Who is this for?

Gamer with a room upstairs

You mainly want a stable connection for your PC or console, and can check whether it’s possible to run a network cable to your gaming setup.

Home worker in a room at the far end of the house

Your main issue is coverage over a distance, through walls or between floors. That’s why the placement of Wi-Fi points and how they connect to each other deserve attention.

Home with no route for a cable

You want to get Wi-Fi to both rooms without installing new cabling, so you’ll also need to consider the wireless connection between any mesh points.

What should you look for?

Wired access point

Choose this if: there’s a usable cable route upstairs or to the study, and a reliable, predictable connection is important.

Bear in mind: you’ll need to run a cable, and check the ports and connection mode of the access point you choose.

Wireless mesh points

Choose this if: running cables isn’t practical and you need Wi-Fi in both locations.

Bear in mind: the distance, walls and floors. Place the extra point where it can still maintain a good connection to the main network.

Move your router or add an access point

Choose this if: your measurements suggest the router is poorly positioned or there’s a problem in just one room.

Bear in mind: whether your existing connection and equipment allow you to move the router or use access point mode.

What to consider What should you check? Who is this important for?
Gaming stability Check whether a cable can reach your PC or console, and whether an extra access point supports Ethernet backhaul. If I game upstairs, I want a connection that doesn’t rely on a wireless hop when a wired connection is possible. Around 29% of consumers prioritise stability when gaming.
Coverage in the study Measure the connection where you work and find a spot for an extra point with power and a usable connection to the network. If I work in a room at the far end of the house, I want coverage there despite the distance and any walls or floors. Around 29% of consumers give coverage in the study top priority.
Connection without new cabling Find a suitable spot in between and check the exact model’s wireless backhaul capabilities. If I can’t run a cable, the connection between the points still needs to be usable. Around 24% of consumers say that having no route for a cable is a deciding factor.
Connecting to existing equipment Test your internet speed over a cable, then check the connection mode and available Ethernet ports. If I want to keep my existing equipment and limit spending, I want to know whether an extra point will be enough. Around 18% of consumers prioritise compatibility with existing equipment and the overall cost.

Common pitfalls

  • Assuming a high Wi-Fi speed means good reception in both rooms

    Distance and obstacles can weaken the signal. With mesh, the connection between the points matters too.

    Measure the connection in your gaming space and study, and check the route between the Wi-Fi points as well.

    Depending on your measurements, you may still need a cable, an extra point or a different placement.

  • Assuming a wired console makes the whole connection wired

    Connecting your console to a mesh point by cable doesn’t change the fact that the point may connect to the main router wirelessly.

    Check the connection from your device to the Wi-Fi point separately from the connection between the point and the main network.

    If you also want to connect the points to each other by cable, you’ll need a cable route between them.

  • Assuming 2-packs, 3-packs and different model variants are interchangeable

    Pack sizes and connection options can vary between versions. For example, the Deco X50-PoE isn’t necessarily the same variant as the Deco X50.

    Before comparing, check the full model name, number of units and ports on the exact version.

    A different pack size or connection option may mean you need another unit or extra cabling.

Brands to compare

TP-Link

Deco mesh systems, including the Deco X50, are worth considering if you want to position several Wi-Fi points and are looking at wired backhaul or access point mode.

  • According to the manufacturer, each Deco X50 unit has three gigabit ports and supports optional Ethernet backhaul, as well as router and access point modes.
  • The Deco X50 is dual-band. If cabling isn’t possible, assess the connection between the points separately; these features don’t necessarily apply to other Deco variants.

ASUS

The ZenWiFi BD4 and compatible AiMesh devices are worth considering if you’re looking for a setup you can expand and faster wired ports.

  • ASUS’s official specifications list Wi-Fi 7 on 2.4 and 5 GHz, two 2.5G ports per unit and access point mode for the BD4.
  • The BD4 isn’t a tri-band model. Check the exact pack size and version; the manufacturer’s specifications aren’t a measurement of performance in your home.

FRITZ!

FRITZ! repeaters and mesh sets are particularly useful for expanding an existing FRITZ! setup. A repeater can also be used with another modem router.

  • The manufacturer lists one gigabit LAN port on the FRITZ!Repeater 1200 AX, which can be used for a device or to connect to the FRITZ!Box.
  • Centralised FRITZ! mesh features require a compatible FRITZ! setup. If you have a different router, don’t assume it will offer the same controls.

NETGEAR

The Orbi RBK763S is one option if a wireless connection between the router and satellites is important to you.

  • NETGEAR describes the RBK763S as having a dedicated router-to-satellite connection and seven gigabit ports across the set.
  • The manufacturer says one year of NETGEAR Armor is included. Check the terms and any costs after that; the stated coverage area doesn’t guarantee coverage in your home.

Joybuy products

These Joybuy products are mesh sets for Wi-Fi across several rooms. For each exact version, check the number of units, the ports and whether you can connect the points to each other by cable.

TP-Link Deco X50 mesh set with 3 units

TP-Link Deco X50 (3-pack)

A mesh set with three units for anyone looking to connect several rooms and considering Ethernet backhaul.

Wi-Fi 6, dual-band (2.4 and 5 GHz); three gigabit ports per unit and optional Ethernet backhaul.

Joybuy
TP-Link Deco XE75 Pro mesh set with 3 units

TP-Link Deco XE75 Pro (3-pack)

A mesh set with three units for anyone looking to extend Wi-Fi across several rooms and connect wired devices.

Tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz; each unit is listed with two gigabit ports and one 2.5-gigabit port.

Joybuy
TP-Link Deco XE75 mesh Wi-Fi system

TP-Link Deco XE75

A mesh Wi-Fi system for anyone looking to create a connection across several rooms.

Tri-band Wi-Fi 6E on 2.4, 5 and 6 GHz.

Joybuy
TP-Link Deco X50-PoE mesh set with 3 units

TP-Link Deco X50-PoE (3-pack)

A mesh set with three units for anyone looking to connect several rooms and use PoE power for flexible placement.

Wi-Fi 6, dual-band and Power over Ethernet; two Ethernet ports per unit.

Joybuy
TP-Link Deco X50 mesh set with 2 units

TP-Link Deco X50 (2-pack)

A mesh set with two units for anyone looking to connect two rooms and considering Ethernet backhaul.

Wi-Fi 6, dual-band (2.4 and 5 GHz); three gigabit ports per unit and optional Ethernet backhaul.

Joybuy

Frequently asked questions

Should I buy a new router or a faster broadband plan first?

Not until you’ve measured the connection. Connect a computer using a network cable and compare that connection with Wi-Fi in both locations. If the wired connection is also slower than expected, investigate your provider’s connection first.

Where should I place an extra wireless mesh point?

Don’t place the point only where Wi-Fi is already barely reaching: it also needs a usable connection to the rest of the network. If you can run a cable, a wired point will be less reliant on wireless coverage between the points.

Can I keep my provider’s modem?

Yes, with a system that supports access point mode, provided it’s compatible with your connection and settings. Access point mode is listed for the TP-Link Deco X50 and ASUS ZenWiFi BD4; check the connection instructions for the exact version.

Do I need a permit or registration for ordinary home Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a permit to use Wi-Fi at home if you use the designated frequencies and comply with the conditions of use. Licence-exempt use of frequencies doesn’t require notification or registration. Choose equipment that meets the applicable requirements for the EU market. This doesn’t automatically mean that every use of non-standard settings or versions is permitted.