Which solution is right for you?

Home worker with one room that has a weak signal

You want to send or view family videos from your home office and mainly need a solution for poor Wi-Fi coverage in one particular area.

Family sharing the network at the same time

You share videos while other people stream or work, and want to assess the connection in places where several devices are in use at once.

User with a network cable in the home office

You can connect your home office to your home network by cable and want to add Wi-Fi there without relying on a wireless repeater for the connection back to the router.

What should you look for when choosing?

Choose a setup based on the connection available where you work and the rooms that need Wi-Fi.

Standalone wireless repeater

Suitable when: one home office has poor coverage and there’s still a usable spot between the router and that room.

Consider: you don’t need a network cable, but the repeater still depends on its wireless connection to the router. The Consumers’ Association (Consumentenbond) recommends placing it somewhere it can still receive a strong enough signal.

Wired access point

Suitable when: there’s already a working network cable to your home office, or you can install one.

Consider: the cable replaces the wireless connection back to the router, but running and connecting it takes extra work. Check that the access point model supports access point mode; an Ethernet port alone doesn’t prove that it does.

Mesh with multiple Wi-Fi points

Suitable when: rooms or floors other than your home office need coverage too.

Consider: you’ll need several units, and their placement will still affect the connection between them. Check that the router and Wi-Fi points are compatible; more equipment may also use more electricity.

Concern What to look for when buying Who is this important for?
Coverage in the home office Compare the connection by the router, at a possible repeater location and in your home office. Check whether the device has setup assistance or a placement indicator. If the Wi-Fi in my home office is weak, I mainly want coverage there so I can share family videos. Around 36% of consumers prioritise coverage in one home office.
Using the network at the same time Work out how many rooms need coverage and check whether your existing router and devices support the mesh features you want. When other people at home stream or work at the same time, I want the connection to remain usable in several places. Around 29% of consumers prioritise simultaneous use by the family.
Video files on the home network Check that the device has both an Ethernet port and access point mode; test transfers between the devices you actually use. If I share large video files, I want to be able to use or install a cable to my home office. A wired connection is a priority for around 21% of consumers.
Setup and ongoing use Check the setup instructions, security options and available updates; consider how many devices will be drawing power continuously. If you value simple setup and low ongoing costs, you’ll want to know how much configuration and equipment the solution requires. Around 14% of consumers prioritise these points.

Common buying mistakes

  • Placing the repeater where the router signal is weakest

    The repeater needs a usable connection to the router itself. Placing it in the room with the weakest signal could leave the problem unresolved.

    Try a spot in between, then test the connection from your home office. Use the placement indicator or setup app if available.

  • Assuming the advertised Wi-Fi speed is the actual file transfer speed

    A product specification isn’t a measurement taken where you work. Distance and extra wireless connections can affect speed.

    Compare transfers under the same conditions, both by the router and through the Wi-Fi point you’ve chosen.

  • Confusing an Ethernet port with a wired connection to the router

    You can connect a computer to the repeater by cable while the repeater itself communicates with the router wirelessly.

    Check whether the device supports access point mode or a suitable LAN bridge, and how the port is used in that mode.

  • Choosing mesh without working out how many points you need and where to place them

    A larger system won’t automatically give you a better connection where you work; the connection between the Wi-Fi points matters too.

    First decide which rooms need coverage, then compare the placement and energy use of the setups you’ll need.

Brands to consider

TP-Link

The RE705X is worth considering for wireless coverage in one room or as an access point using existing cabling.

  • TP-Link says the RE705X has Wi-Fi 6, a gigabit port and access point mode.
  • OneMesh requires compatible TP-Link equipment. The stated radio speeds aren’t a measurement taken in your home office.

FRITZ!

The FRITZ!Repeater 1200 AX may be a good fit if you already have a FRITZ!Box, or if you’re connecting the repeater via LAN.

  • The manufacturer lists a gigabit LAN connection and compatibility with other routers.
  • The automatic transfer of Wi-Fi settings described applies when used with a FRITZ!Box; don’t assume it will work the same way with another router.

ASUS

The RP-AX58 is designed to work as a repeater or access point with an existing router; AiMesh is relevant within a compatible ASUS network.

  • ASUS lists both repeater and access point modes.
  • Wi-Fi 6 features require compatible devices. The manufacturer also notes that 160 MHz on 5 GHz may be restricted in some regions.

NETGEAR

The EAX15 is a Wi-Fi 6 extender option for a setup with an existing router and a wired device at the other end.

  • NETGEAR lists a gigabit port and a single Wi-Fi name.
  • The stated speed of up to 1,8 Gbit/s is a manufacturer specification, not a confirmed speed for sharing videos in your home office.

devolo

The WiFi 6 Repeater 3000 is worth considering if you want to choose between repeater mode and an access point connected to an existing network cable.

  • According to devolo, the model has a gigabit LAN connection and access point mode.
  • The mesh compatibility described applies to other devolo Wi-Fi products.

Joybuy products for mesh and access points

This selection includes mesh systems with multiple Wi-Fi points and one wired access point. Check that the cabling, device compatibility and features you need are right for your home network. Also check the CE marking on the specific device.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A good fit for a setup with several mesh points that can use a wired backhaul.

  • Wi-Fi 7 and tri-band
  • WAN/LAN ports on each unit
  • Set of 2 Deco points
View at Joybuy
ASUS ZenWiFi BD4 Dual-Band

ASUS ZenWiFi BD4 Dual-Band

A good fit for a mesh setup that can use a wired connection between points.

  • Wi-Fi 7, dual-band
  • Two 2.5 Gbps Ethernet ports
  • Wired backhaul listed
View at Joybuy
TP-Link Deco X50 3-Pack

TP-Link Deco X50 3-Pack

A good fit for a home network that needs several mesh points and where you may want to connect a device at the other end by cable.

  • Wi-Fi 6
  • Three gigabit Ethernet ports on each unit
  • Set of 3 mesh points
View at Joybuy
TP-Link Omada EAP653 Wireless Access Point

TP-Link Omada EAP653

A good fit for a home office where an Ethernet connection is available at the installation point.

  • Wi-Fi 6
  • Gigabit Ethernet port
  • PoE support
View at Joybuy
TP-Link Deco XE75 Tri-band Mesh Wi-Fi 6E, 3-pack

TP-Link Deco XE75 Tri-band Mesh Wi-Fi 6E, 3-pack

A good fit for a mesh setup with several points and the option to use an Ethernet connection to a unit.

  • Wi-Fi 6E and tri-band
  • Gigabit Ethernet ports on each unit
  • Set of 3 units
View at Joybuy

Frequently asked questions

Should you buy a Wi-Fi booster first if sharing video files is slow or unreliable?

No. First compare the connection by the router with the one in your home office, and consider placement and simultaneous network use. A repeater is mainly designed to solve a local coverage problem; it won’t fix an issue that also occurs right next to the router.

Where should you place a wireless repeater?

Place the repeater somewhere it can still receive a usable connection from the router, usually between the router and the room with poor coverage. If available, use a status light or setup app, then test the connection in your home office.

Is an Ethernet port enough to use a repeater as a wired access point?

No. Also check whether the model supports access point mode or a suitable LAN bridge. An Ethernet port may be intended only for connecting an end device.

What are your rights if a Wi-Fi booster bought online doesn’t work properly?

If a product is faulty, the seller is responsible for the applicable statutory guarantee; a manufacturer’s warranty doesn’t replace it. Online consumer purchases also usually come with a 14-day cooling-off period, subject to legal exceptions. This doesn’t guarantee that Wi-Fi will reach a particular speed in every home.

Can you use a Wi-Fi booster at home in the Netherlands, and what should you look out for?

You can use Wi-Fi at home without a licence if you follow the rules for the designated frequencies and their use. Radio equipment placed on the market in the Netherlands must meet the relevant European requirements; compliant equipment must carry the required CE marking. Check the marking on the specific device.