Who is this for?

Listeners with wired headphones

You want to know whether your computer’s output is good enough, and which connection and volume controls suit your headphones.

Listeners with an adjustable desk

You want to keep extra equipment to a minimum and make sure your cables have enough slack when you adjust the desk. A USB-powered device could suit a setup without a separate power adapter.

Listeners with multiple audio sources

You want to switch between compatible sources at the same workstation, or connect both headphones and active speakers.

What should you look for when buying?

What to consider What should you look for? Who should consider this?
Connections and control Check that the plug fits the output and that the gain and volume controls are suitable for your headphones. If I want to connect my wired headphones without needing adapters and adjust the volume easily, I’ll start by checking the connections and controls. Around 36% of consumers share this priority.
Lossless playback chain Check your music source, playback settings, digital output and wired connection. Apple Support recommends an external DAC for certain Apple devices and content above 48 kHz. If I want to make sure my source, settings and connection support lossless playback, I’ll check the whole chain, not just the DAC. Around 29% of consumers put this first.
Space, power and cables Check the dimensions, power connection and cable slack when the desk is at both its lowest and highest positions. If I adjust my desk regularly, I want my equipment and cables to have room to move with it. Around 21% of consumers are mainly looking for a tidy, adjustable workspace.
Extra sources and speakers Check that the inputs suit your sources and whether the line output is fixed or variable. If I want to use other sources or active speakers as well as my headphones, I’ll look for the right connections and volume controls. Around 14% of consumers consider this the most important factor.

Pitfalls to avoid when buying

  • Assuming a high sample rate means better sound

    A high kHz figure won’t make up for missing lossless files or incorrect playback settings. A DAC’s higher stated input sample rate doesn’t, on its own, prove that the music is lossless or will sound noticeably better.

    Before buying an extra DAC, check your source, music service settings and existing wired output.

    Buying a DAC when your existing connection is good enough could add an unnecessary extra device to your workspace.

  • Assuming every desktop DAC is USB-powered

    Power requirements vary by model. FiiO specifies 12 V/2 A for the K11; Topping’s manual says to use a USB Y-cable with the DX1 II if the source doesn’t supply enough power. The cable isn’t included.

    Check the power requirements for the exact model and make sure there’s enough room for plugs and cables when the desk is at its lowest and highest positions.

    Depending on your setup, you may need a separate adapter or an extra cable.

  • Treating a fixed line output like a volume-controlled speaker output

    With a fixed output, the DAC’s volume knob won’t control the volume of connected speakers. According to its manual, the iFi ZEN DAC 3 has a fixed or variable analogue output.

    Before connecting your speakers, check which mode is selected and where you’ll control their volume. Start at a low volume after connecting them.

Brands to consider

FiiO

The K11 is a desktop DAC and headphone amplifier with several digital inputs; the QX13 offers a more compact USB option.

  • FiiO lists a volume knob, 6.35 mm and 4.4 mm headphone outputs, and an RCA line output for the K11.
  • The K11 requires 12 V/2 A. The K11’s features don’t automatically apply to the QX13.

iFi audio

The ZEN DAC 3 is a desktop DAC and amplifier for a single USB source, with outputs for headphones and active speakers.

  • The manual lists 6.35 mm and 4.4 mm headphone outputs, PowerMatch, and a fixed or variable analogue output.
  • If you’re using it with a dock, check that the USB source supplies enough power. These features alone say nothing about how it will sound with your headphones.

Topping

The DX1 II offers a compact, USB-powered DAC and amplifier option for a computer.

  • The official quick-start guide lists 3.5 mm and 4.4 mm headphone sockets.
  • Topping recommends a USB Y-cable if the source doesn’t supply enough power; it isn’t included.

Fosi Audio

According to the manufacturer, the ZH3 is designed for a desktop setup with headphones and active speakers.

  • Fosi lists 6.35 mm and 4.4 mm headphone outputs, as well as RCA and XLR outputs.
  • The manufacturer’s performance and sound claims aren’t independent measurements made with your headphones.

Creative

The Sound Blaster X4 combines a USB DAC and headphone amplifier with connections for a microphone and speakers.

  • Creative lists a volume knob, USB-C power and a switch between speakers and headphones.
  • The extra voice and surround features aren’t essential for playing lossless music.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need a separate DAC for lossless music?

No, not always. First check your wired connection, music source and playback settings. Apple Support recommends an external DAC for certain Apple devices and content above 48 kHz; this isn’t a general requirement for every lossless setup.

How do I connect a USB DAC to my computer and headphones?

Use the correct USB and headphone connections, select the DAC as your audio output and start at a low volume. Check the power requirements for the exact model; according to Topping, the DX1 II may need an extra USB Y-cable if the source doesn’t supply enough power.

Can I use the same DAC with active speakers too?

Yes, if the DAC has a suitable line output that connects to the speaker input. According to its manual, the iFi ZEN DAC 3 has a fixed or variable analogue output. Decide in advance where you’ll control the speaker volume.

What are my rights when buying online in the Netherlands?

ACM ConsuWijzer states that you generally have 14 days to change your mind from the date of delivery, subject to applicable exceptions. Products must also meet what you can reasonably expect from them. If a product develops a fault through normal use, the seller may have to put it right under the legal guarantee.

What product safety rules apply to electrical equipment sold in the Netherlands?

Electrical and electronic equipment must comply with the applicable European product rules. Where CE marking is required, the manufacturer must also meet the related conformity obligations. Check the specific model and power supply; CE marking isn’t an assessment of sound quality.