Who is this guide for?

Listeners with demanding headphones

If your headphones have a particular connector or power requirement, you can compare these with the output and its stated power. Kieskeurig.nl lists power and headphone impedance as factors to consider; check the specifications for your own headphones.

Listeners with local hi-res files

If you play files from a computer, check that the computer, selected input and device support the format you’re using. Apple and manufacturers describe the capabilities of individual devices and inputs; these won’t necessarily apply to every computer or connection.

Listeners with an adjustable desk

If you adjust your desk regularly, check in advance that the controls will remain within reach and that the power supply and cables will be properly positioned at the highest setting. Models vary in their power supplies and connections, as the product information from FiiO and iFi audio shows.

What should you look for when buying?

Using your computer’s existing output

A good fit if: your wired headphones already work the way you want and your computer’s output supports your files.

Trade-off: you won’t add another device or cables to your desk, but the existing output may not offer the connection or power you need.

USB DAC with headphone amplifier

A good fit if: you want to play computer files over USB and are looking for a suitable headphone output or physical volume control.

Trade-off: the DAC and amplifier are combined in one device, but inputs, power supplies and headphone outputs vary between models.

Separate analogue headphone amplifier

A good fit if: you already have a DAC or another suitable analogue source and mainly want a different headphone output or volume control.

Trade-off: this amplifier doesn’t decode computer files itself, so your existing source or DAC remains part of the setup.

Factor to consider What should you check? Who should pay particular attention?
Headphone output and power Check that the output matches your headphone plug. Compare stated power only for the same output and load, and consider the usable volume range. If you use headphones with a particular connection or power requirement, you’ll want to know whether the combination is suitable. Around 31% of consumers prioritise headphone compatibility.
Files, source and input Compare your file formats with the support offered by the input you’ll actually use. Also check which audio output is selected on your computer. If your main priority is playing your own files through the intended computer and input, put source and file compatibility first. Around 31% of consumers cite this as their main concern when buying.
Power, controls and cables Check whether the device uses USB power or a separate power supply, and whether the controls are within reach. Make sure the cables have enough slack when the desk is at its highest setting. If you adjust your desk, you’ll want to be able to reach the controls and route cables without putting them under tension. Around 23% of consumers prioritise their desk setup.
Whether you need an extra device First assess whether your existing headphone output is already good enough. If you’re considering a separate amplifier, check whether you already have a suitable DAC or analogue source. If you don’t want to buy an unnecessary device or extra component, first check what your current setup can already do. Around 15% of consumers prioritise whether an extra device is needed.

Common buying mistakes

  • Assuming the highest hi-res figure means better sound

    A maximum specification doesn’t tell you which input you’re using, or prove that your computer’s output is inadequate. Supported formats can also vary between inputs.

    Start by checking your files, source, input and headphones. Then compare the specifications that apply to that particular input.

  • Buying an analogue amplifier when you need a USB DAC

    A separate analogue amplifier won’t play computer files on its own. If you don’t already have a suitable source or DAC, you’ll need an extra component to complete the setup.

    Map out the signal chain before you buy: file, computer or player, any DAC, amplifier and headphones.

  • Leaving power and cables until after you’ve set everything up

    A device with a separate power supply needs a power socket, and the cable route must remain practical when the desk is raised.

    Check the supplied power supply and route the cables so they don’t become taut when the desk is at its highest setting.

  • Assuming an overseas version is the same as a UK or Dutch one

    The JDS Labs Atom Amp 2 product page we reviewed lists a US version rated at 110–120V. The Dutch government also warns that purchases from outside the EU may incur VAT, import duties or other charges.

    Before choosing a model for use in the Netherlands, check the specific version, power supply, seller and applicable conformity information.

Relevant brands to consider

FiiO

The K11 and K11 R2R are desktop DAC/amplifiers with USB and multiple headphone outputs, worth comparing for a fixed computer setup.

  • FiiO lists a 6.35mm and 4.4mm output for the K11 R2R, as well as a separate 12V/2A power supply.
  • The stated format limits vary by digital input. These are manufacturer specifications, not independent listening test results.

iFi audio

The ZEN DAC 3 combines a USB DAC and headphone amplifier; the ZEN CAN 3 is an analogue amplifier for use with an existing source.

  • According to iFi audio, the ZEN DAC 3 has USB-C, 6.35mm and 4.4mm connections, and can run on USB power or a suitable separate 5V power supply.
  • The ZEN CAN 3 doesn’t decode computer files itself. The manufacturer’s power and sound claims here are not independently verified comparison results.

JDS Labs

The Atom Amp 2 is an example of a separate analogue amplifier for anyone who already has a suitable DAC or analogue source.

  • JDS Labs lists analogue inputs, two headphone connections and a preamp output.
  • The product page we reviewed lists a US version rated at 110–120V and doesn’t confirm a suitable power supply for the Netherlands.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Can an analogue headphone amplifier play hi-res files from USB on its own?

No. An analogue headphone amplifier can’t play these files on its own. You need a source that can play the file and convert the signal; the iFi ZEN CAN 3 is an example of an amplifier used alongside a source or DAC.

What should you check if a USB DAC has no sound or shows the wrong sample rate?

First check the selected audio output and input, the cable, playback software and computer settings. Apple explains how to set the sample rate in Audio MIDI Setup on compatible Macs; Topping provides separate steps for selecting the source and output on the DX3 Pro+.

How can you avoid listening too loudly during long work sessions?

Start at a low volume, especially when changing the gain. The World Health Organization stresses that safe listening time decreases as sound levels rise; 80 dB for up to 40 hours a week is one of its examples, not a measurement of your setup.

Which product safety rules are relevant when buying in the Netherlands?

Electrical and electronic equipment placed on the Dutch market must meet the applicable European requirements. The Dutch government’s Business.gov.nl states that, where CE marking requirements apply, the manufacturer must affix the CE mark and draw up an EU declaration of conformity. A model name or hi-res label doesn’t prove compliance on its own.

Can you return an amplifier bought online if it isn’t suitable?

For a standard online consumer purchase, you generally have a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer lists some exceptions, so check the terms for your particular purchase.