Who is this choice relevant to?

Listener with a slow download spot

You want to find out whether the internet connection, router position or Wi-Fi signal where you download is causing the problem. The Consumers’ Association recommends running a speed test using a network cable.

Household with old and new devices

You want to keep phones, laptops and other devices connected at the same time. So compare the Wi-Fi standards and bands your devices support with the router’s specifications, as outlined by TP-Link and ASUS.

Resident with weak Wi-Fi in several rooms

You need Wi-Fi in more than one place and are considering adding an access point or setting up a mesh system. The Consumers’ Association and TP-Link highlight factors such as placement and the connection between Wi-Fi points.

What should you look for when choosing?

Start by finding out where the connection is struggling. Then decide whether you need one Wi-Fi point or coverage across several rooms.

Improve your existing setup first

Choose this if: you’re not yet sure whether the router is causing slow downloads. Compare a wired test with Wi-Fi where you download, and try moving the router.

Bear in mind: this could save you from buying new equipment, but it won’t fix a problem with your internet connection.

One router or access point

Choose this if: your connection is good and one suitable access point reaches the rooms you use. Also check that access point mode is compatible with your provider’s device.

Bear in mind: a quoted radio speed doesn’t guarantee Wi-Fi coverage through walls.

Additional access point or mesh system

Choose this if: measurements show weak Wi-Fi in several places where you need it.

Bear in mind: extra points need space and power. A wired connection may require cabling, and coverage depends on where you place them.

What to consider What should you check? Who is it relevant to?
Wi-Fi where you download First run a wired speed test, then check the Wi-Fi signal where you download. If that particular spot matters, you’ll want to know whether the problem is with your internet connection or the Wi-Fi. Around 31% of consumers prioritise a reliable connection where they download.
Different devices Compare the 2.4 and 5GHz bands, Wi-Fi standards and security settings supported by your router and devices. If you want to keep using older and newer devices at the same time, check what each device supports. Around 31% of consumers give compatibility and simultaneous connections top priority.
Coverage across several rooms Take measurements in the places that matter, and check where an additional point could go and whether an Ethernet cable is an option. If you need Wi-Fi in different parts of your home, placement and any cabling will matter. Around 23% of consumers focus mainly on coverage across several rooms.
Connection and management Check your provider’s settings, the right router or access point mode, firmware updates and the CE marking on the specific device. If you want to connect and manage your own equipment, settings and updates are part of the decision. Around 15% of consumers prioritise a suitable, manageable home network of their own.

Common buying mistakes

  • Assuming the Wi-Fi speed on the box is your download speed

    Your internet connection and your wireless connection are two different things. A wired speed test can help you work out where the slowdown is happening; obstacles can weaken Wi-Fi.

    First test using a network cable, then check the Wi-Fi where you download.

  • Choosing a mesh system without space for the extra points

    A mesh system uses multiple points. They can be connected by cable if you can run one; a wireless extra point still needs to be placed somewhere suitable.

    Decide where the points can go and whether cabling is possible before choosing how many units to buy.

    Multiple units need extra space and power sockets. A wired setup may also involve running cables.

  • Assuming a standalone router replaces your provider’s modem

    You can also connect a router behind an existing modem. The right connection and settings depend on how your network is set up.

    Check whether you’re replacing the modem or adding a router or access point, and ask your provider for the settings you need if necessary.

Brands worth comparing

TP-Link

The Archer AX55 is a standalone dual-band router, while the Deco X50 is a mesh system. The right option depends on the Wi-Fi measurements in the places you use.

  • TP-Link lists Wi-Fi 6 and OFDMA for the Archer AX55, and optional Ethernet backhaul for the Deco X50.
  • These model specifications can’t predict download speeds in your home. Check the Archer AX55 hardware version, and work out how many Deco X50 units you need.

ASUS

The RT-AX58U is worth comparing if you’re looking for a single dual-band router with different operating modes.

  • ASUS lists router and access point modes, plus support for Wi-Fi 6 and older Wi-Fi standards.
  • The specifications distinguish between hardware versions V1 and V2 for the processor. Check the exact version; the listed features don’t guarantee coverage in a particular home.

FRITZ!

FRITZ! says the FRITZ!Box 4060 is designed to connect behind an existing modem. It may be worth considering if you also need mesh or telephony features.

  • FRITZ! lists one 2.5-gigabit WAN port and three gigabit LAN ports.
  • Check whether you’ll still need a modem. Telephony and smart home features aren’t essential for downloading an audiobook.

Joybuy product options

This selection of Joybuy products includes mesh systems, a standalone access point and a standalone router. Choose based on your measured Wi-Fi needs, the connections available and the devices you use at home.

TP-Link Deco E4 mesh system, 3-pack, dual-band Wi-Fi 5

TP-Link Deco E4, 3-pack, dual-band Wi-Fi 5

A mesh system with three units to consider if your measurements show that you need several Wi-Fi points.

Supports 2.4 and 5GHz bands and Wi-Fi 5 (802.11ac). The listed Ethernet ports support speeds of up to 100 Mbps.

Joybuy
Ubiquiti UniFi AP U7 Long-Range Wi-Fi access point

Ubiquiti UniFi AP U7 Long-Range

A standalone access point to consider if you want to add an extra Wi-Fi point to your existing network setup.

The description lists a 2.5-gigabit Ethernet uplink, PoE+ power and management through the UniFi Network platform. Check that you have compatible PoE+ power.

Joybuy
ASUS RT-AX52 AX1800 dual-band Wi-Fi 6 router

ASUS RT-AX52 AX1800 Wi-Fi 6 router

A standalone dual-band router to compare if one Wi-Fi point suits your measured needs.

The product description lists 2.4 and 5GHz bands, AiMesh expansion, OFDMA and MU-MIMO.

Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

A mesh system with three units to consider if your measurements show that you need extra Wi-Fi points at home.

The product description lists 2.4 and 5GHz bands, Wi-Fi 6 (802.11ax), OFDMA, MU-MIMO and three gigabit Ethernet ports per unit.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

A dual-band mesh router to compare if a mesh setup suits your measured Wi-Fi needs.

The product title lists dual-band Wi-Fi and Wi-Fi 7.

Joybuy

Frequently asked questions

Should you buy a new router straight away if your audiobook downloads are slow?

No. First test the connection using a network cable, then compare it with the Wi-Fi signal where you download. The Consumers’ Association also recommends checking the router’s position and whether your provider can help.

Can you use your own router with your Dutch internet provider?

According to ACM ConsuWijzer, you’re free to choose your router, but you need to connect the equipment correctly to your provider’s network. Ask your provider for the settings you need if you want to replace the existing equipment.

How do you maintain your own router?

Check how firmware updates are provided for your exact hardware version, and enable automatic updates if available. VeiligInternetten also recommends changing the default login details.

What should you look for in a router’s CE marking?

According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the market in the European Union must meet the relevant requirements and carry a CE marking. Check the marking on the specific device; information about a different model or hardware version doesn’t confirm that it does.

What can you do if your router breaks sooner than expected?

According to ACM ConsuWijzer, in the Netherlands you’re entitled to a product that works as long as you could reasonably expect it to. If a product breaks sooner than expected during normal use, the seller must offer an appropriate free solution; there is no fixed statutory guarantee period of exactly two years.