Listener comparing recordings
You line up recordings on two screens and want to listen to them at a similar volume through one fixed audio output. Microsoft Support explains how to select your preferred audio output in Windows.
Using two screens doesn’t, in itself, call for a special headphone amplifier. Route both playback applications to the intended audio output and keep the volume consistent while you compare. Choose a USB DAC/amplifier for playback, an audio interface if you also record, or an analogue amplifier if you already have a suitable analogue source. Also check the connections, power supply and applicable product safety requirements for the specific model.
You line up recordings on two screens and want to listen to them at a similar volume through one fixed audio output. Microsoft Support explains how to select your preferred audio output in Windows.
You compare previous recordings and also connect a microphone, instrument or other analogue source. The Focusrite Scarlett 2i2 4th Gen and MOTU M2 have recording inputs and a headphone output.
You already have a suitable analogue audio source and are looking for a separate headphone amplifier without buying another DAC. According to iFi, the iFi ZEN CAN 3 is a fully analogue amplifier.
Choose based on your signal path and how you’ll use it: your screens don’t determine which audio output your computer uses. First check your system’s output settings and, where necessary, those of each playback application.
| Consideration | What to check | Who is this important for? |
|---|---|---|
| Comparing recordings fairly | Check that both applications use the same selected audio output and keep the volume consistent. | If I’m listening to recordings side by side on two screens, I want the same output and the volume set to the same level; around 36% of consumers give their playback workflow top priority. |
| Connection and headphones | Check the plug type and specifications for the output you’ll actually use, including the load and test conditions. | If you mainly want to know whether your headphones will connect and be driven effectively, choose accordingly; around 29% of consumers prioritise connectivity and driving power. |
| Recording your own audio | Check the number and type of inputs, the monitoring function and how many headphone outputs there are. | If I want to record vocals, instruments or other sources as well as listen back, I need recording inputs; around 21% of consumers make recording features their top priority. |
| Space and power | Check whether the device is USB-powered or needs a separate power supply, and whether you already have a suitable analogue source. | For consumers who want a compact workspace or move between workspaces, the equipment required matters; around 14% prioritise footprint and portability. |
The computer, and sometimes each application, determines the selected output. An extra amplifier won’t automatically fix an incorrect software output selection.
First check your system output and the audio settings in your playback applications. Then work out which connections you actually need.
The Focusrite Scarlett 2i2 4th Gen and MOTU M2 each have one headphone output. On the RME ADI-2 DAC FS, the headphone output and IEM output aren’t necessarily two identical, independently comparable headphone channels.
Decide whether you’ll listen to recordings one after another with one pair of headphones, or whether two listeners genuinely need separate listening paths.
If two listeners need separate mixes, you may need additional monitoring equipment.
The stated figures for the FiiO K11 and QX13 vary depending on the output, load or power mode. A power figure on its own therefore isn’t enough to assess the connection.
Compare the specification for the output you want to use with your headphones’ load and the relevant test conditions.
According to iFi, the iFi ZEN CAN 3 is a fully analogue amplifier. You’ll also need a suitable source or DAC to connect it to a digital computer output.
Before buying, map out the connections from your computer to your headphones and check what equipment you already have.
The K11 and QX13 offer different options: a desktop DAC/amplifier and a compact USB DAC/amplifier. They aren’t interchangeable models.
The Scarlett 2i2 4th Gen suits a workflow that combines comparing recordings with making new microphone or instrument recordings.
The M2 is an audio interface for anyone who wants to record sources as well as play audio.
The ZEN CAN 3 is a separate analogue headphone amplifier for use with an existing audio source.
The ADI-2 DAC FS is a more advanced option for listeners looking for digital inputs and adjustable playback.
No, not just because you’re using two screens. Select the intended audio output device on your computer, and check the separate output and volume settings too if your applications are configured differently.
Connect the interface to your computer via USB, plug your headphones into the headphone output and connect your recording source to a suitable input. The headphone output on the Focusrite Scarlett 2i2 4th Gen is designed for a 6.35mm TRS plug; direct monitoring is a separate, adjustable feature.
Use the same output for both recordings and keep the volume and any EQ settings consistent. Start at a low volume: according to the World Health Organization, the risk to your hearing depends on both sound level and listening duration.
According to the Dutch government, there is no fixed term for the statutory guarantee in the Netherlands: the product must meet what you can reasonably expect, and the seller is your point of contact if something goes wrong. For qualifying distance sales, you generally have a 14-day cooling-off period; check the terms of the specific purchase.
The Dutch government states that electronic devices placed on the EU market must meet the applicable safety requirements and carry a CE marking. Check this for the specific model and the power supply included; a listing in a product overview doesn’t confirm it on its own.