Who is this buying guide for?

Home worker with a wired headset

You also use your headset’s microphone for calls. So check that the audio device supports microphone input as well as sound playback.

Laptop user with a changing monitor set-up

You connect monitors or a dock and want to keep using your wired headphones. First, check that your laptop still uses the audio output you want after everything is connected.

Listener with a permanent desk set-up

You may be looking for an easy-to-reach volume control or connections for your headphones and active speakers. Also check that the required plugs and power supply suit your set-up.

What should you look for when buying?

First, check the audio output. Then consider whether you need a new connection, microphone support or extra amplification.

Your laptop’s existing output

Choose this if: your headphones already connect, but the sound switches to the wrong device when you connect a monitor or dock.

Bear in mind: this won’t give you a new connection or additional amplification. Microsoft Support and Apple Support explain how to select your preferred audio output device.

Compact USB DAC

Choose this if: you mainly want to listen and have a suitable USB data port spare; according to FiiO, the QX13 has USB-C and 3.5mm and 4.4mm outputs.

Bear in mind: the DAC will use a USB port, and you shouldn’t assume it supports a microphone unless this is explicitly stated in the specifications.

USB headset adapter

Choose this if: you want to use your wired headset’s microphone during calls. Creative specifies that the Sound Blaster PLAY! 4 has a four-pole CTIA connection and supports microphone input.

Bear in mind: the connection and software features you need must be compatible with your headset and operating system.

Desktop DAC with headphone amplifier

Choose this if: you need specific headphone or line outputs, or a physical volume control, at a permanent desk set-up.

Bear in mind: connections and power requirements vary by model. FiiO lists a separate DC 12V/2A power supply for the K11; the iFi uno uses USB-C for audio and power.

Consideration What to check before buying Who should consider this?
Audio output Once your monitors are connected, select your preferred audio output in Windows or macOS; Microsoft Support and Apple Support explain how to do this. If no sound comes through my headphones after I connect my monitors, I want to check the output before buying anything. Around 31% of consumers rank audio routing as their top buying priority.
Headset microphone Check explicitly that the device supports microphone input and that it is compatible with your headset plug. For work calls, I want my wired headset’s microphone to keep working through the connection I choose. Around 25% of consumers give microphone support their highest priority.
Ports and plugs Make a note of which USB data port is free and compare it with the device’s input; also check your headphone plug. If my laptop, dock and headphones have different connections, I want to know in advance whether they’ll work together. Around 25% of consumers prioritise connectivity.
Amplification and controls Decide whether your current output is underpowered and whether you need a volume control, line output or separate power supply. Only compare power ratings for the same load and output. At a permanent desk set-up, I want to know whether I need extra amplification or direct volume control. Around 19% of consumers put amplification or desktop features first.

Common buying mistakes

  • Buying an amplifier when the wrong audio output is selected

    Connecting monitors or USB audio equipment can make several output devices available. An additional amplifier won’t automatically change which output your laptop is using.

    First, test the selected audio output, then check it again after connecting your monitors or dock.

  • Assuming a compatible headset plug means the microphone will work

    A headphone output that accepts a headset plug doesn’t, by itself, prove that it can pick up sound from the headset’s microphone.

    Check that the model explicitly supports microphone input and that its connection is compatible with the headset standard you use.

    If the microphone doesn’t work, you may still need a different adapter for calls.

  • Assuming the highest power rating proves an amplifier is right for you

    FiiO gives power ratings for the K11 under specific conditions, including the load and output. These figures alone don’t tell you whether your existing headphones need extra amplification.

    First, check whether your current laptop output is underpowered, and only compare specifications for the same load and output.

  • Overlooking a desktop model’s power or connection requirements

    Power requirements vary by device: FiiO lists a separate DC 12V/2A power supply for the K11, while the iFi uno receives audio and power via USB-C.

    Before buying, check that you have the required port and, where applicable, a spare mains socket at your desk.

Brands to consider

The features mentioned apply to the specific models below and aren’t a general recommendation for every product from that brand.

Creative

The Creative Sound Blaster PLAY! 4 is designed for USB audio and calls using a compatible wired headset.

  • Creative specifies a four-pole CTIA connection and microphone input; according to Creative, the model supports headphones with an impedance of 16–150 Ω.
  • Check that your headset and the required software are compatible. Call features don’t guarantee that it will work with every laptop or headset.

FiiO

The portable QX13 and desktop K11 DAC/amplifier offer different outputs and power options.

  • FiiO lists 3.5mm and 4.4mm outputs for the QX13. The K11 has 6.35mm, 4.4mm and RCA connections, among others.
  • According to FiiO, the K11 requires a separate DC 12V/2A power supply. Its performance figures are model-specific measurements and don’t automatically predict an audible improvement with your headphones.

iFi audio

The iFi uno is a compact desktop DAC/amplifier with USB-C for audio and power, a volume control, a 3.5mm headphone output and an RCA line output.

  • The iFi audio manual lists TRS and TRRS plugs for the headphone output.
  • The manual doesn’t specify that the device picks up sound from a headset microphone. For use with a PC, the manual says that drivers need to be downloaded.

Topping

The Topping DX5 II is a more feature-rich desktop model, with various headphone outputs and settings.

  • Topping’s official support documentation explains, among other things, how to select inputs and outputs.
  • Topping warns against using adapters that convert balanced outputs to single-ended. The extra features don’t automatically make this model necessary for a laptop with two monitors.

Joybuy products

Related products coming soon.

Frequently asked questions

Why is there no sound through my headphones after I connect two monitors?

First, check which audio output device is selected. Microsoft Support recommends choosing your preferred output when several are available; on a Mac, you can select it in System Settings under Sound. Apple Support also explains that when you use an external monitor, a different audio device may be active from the one you expect.

Do I always need a headphone amplifier when using two monitors?

No. Start by checking the audio output, then see whether your laptop’s output is actually missing a connection or feature. An amplifier won’t fix the wrong output being selected; extra hardware is only relevant if you need a compatible connection, microphone support, amplification or desktop controls.

Will my wired headset’s microphone work with any USB DAC?

No, don’t assume so unless the model’s specifications say that it will. Check separately whether the device supports microphone input and is compatible with your headset; Creative specifies a four-pole CTIA connection and microphone input for the Sound Blaster PLAY! 4.

What should I check before connecting a DAC or amplifier?

Check that your laptop has a suitable USB data port free, that your headphone plug fits the output and whether the device needs a separate power supply. The iFi uno manual says that drivers need to be downloaded for use with a PC.