Listening from a laptop
If you listen to lossless music over a wired connection, first check the digital signal path and your music source settings. Apple Support explains the connection options and requirements for Apple Music.
For lossless music from a computer, a compact USB DAC with a headphone amplifier is a straightforward option. If you already have a suitable analogue DAC, a separate amplifier may be all you need. Then choose based on the space available on your desk, your headphone connection and the output figures at the relevant impedance. A higher supported sample rate doesn’t, by itself, prove that you’ll hear an improvement.
If you listen to lossless music over a wired connection, first check the digital signal path and your music source settings. Apple Support explains the connection options and requirements for Apple Music.
If your desk is small, compare a USB dongle with a desktop device, and allow for the power supply, cables and access to the controls. For example, FiiO’s product specifications give the dimensions of both the K11 and KA13.
If you already have a DAC with a suitable analogue output, you could consider a separate analogue amplifier rather than another DAC/amplifier combination. JDS Labs describes the Atom Amp 2’s analogue inputs.
Choose this option if: your computer is the digital source and you want one device with physical controls on your desk.
Bear in mind: you’ll need room for the device and its power supply. According to FiiO, the K11 measures 147 × 133 × 32,3 mm and uses a separate 12V/2A power supply.
Choose this option if: a compact design and compatible USB and headphone connections are your priorities.
Bear in mind: output figures can vary between normal and desktop modes. A dongle won’t necessarily offer the same physical connections as a desktop model.
Choose this option if: you already have a DAC or another source with a suitable analogue output.
Bear in mind: you’ll also need a DAC for a digital USB source. Check that the power supply for the specific version is suitable for use in the Netherlands.
For lossless listening from a computer with wired headphones at a small desk, the main factors are the signal path, available space, headphone connection and equipment you already own.
| Consideration | What to look for when buying | Who should consider this? |
|---|---|---|
| Lossless signal path | Check your music service’s lossless setting, the wired signal path and whether the device has a USB audio input or only an analogue input. | If I want to play lossless music from my computer, I want to know whether the digital signal reaches the DAC correctly. Around 36% of consumers say the digital signal path is their top priority. |
| Space, power and controls | Measure the space you have, including plugs and cable bends. Compare the dimensions of the units and check what power supply the specific version needs. | If I have limited desk space, I want to fit the power supply and cables without making the controls awkward to use. Around 29% of consumers prioritise a compact set-up. |
| Connection and power | Check your headphones’ plug, impedance and sensitivity. Compare output power only at the same impedance, output and measurement conditions; start at a low volume. | If I connect my wired headphones, I want a suitable output and enough amplification for my model. Around 21% of consumers say connection and power are their top priority. |
| Making use of an existing DAC | Check whether your DAC has a suitable analogue output and whether the separate amplifier’s power supply is suitable for use in the Netherlands. | If I already own a DAC, I want to keep using it rather than add a second DAC unnecessarily. Around 14% of consumers prioritise making use of their existing audio equipment. |
An amplifier can’t restore information that’s missing from the signal it receives. Apple Support explains the specific settings and wired connection options for Apple Music.
First check your music service settings and the signal path from your source to your headphones.
The output, impedance and operating mode determine the conditions under which a quoted figure applies. For example, FiiO lists different figures for the KA13 with desktop mode on and off.
Only compare figures at the same load and output. If you use a gain setting, JDS Labs recommends choosing the lowest setting you need.
The JDS Labs Atom Amp 2 has analogue inputs. You’ll also need a DAC for a digital USB source. The sales page we viewed describes a US 110–120V version, not a confirmed Dutch power supply option.
Check both the input and the power supply for the exact model before choosing it.
The K11 we looked at is a desktop USB DAC/amplifier, while the KA13 is a compact USB dongle for a different space and connection set-up.
The ZEN DAC 3 combines a USB-C DAC with headphone outputs and analogue outputs for a set-up with active speakers.
The Atom Amp 2 we looked at is an analogue headphone amplifier for anyone who already has a suitable DAC or another analogue source.
AudioQuest describes the DragonFly Cobalt as a USB DAC, preamplifier and headphone amplifier in dongle form.
No, an external DAC isn’t always necessary. Apple Support also describes wired lossless listening without requiring an external DAC in every case. However, Apple does specify one for the iPhone and iPad connection route described for tracks above 48 kHz. Check the requirements for your device and music service. An analogue headphone amplifier isn’t a DAC.
Connect a suitable analogue output from your DAC to the RCA or 3,5mm input on the Atom Amp 2. JDS Labs recommends using the lowest gain setting you need, and switching to high gain only if you can’t reach your desired volume on low gain. Turn the volume down before connecting your headphones.
It depends on the model and version. FiiO specifies a 12V/2A DC power supply for the K11. The iFi ZEN DAC 3 manual says it can be powered via USB or with a separate 5V power supply, which isn’t included. Before buying, check which power supply and cables come with the specific version.
According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, although there are exceptions. Your statutory guarantee is separate from any manufacturer’s warranty: if a product doesn’t do what you could reasonably expect during normal use, contact the seller.
The Dutch government explains that a shop may take back an old, similar electrical appliance when you buy a new one as a private customer, including when you buy online. The government also lists collection points and your local recycling centre.