Who is a headphone amplifier for a shared table suitable for?

Listening to one recording together

If you’re sharing the same recording with others but each want to set your own listening volume, Behringer and Mackie describe distribution amplifiers with separate level controls for each output.

Comparing different recordings

If listeners need different sources or monitor mixes, the audio interface and its routing must support separate signal paths. Focusrite describes a setup with separate interface outputs for different cue mixes.

Listening with different headphones

If the headphones at the table have different plugs or need to be driven differently, check the connections and compatibility with the amplifier. ART lists two connection sizes per channel for the HeadAmp 4; the WHO notes that both listening volume and listening time contribute to sound exposure.

What should you look for in a headphone amplifier?

Distribution amplifier for one stereo source

Choose this if: everyone needs to hear the same recording at the same time and set their own volume.

Bear in mind: the volume controls change the level, not the recording or mix for each listener.

Separate monitor mixes

Choose this if: listeners need different recordings or cue mixes at the same time.

Bear in mind: the interface must provide suitable outputs and routing; capabilities vary by model.

What to consider What to look for Who is this important for?
Sharing one recording Check how many outputs can be controlled separately and which source connects to the input. If I’m listening to the same recording with others, I want to be able to set my own volume. Around 36% of consumers prioritise sharing one recording.
Separate sources or mixes Decide whether every listener needs to hear the same source, then check the interface and software outputs and routing. If we’re comparing different recordings or monitor mixes, I need separate signal paths rather than just extra volume controls. Around 29% of consumers prioritise separate sources or mixes.
Connections and listening volume Check that the plugs match the connections and start at a low volume; also bear listening time in mind. If there are different headphones at the table, I want suitable connections and control over the level. Around 21% of consumers prioritise compatibility and controlled volume.
Power and cables Check the required power source, the connections and which cables or adapters are included with that version. For a permanent or portable setup, I want to know how to power and connect the amplifier without overlooking anything. Around 14% of consumers start by considering power and connections.

Common mistakes when choosing

  • Assuming four volume controls mean four separate recordings

    A distribution amplifier with one stereo input sends the same source to multiple listeners. An individual volume control doesn’t select a different recording.

    Before choosing, work out which source each listener needs to hear. Separate mixes require suitable interface outputs and routing, which may also mean extra equipment or setup.

  • Confusing the number of connections with the number of independently controlled channels

    ART says the HeadAmp 4 can connect up to eight pairs of headphones, but specifies four channels, each with its own volume control. So two connections on one channel aren’t the same as two independent level controls.

    Count both the connections and the separate volume controls, and check which headphones you want to use at the same time.

  • Assuming a higher volume means a recording sounds better

    According to the WHO, both listening volume and listening time contribute to sound exposure.

    Compare at controlled listening levels that are as similar as possible, and take breaks.

Brands to consider for shared listening

Behringer

Behringer describes the HA400 as a compact distribution amplifier for up to four listeners sharing the same mix.

  • The manufacturer lists four individually adjustable volume controls and a supplied 12V adapter.
  • Four volume settings don’t provide four separate sources or mixes.

Mackie

Mackie describes the HM-4 as a distribution amplifier that sends one stereo signal to up to four pairs of headphones.

  • The manufacturer lists separate level controls and a supplied adapter.
  • Separate source routing is needed to give each listener a different mix.

ART Pro Audio

ART describes the HeadAmp 4 as suitable for shared setups with different headphone plugs.

  • ART lists four independently controlled channels, each with 6,35mm and 3,5mm connections that can be used at the same time.
  • The manufacturer specifies an output impedance of 47 Ω per output. Check that it’s suitable for the headphones you plan to use; the number of connections doesn’t mean there are just as many independent volume channels.

PreSonus

According to PreSonus, the HP4 combines four headphone outputs with monitor outputs for a more extensive desktop setup.

  • The European product page lists balanced line inputs and outputs, a level control for each headphone channel, a mono sum switch and a mute for the monitor outputs.
  • The version described is the 220–240V EU version; check the power supply for the exact version.

Zoom

Zoom describes the ZHA-4 as a portable four-way distribution amplifier for one stereo source.

  • Zoom lists four 3,5mm outputs, each with a volume control and mute, plus power from two AA batteries or external USB-C.
  • Being able to mute an output isn’t the same as sending a different recording to it.

Headphone amplifiers on Joybuy

Related products coming soon.

Frequently asked questions about headphone amplifiers

Can everyone hear a different recording with a four-channel headphone amplifier?

Not if the amplifier simply splits one stereo source across four outputs. Separate signal paths and suitable routing are needed to give each listener a different recording or cue mix; check what your audio interface can do.

How do I connect a headphone distribution amplifier without starting at an unsafe volume?

Connect the suitable stereo output from your source to the input, and check that the plugs fit the connections. Start with the individual volume controls set low; according to the WHO, hearing risks are linked to both listening volume and listening time.

What costs and rights should I consider after buying online?

Check that you have the necessary cables and a suitable power supply. According to the Dutch Government, in many cases you have a 14-day cooling-off period for online purchases from a business; this is separate from your rights if a product is faulty. The Dutch Government also notes that the Netherlands has no fixed statutory guarantee period for every product, and that you should contact the seller to resolve problems with a product.

Is a CE marking on its own enough to show that an amplifier is suitable?

No. According to Business.gov.nl, electrical and electronic equipment must meet the applicable European product safety and EMC requirements; whether CE marking is mandatory depends on the product group. Check the information for the specific product version.