Multiple nodes need planning and management. The stated Wi-Fi features don’t tell you what backup throughput you’ll get in your home; check work storage arrangements with your organisation.

View at Joybuy
TP-Link Omada EAP653 Wi-Fi 6 access point

TP-Link Omada EAP653 Wi-Fi 6 access point

An access point for anyone who can run an Ethernet connection to their chosen location.

The product information specifies Wi-Fi 6, one gigabit Ethernet port and Power over Ethernet (PoE).

This option requires a practical Ethernet connection and PoE power. The device doesn’t make backups itself; check with your organisation where work documents may be stored.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Don’t place it where the router signal has already dropped out. Try an intermediate point, use the signal indicator or placement guide, then test the connection where you work.

Does a Wi-Fi extender also back up your work documents?

No. A Wi-Fi extender improves network coverage, but doesn’t make backups itself. Check with your organisation where work documents may be stored and make sure you can restore your backup. The National Cyber Security Centre advises keeping backups on at least two different types of media.

Can you store sensitive work files with your personal cloud service?

Don’t assume it’s permitted just because you have secure Wi-Fi. The Autoriteit Persoonsgegevens recommends a secure home-working environment; check with your organisation which storage service is approved for work files.

What product requirements apply to a Wi-Fi repeater sold in the Netherlands?

According to the Rijksinspectie Digitale Infrastructuur, radio equipment sold in the Netherlands must meet the applicable European requirements and carry a CE mark. Check the marking and specification of the actual product; a general model listing doesn’t prove which version will be supplied.