Which option is right for you?

Listener with a full extension lead

Listening from a computer or compatible phone, and don’t want to use a separate mains adapter? First check whether USB handles both audio and power on the model you’re considering. The manuals and specifications for iFi audio and FiiO explain how this connection works for each model and operating mode.

Listener with demanding headphones

Match the plug and power rating to the exact output you plan to use. FiiO lists different figures for the KA13 depending on the output and operating mode, so a peak figure won’t necessarily apply to every connection.

Mobile lossless listener

If you switch between a phone and computer, compare USB power with a model that uses its battery in certain modes. FiiO lists different power sources for the BTR15 depending on the mode; the battery will also need charging.

What should you look for when choosing?

Start with the power source: this quickly tells you whether the device needs an extra socket. Then check that the connections and lossless signal path work with your source and headphones.

What to consider What to look for when buying Who is this most important for?
Power without an extra socket Check the manual for the exact model to see which input supplies power and whether this applies in the listening mode you use. If I don’t have a spare socket, I want to know whether my USB source will power the device while I’m listening. Around 36% of consumers mainly want to avoid using an extra mains socket.
Connection and power output Compare the plug and power rating for the same output, load and operating mode. I want an output that suits my headphones, and I don’t want to rely on a maximum figure that applies to a different connection. Around 29% of consumers mainly want to match the connection and power output.
Lossless signal path Check the music service or files, playback settings, USB compatibility of the source and the DAC’s supported formats. If I want to listen in lossless quality, I want to make sure the source settings and wired connection are right. Around 21% of consumers mainly want to check the lossless playback path.
Mobile use and charging Check the power source and battery life for each mode, as well as the available USB port and headphone plug. I switch between a phone and computer and want to know when the battery is being used and when I’ll need to charge it. Around 14% of consumers mainly want to switch between these devices.

Common pitfalls

  • Comparing maximum power without checking the test conditions

    FiiO lists different power figures for the KA13’s 3.5mm and 4.4mm outputs, and for desktop mode with and without the feature enabled. So a single maximum figure won’t tell you what to expect from every connection.

    Compare the specification for the output, load and mode you’ll actually use.

  • Assuming every USB DAC works without an extra socket

    According to the specifications, USB on the FiiO K11 is for data transfer; the device requires DC 12 V/2 A power. So its USB connection doesn’t mean you can do without a separate power supply.

    Check the audio input and power requirements separately for the exact model, and see whether you can free up a socket for the mains adapter.

    A separate mains adapter can take up an extra socket.

  • Confusing ‘lossless’ on the amplifier with lossless playback

    Your source’s settings and connection matter too. Apple says that Apple Music on iPhone and iPad requires an external DAC for tracks with a sample rate above 48 kHz.

    Check the entire signal path, rather than buying based only on a higher DAC specification.

  • Assuming a manufacturer’s warranty is the same as your full legal guarantee

    According to ACM ConsuWijzer, the retailer remains responsible if a product doesn’t meet what you could reasonably expect during normal use. A manufacturer’s warranty doesn’t replace your legal rights.

    Keep your proof of purchase and contact the retailer if there’s a fault. Your rights will depend on the circumstances of the fault.

Relevant brands to consider

FiiO

The KA13, BTR15 and K11 are different options to compare in terms of power and connections.

  • FiiO specifies power by output and desktop mode for the KA13, and power source by operating mode for the BTR15.
  • The K11 requires DC 12 V/2 A. These model specifications don’t determine which model will sound best with every pair of headphones.

iFi audio

The GO link Max is a compact USB DAC for wired headphones, with 3.5mm and 4.4mm outputs.

  • The quick-start guide identifies USB-C as both the power and audio input.
  • Before relying on product claims about sound or power, check that the connection and output suit your source and headphones.

Fosi Audio

The DS2 is a USB-C dongle with 3.5mm and 4.4mm outputs.

  • Fosi lists PCM support up to 32 bit/384 kHz.
  • Check the connection, relevant specifications and power source for your setup. A general claim about driving headphones doesn’t replace these checks.

AudioQuest

The DragonFly Cobalt is a USB DAC, preamplifier and headphone amplifier for use with a compatible computer or mobile device.

  • AudioQuest lists support up to 24 bit/96 kHz and includes a USB-C extension cable.
  • For iOS devices with Lightning, AudioQuest specifies a separate Apple adapter. Claims of improved sound quality aren’t an independent assessment.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Do I always need an external DAC for lossless Apple Music?

No, not for every track. Apple says Apple Music on iPhone and iPad requires a wired connection and the lossless setting to be enabled. According to Apple, an external DAC is needed for tracks with a sample rate above 48 kHz. This applies to this service and these devices, not as a general limit for all music sources.

How can I connect an amplifier without an extra mains adapter?

Check the manual for the exact model. According to iFi audio, USB-C on the GO link Max is both the power and audio input. The power source for the FiiO BTR15 varies by mode: in PC mode, it draws power from the computer; in PHONE mode, it uses its internal battery.

What should I look for in a battery-powered headphone amplifier?

Factor in charging and check the battery life for the mode you use. FiiO quotes around 3 hours in PHONE mode for the BTR15 and says this model doesn’t support fast charging; this information won’t necessarily apply to other models.

What are my rights when buying online in the Netherlands?

For a standard online consumer purchase, you generally have 14 days from delivery to change your mind, subject to legal exceptions. You also have the legal right to a product that meets what you could reasonably expect. ACM ConsuWijzer explains that there isn’t a general fixed two-year guarantee period.

Should I check for a CE mark on an electronic device?

Yes. Check the product and seller information, especially if you’re buying from outside the EU. The Dutch government says that electronic devices placed on the EU market must have a CE mark. A mark on its own doesn’t confirm the identity or safety of a specific online offer.