If you simply want to stop sound coming from your laptop speakers, first try your wired headphones with the laptop’s existing headphone socket. You may not need a separate amplifier. A USB DAC/amplifier could be a good option if the laptop’s analogue output is causing interference, or if you need different connections or a physical volume control. It won’t block out ambient noise, and there’s no evidence that the displays on the models discussed here are easy to read beside a bright window.
Who might need a headphone amplifier?
Listeners who want to avoid using their laptop speakers
If you want to listen privately with wired headphones, first check whether your laptop’s existing headphone socket is up to the job. If you want to block out noise in the room, the headphones themselves matter too, not just the amplification.
Listeners with a noisy laptop output
If you want to bypass the analogue headphone socket, consider a digital USB connection. Check that it’s compatible with your laptop’s port and operating system, and that the plug fits your headphones.
Listeners with a regular spot at their desk
An easily accessible volume control or extra inputs might be useful, but remember to allow room for the device, cables and power supply. Check that the controls and display work for your setup; a description of the display doesn’t prove it will be easy to read beside a bright window.
What should you look for?
These points assume you’ll be listening through wired headphones connected to a laptop. First decide whether you need an extra device, then check the connections, controls and placement.
| What to consider |
What should you check? |
Who is this important for? |
| Avoiding laptop speakers |
First try your wired headphones with the existing socket. If you want to block out noise in the room, also consider the fit or noise isolation of your headphones. |
If I simply want to listen privately through my headphones, I want to know whether the laptop’s existing output is good enough before buying extra equipment. Around 36% of consumers prioritise avoiding laptop speakers. |
| Digital USB audio connection |
Check the USB port, the cable you’ll need, compatibility and whether the correct audio output is selected on your laptop. |
If the analogue output is noisy, I’m looking for a suitable digital connection that bypasses it. Around 29% of consumers are primarily concerned with an alternative laptop output. |
| Headphone connection |
Check that the plug type matches the output. Only compare power ratings when the output and load are the same, and start with the volume low. |
If I want to connect my existing headphones, the plug needs to fit and the specifications need to suit how I’ll use them. Around 21% of consumers focus mainly on connections and drive capability. |
| Controls and placement |
Allow room for the device, cables and power supply. Check that the controls are practical where you plan to listen. |
If I’m placing the device on my desk beside a bright window, I want to know whether it will be easy to use and position. Around 14% of consumers focus mainly on controls and placement. |
Buying pitfalls
-
Buying an amplifier when you only want to avoid using your laptop speakers
You may not need a separate amplifier if your wired headphones work with the laptop’s existing headphone socket.
Try that socket first and check that your laptop is using the headphones as its audio output.
-
Confusing an analogue amplifier with a USB DAC
An analogue amplifier doesn’t change the audio route from your laptop. If you want to bypass the laptop’s analogue output, you’ll need a suitable digital connection.
Before buying, check where the signal enters the device and whether it’s compatible with your laptop connection.
-
Assuming every output works with every pair of headphones
The headphone output needs to match the plug. A rating for a particular output type and load won’t necessarily apply to every pair of headphones.
Check the plug, output and test load against your own equipment, and start with the volume low.
-
Assuming a high-contrast display will be easy to read in sunlight
A description of the display won’t tell you how easy it is to read in the light beside your window.
Choose controls you can reach easily where you’ll be using the device, and don’t assume the display will be readable in direct sunlight.
Brands to consider
FiiO
The K11 is a desktop DAC/headphone amplifier for a fixed setup, with USB and additional digital inputs.
- According to FiiO, the K11 has a volume control, 6.35 mm and 4.4 mm headphone outputs, and RCA line outputs.
- The K11 uses an external 12V power supply. The manufacturer describes the display as high-contrast, but that doesn’t show how easy it is to read beside a bright window.
iFi audio
The ZEN DAC 3 is a desktop model with USB-C, while the GO link Max is a compact USB DAC/amplifier. They are different types of product.
- According to iFi, the ZEN DAC 3 has RCA line outputs, while the GO link Max has 3.5 mm and 4.4 mm headphone outputs.
- Compare the connections and cables needed for each model. The manufacturer’s claims about listening experience aren’t an independent comparison of these models.
Focusrite
The Scarlett Solo 4th Generation is an audio interface for anyone who wants to connect a microphone or instrument as well as listen to audio.
- Focusrite lists recording inputs and a separate headphone output. According to Focusrite’s specifications, the headphone output’s maximum power is 32 mW at 33 Ω.
- If you only want to avoid using your laptop speakers, don’t focus solely on the recording features.
Products for listening with headphones
Related products coming soon.
Frequently asked questions
Does a headphone amplifier also block out noise in the room?
No. An amplifier sends the audio signal to the connected headphones, but it doesn’t provide acoustic isolation. The World Health Organization recommends well-fitting noise-cancelling headphones in noisy environments to help prevent you from turning the volume up too quickly.
How do I set up a USB DAC once it’s connected?
Connect a compatible USB cable and your wired headphones, select the DAC as the audio output on your laptop, and start with the volume low. If you’re using the FiiO K11, check the external power supply too. Whether you need drivers depends on the model and operating system.
What are my rights when buying online in the Netherlands?
For a standard online consumer purchase, you generally have a statutory cooling-off period of up to 14 days after delivery, although exceptions apply. ACM ConsuWijzer also explains that if a product doesn’t do what you could reasonably expect during normal use, you have rights against the seller under the statutory guarantee.
Does an electronic device need CE marking to be sold in the Dutch market?
CE marking is required for products covered by EU rules that make the marking mandatory. The Dutch Government and the European Union explain these rules; the requirements depend on the specific product. Check which product rules apply to the exact model and version. CE marking is not an independent performance test.