Who might benefit from a headphone amplifier?

Listeners with limited desk space

If you want to use wired headphones without adding another box and power supply to your desk, compare USB dongles. Creative describes the PLAY! 4 as a USB solution, while iFi lists the uno as compact and USB-powered.

Listeners looking for more output power

If your headphones don’t reach a sufficient volume, compare the output power with the impedance and sensitivity of your particular model in mind. Shure notes that these specifications are relevant when assessing headphones and the audio output they’re paired with.

People using a wired headset for calls

If you also want to use your headset’s microphone with your laptop, check that the solution you choose supports microphone input and has the right type of connector. Creative specifies a four-pole CTIA connection and microphone input for the PLAY! 4.

What should you look for when choosing one?

Start by asking whether your laptop’s headphone output is falling short. Then compare the space and connections you actually need.

What to consider What should you check? Who is this important for?
Space, cables and power Compare the dimensions, space for cables, USB port used and any separate power adapter for the exact model. If I want to use my wired headphones on a small desk, I want to keep extra clutter to a minimum. Around 40% of consumers give saving space their top priority.
Sufficient volume Check your headphones’ impedance and sensitivity, then compare power ratings for the same output, load and test conditions. If my current connection doesn’t provide enough volume, I want to know whether another output will suit my headphones. Around 30% of consumers prioritise having enough power to drive their headphones.
Headset microphone Check the connector type, explicit microphone support and any software or operating system requirements. If I want to make calls using my wired headset, the microphone needs to work too, not just the audio. Around 20% of consumers make microphone support their main reason for buying.
Additional outputs and controls Check whether you need a volume control or a particular connection. On these devices, RCA is a line output, not an additional headphone output. If I want to control or expand my setup, having the right connections matters more than getting the smallest possible box. Around 10% of consumers give controls and additional outputs their top priority.

Common mistakes when choosing

  • Comparing only the highest power rating

    Power ratings can vary depending on the output and load. Your headphones’ sensitivity also matters.

    Compare the same output at the same load and check the test conditions. First, work out whether your laptop’s output is falling short for the way you use it.

  • Assuming every headphone output also passes through the microphone

    A connection designed for audio playback won’t necessarily support a wired headset’s microphone.

    Before buying, check that the exact model supports microphone input and is compatible with your headset’s connector type.

  • Looking only at the device’s dimensions

    A separate power supply and the cables you need take up space too. FiiO says the K11 uses an external 12V/2A power supply, while the iFi uno receives audio and power via USB-C.

    Remember to allow space for the adapter and cables, and to leave USB ports free when planning your desk setup.

Brands to consider

Creative

The Sound Blaster PLAY! 4 is a small USB solution worth comparing if you want to use a wired headset with your laptop.

  • For model SB1860, Creative specifies a USB-C connection, a four-pole CTIA headset output, microphone input and support for headphones rated at 16–150 Ω.
  • The stated impedance range alone doesn’t prove that the output will suit every pair of headphones. SmartComms is a Creative software feature, not a proven improvement for every calling situation.

iFi audio

The uno is a USB-powered desktop DAC/amplifier with physical controls and several types of output.

  • The manual lists dimensions of 88 × 81 × 26 mm, a 3.5mm headphone output and RCA line outputs.
  • According to iFi, drivers are required for PC use. Check the requirements for your operating system. The power ratings are manufacturer figures.

FiiO

The K11 is a desktop option with several headphone outputs and a separate power supply; the KA11 is a separate dongle option.

  • FiiO specifies USB-C input, 6.35mm and 4.4mm headphone outputs, and a separate 12V/2A power supply for the K11.
  • The K11 needs space for the device, adapter and cables. The KA11 has a different connection and power arrangement, so don’t treat the two models as interchangeable versions.

Products at Joybuy

Related products coming soon.

Frequently asked questions

How do I connect a USB headphone amplifier to my laptop?

First, check which USB port and power arrangement the device needs. Connect your headphones to the designated output and, if necessary, select the USB device as your audio output. FiiO explains how to select the KA11, while the iFi uno manual notes that a driver is required for PC use. Start with the volume low.

Will my wired headset’s microphone work with any DAC or amplifier?

No. Not every headphone output supports a microphone as well. Check explicitly that the exact model supports microphone input and is compatible with your headset’s connector type. Creative specifies a four-pole CTIA connection and microphone input for the PLAY! 4 (SB1860).

What cooling-off period and guarantee apply to an online purchase in the Netherlands?

According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions. The seller must also offer an appropriate solution if a product doesn’t perform as you could reasonably expect under normal use. A manufacturer’s guarantee doesn’t replace these statutory rights.

What should I look for in relation to Dutch product regulations?

Electrical and electronic devices sold in the Netherlands are subject to applicable European product regulations. Business.gov.nl explains that the manufacturer must assess the applicable conformity requirements, prepare the required documentation and affix the CE marking where required. CE is not a sound quality mark, so check the documentation for the specific model.