Who is this for?

Presenters who prioritise voice recording

You’re recording a product demonstration and want to keep the microphone close to your mouth and listen back to your recording.

Presenters recording directly to a computer

You want to record while seated, without a separate audio interface, and need to match the USB version and recording input to your computer.

Presenters with existing recording equipment

You use equipment such as a mixer or audio interface and need to match the microphone input, headphone output, cable and any power requirements.

What should you look for?

Wired USB headset

A good fit if: you want to record directly to a computer and a simple connection matters to you.

Bear in mind: you’ll need the right USB version and to select the headset as your recording input. A specification for calls isn’t an independent measure of voice-over quality.

Analogue headset for recording and monitoring

A good fit if: you want to record and listen back through the same headset, and have a compatible TRRS connection or separate microphone and headphone inputs.

Bear in mind: the supplied cable and any adapter. For an XLR connection to the RØDE NTH-100M, RØDE describes an adapter that supplies plug-in power.

Broadcast headset with separate connections

A good fit if: your recording equipment has separate, compatible inputs for the microphone and headphones.

Bear in mind: the Audio-Technica BPHS1 has a 3-pin XLR microphone connection and a 6.3 mm headphone connection; it doesn’t connect directly via USB.

First, compare your recording equipment with the headset’s connections. Then make a short test recording in the room where you’ll be recording your product demonstration.

What to consider What to look for when buying Who is this important for?
Voice recording Check whether the microphone boom is adjustable, and make a test recording to assess how your voice sounds and whether there are plosive sounds. If you want your voice to remain clear while recording, check the microphone’s position and listen back. Around 33% of consumers prioritise consistent voice recording.
Connection Check the available ports and the exact version; for XLR, also check what microphone power is required. If you want to record without extra connection steps, check that the plug fits your computer or recording equipment. Around 27% of consumers prioritise a direct connection to their own device.
Background noise Test the headset in your recording space and listen back to the microphone signal separately; noise isolation for your ears doesn’t prove that sounds other than your voice will be kept out of the recording. If you’re recording with background noise, you’ll want to know how much of it ends up in the recording. Around 20% of consumers give controlling background noise top priority.
Comfort Check the fit and adjustability; also see whether the cables or ear cushions can be replaced, if that matters for how you’ll use it. If you’re recording multiple takes, you’ll want to keep wearing the headset comfortably and position the microphone properly. Around 20% of consumers consider fit during repeated recordings their top priority.

Common pitfalls

  • Mistaking call noise reduction for proven voice-over quality

    Features described for calls aren’t an independent measure of how the microphone sounds when recording a product demonstration.

    Record a short script in the room where you’ll be speaking and listen back for your voice, plosive sounds and background noise before recording the full demonstration.

  • Mistaking a compatible plug for a working connection

    A microphone input may require a specific power supply as well as the right cable. The BPHS1 also has separate connections for the microphone and headphones.

    Check the inputs, outputs and power requirements of your entire recording setup before choosing a headset.

  • Mistaking a headworn microphone for a complete headset

    The Shure SM35 is a microphone worn on your head, not a pair of headphones with a built-in microphone.

    Before buying, decide whether you also want to listen through the same headset; if you choose a headworn microphone, arrange a separate way to monitor your recording.

Brands to consider

RØDE

The NTH-100M combines over-ear headphones with a detachable microphone for recording and monitoring.

  • RØDE says that the microphone and ear cushions are detachable.
  • The microphone uses the supplied TRRS cable. For an XLR microphone input, RØDE describes an adapter that supplies plug-in power.
  • The manufacturer’s descriptions of voice quality aren’t an independent comparison.

Audio-Technica

The BPHS1 is a broadcast headset for a recording setup with separate microphone and headphone connections.

  • The EU product specification lists an adjustable cardioid dynamic microphone, closed-back ear cups, and a replaceable cable and ear cushions.
  • The supplied cable ends in a 3-pin XLR connection for the microphone and a 6.3 mm connection for the headphones.
  • The BPHS1-XF4 is a separate version with a different plug; check the model before ordering.

Logitech

The H390 is a USB computer headset with a microphone boom and on-cable controls.

  • Logitech positions the H390 primarily for calls and lists a USB-A version.
  • The product page also shows a USB-C option; check which version you’re buying.
  • The manufacturer’s claim about background noise isn’t an independent assessment of a recorded product demonstration.

Jabra

The Evolve2 40 SE is a wired office headset with a microphone boom, available in versions including USB-A and USB-C.

  • Jabra lists three microphones for calls and passive isolation from the ear cushions.
  • According to the manual, not all mobile USB-C devices or apps support an audio connection to the headset.
  • Call performance isn’t the same as measured voice-over performance.

Shure

The SM35 is a headworn microphone designed to be used with a separate way to listen; it isn’t a pair of headphones with a microphone.

  • Shure recommends positioning the microphone at the corner of your mouth, not directly in front of it.
  • Check whether you need the TA4F or XLR version, and which connection and power supply are compatible.
  • According to the manual, the basic model is designed for use with a wireless bodypack.

Products at Joybuy

These products may suit anyone who wants to listen through headphones while recording a product demonstration, or is looking for a headset microphone for speech. Check that the connection and microphone function of each version are compatible with your recording device; specifications for call microphones don’t automatically predict how a voice-over will sound.

Sennheiser MOMENTUM 4 Wireless, black

Sennheiser MOMENTUM 4 Wireless, black

May suit you if you want to listen through headphones while recording; check separately whether the microphone will work with your recording setup.

The product description lists four microphones for calls, Bluetooth and a supplied 3.5mm audio cable for wired listening.

View at Joybuy
Razer Kraken V3 X headset, black

Razer Kraken V3 X, black

May suit you if you’re looking for a headset with a microphone for speech; make a test recording to assess how it sounds in your space.

The product description lists a cardioid HyperClear microphone. The stated weight is 285 grams.

View at Joybuy
Jabra Evolve2 75 headset

Jabra Evolve2 75

May suit you if you’re looking for a headset microphone for speech and the option of wired listening; check which connection is used for recording.

The product description lists eight microphones for calls and a USB-C cable for wired use.

View at Joybuy
Jabra Evolve2 75 USB-A MS Teams, black

Jabra Evolve2 75 USB-A MS Teams, black

May suit you if you’re looking for a USB-A version; check that this variant is compatible with your computer and recording software.

The title specifies the USB-A MS Teams version. The product description lists eight microphones for calls, Bluetooth and up to 36 hours of battery life.

View at Joybuy
Jabra Evolve2 55 wireless stereo headset

Jabra Evolve2 55 wireless stereo headset

May suit you if you’re looking for a headset with an adjustable microphone boom; check how the headset and chosen adapter work with your recording equipment.

The product description lists two microphones for speech, a flexible microphone boom, a Link 380 USB-C Bluetooth adapter and a USB-A cable. The stated weight is 130 grams.

View at Joybuy

Frequently asked questions

Can I connect a broadcast headset directly to a USB port?

Not using only the listed BPHS1 connections: this version has a 3-pin XLR plug for the microphone and a 6.3 mm plug for the headphones. Check that your recording equipment has compatible connections for both, and don’t confuse the BPHS1 with the BPHS1-XF4.

How should you position the microphone boom for a test recording?

Follow the manual for your chosen model and listen back to the recording before recording the full demonstration. Shure recommends positioning the SM35 at the corner of your mouth; Logitech recommends positioning the H390 boom level with your mouth.

What warranty and returns rules apply to a headset in the Netherlands?

When you buy as a consumer, the product must meet reasonable expectations; if there’s a fault, the seller is your point of contact. According to the Dutch government, the Netherlands has no fixed statutory warranty period of two years. When buying online from a business, you’ll often have a 14-day cooling-off period, with some exceptions; check the terms for your specific purchase.

What should you look for when choosing a wireless headset?

Check that the headset and the specific version are compatible with your recording equipment, and that you can use the microphone with your recording software. According to the Dutch Authority for Digital Infrastructure, radio equipment placed on the EU market must meet the applicable requirements, including CE marking; this doesn’t prove that a particular headset will sound right for your recording.