Newsreader at a fixed recording position
You want to record speech and monitor the incoming audio through headphones. A closed-back broadcast headset with a positionable microphone may suit this set-up.
For a fixed recording position, a wired broadcast headset is a practical choice if you want to record your voice while monitoring through headphones. A separate head-worn microphone is a better fit if you already have suitable headphones. Before buying, check that the headset fits comfortably for a full take and that the microphone, headphones, cable and recorder are compatible. If you want to record wirelessly, also check the frequency requirements at your recording location.
You want to record speech and monitor the incoming audio through headphones. A closed-back broadcast headset with a positionable microphone may suit this set-up.
You wear the headset for extended periods. So, pay attention to the fit, ear pads and how easily you can position the microphone. Product descriptions cannot guarantee that a headset will feel comfortable for you.
You already have a recorder, interface or headphones and are looking for a microphone or headset that will work with them. If you’re recording wirelessly, the available frequencies at your location also need to be suitable.
Suitable for: a fixed news desk where you want to speak and monitor with one headset.
Bear in mind: connections may be separate. For example, the Audio-Technica BPHS1 has an XLR connection for the microphone and a 6.3 mm connection for the headphones.
Suitable for: a recording device with a compatible combined headset connection.
Bear in mind: check that your recorder supports both the microphone and headphones through that connection. RØDE specifies the supplied TRRS cable for the RØDE NTH-100M.
Suitable for: you already have headphones for monitoring and only need a microphone that moves with your head.
Bear in mind: a separate microphone does not provide headphone monitoring. The Shure SM35-TQG is designed for compatible Shure bodypacks.
Suitable for: you need to move around while recording and have a compatible microphone, transmitter and receiver system.
Bear in mind: available frequencies vary by location, and some bands require a licence.
For long news recordings, the key considerations are microphone position, fit, connections and whether you need to move around.
| Consideration | What to check before buying | Who is this most relevant to? |
|---|---|---|
| Clear speech recording | Compare the microphone’s polar pattern and boom adjustability. Make a test recording at your usual speaking distance. | I want my spoken bulletin to be clear, with the microphone consistently pointing towards my voice. Around 36% of consumers prioritise clear speech recording. |
| Comfort during long takes | If possible, wear the headset for an extended period and check for pressure points, warmth and whether the microphone stays in position. | When I record a long take, I want the headset to stay comfortable and not keep shifting. Around 29% of consumers give long-term wearing comfort top priority. |
| Compatibility with your equipment | Check the microphone and headphone connections, the cables required and what is included with the exact model. | I want to connect my headset to my recorder or interface without having to work out which connections I need afterwards. Around 21% of consumers make compatibility with their existing equipment their top priority. |
| Freedom of movement | Decide whether you really need to leave your usual position while recording. For wireless use, check compatibility and local frequency requirements. | When I need to move around during a bulletin, I don’t want to be tied to a fixed microphone position. Around 14% of consumers prioritise freedom of movement. |
Headsets may have separate connections for the microphone and headphones, or use a combined connection. A plug that fits physically does not necessarily mean both signals will work with your device.
Compare the connections on your recorder or interface with those on the exact headset model, and check which cables you need.
You may need an additional cable, splitter or compatible interface, which means extra equipment and preparation.
A separate microphone, such as the Shure SM35, does not provide headphones for monitoring your recording.
Decide whether you already have suitable headphones and check which connection is required for the microphone model you choose.
You may also need headphones. For wired use, Shure specifies an RPM626 preamp for the SM35-TQG.
The Dutch Authority for Digital Infrastructure (RDI) warns that not all UHF frequencies are available at every location in the Netherlands. Some frequency bands require a licence.
Before use, check the requirements for your chosen frequency and its availability at the specific recording location.
Audio-Technica describes the BPHS1 as a wired stereo broadcast headset, including for news broadcasting.
The NTH-100M combines over-ear headphones with a detachable microphone, making it suitable for applications including media production.
The HMD 26 is a wired, closed-back on-ear headset for professional broadcast applications.
The DT 297 PV MK II is a closed-back broadcast headset with a cardioid condenser microphone.
The SM35 is a separate head-worn microphone for anyone who already has a dedicated monitoring set-up.
The selection below consists of headsets with microphones. For news recordings, focus on whether the connection is compatible, whether you can monitor while recording and whether the headset stays comfortable for a full take.
Image unavailable
A headset option to consider if your set-up is compatible with the USB-A MS Teams version. Check that you can use it for monitoring with your recording device.
Image unavailable
This wireless stereo headset may suit you if you’re considering a wireless set-up. Check that it connects to your recording equipment and allows monitoring while recording.
Image unavailable
This mono version is an option to compare if you’re looking for a headset for speech recording. Check that the USB-A connection and monitoring are suitable for your recorder or computer.
Image unavailable
A wired stereo headset to consider for a fixed set-up. Check whether the 3.5 mm connection or USB controller is compatible with your recording equipment.
The product information lists a 0.95 m cable, so bear in mind the distance to your recording position.
Image unavailable
This wired headset is worth considering if you want a microphone and headphones in one model. Decide for yourself whether it fits comfortably for a full take.
The listed 3.5 mm connection may require a splitter if your equipment has separate audio connections.
Check the microphone and headphone connections on your recorder or interface. Audio-Technica lists an XLR plug for the microphone and a 6.3 mm plug for the headphones on the BPHS1. For the NTH-100M microphone, RØDE specifies the supplied TRRS cable. Don’t rely on the shape of a single plug alone.
Adjust the microphone boom, make a test recording and check that the headset stays comfortable for the planned recording time. Audio-Technica lists a replaceable cable and ear pads for the BPHS1; fit and maintenance options may vary between models.
It depends on the model and your equipment. beyerdynamic states that the DT 297 PV MK II is supplied without a connection cable. For each model, check which cables are included and which connector and pin configuration you need.
Not for every frequency band. The Dutch Authority for Digital Infrastructure (RDI) publishes bands in which wireless microphones can be used without a licence, subject to the stated conditions. However, it warns that not all frequencies are available at every location. Other bands do require a licence, so check your chosen band and recording location.
No. The European Commission describes CE marking as the manufacturer’s declaration that the product meets the applicable product requirements. The RDI also sets conditions for radio frequencies and highlights that availability varies by location.