Who is this relevant to?

Listener without a spare socket

You want to listen to hi-res files through wired headphones from a compatible computer or phone, without an extra mains adapter.

Mobile phone listener

You want to use wired headphones on the go and decide whether power from your phone, a built-in battery or a combination of the two suits each situation.

Listener with a fixed setup

You may want features such as volume control or extra audio outputs, and need to weigh these against USB power or the need for a mains adapter.

What should you look for when buying?

First, choose a power option that suits your source and available sockets. Then check file and source compatibility, the headphone connection and any extra connections you need.

What you’re looking for What should I check? Who is this important for?
No need for an extra socket Check whether the specific version receives audio and power via USB, or needs an adapter. If I don’t have a spare socket, I want to know whether my USB source can power the amplifier or whether it needs a battery. Around 33% of consumers prioritise avoiding an extra mains adapter.
Playing hi-res files Check file support for the exact version, as well as your player’s actual digital output settings. I want my files and player settings to match what the DAC receives, not just its maximum specification. Around 27% of consumers prioritise compatibility with their own files.
Connection and headphones Compare the plug and check power specifications for the same output, load and operating mode. If I want to use my existing headphones, the connection and relevant power rating need to be compatible. Around 20% of consumers start by checking the headphone connection and drive capability.
Controls and extra connections Check which inputs and outputs you need, where the controls are and what power supply is required. For my fixed setup, I want to know whether I can connect other audio sources or equipment, and whether the controls are within easy reach. Around 20% of consumers prioritise controls and additional connections.

Common pitfalls

  • Assuming a USB connection means no extra power is needed

    Power requirements vary by model and source. Topping warns that the DX1 II may not work properly with some phones because of limited power or compatibility. The FiiO K11 requires a separate 12V/2A power supply.

    Check the power requirements of both the device and the source before relying on a setup that doesn’t need a wall socket.

  • Comparing only the maximum hi-res rating

    The DAC may receive a different signal from the original file specification if the player resamples the audio.

    Check file support, your player’s settings and its actual digital output.

  • Comparing power ratings for different outputs as if they were the same

    FiiO lists different power ratings for the KA13’s 3.5mm and 4.4mm outputs, as well as its desktop mode. These ratings aren’t directly comparable.

    Compare the rating for the output, load and mode you’ll actually use, and check that it’s compatible with your headphone cable.

  • Assuming an older model is still a current buying option

    Qudelix says that the Qudelix-5K is discontinued and won’t be restocked.

    When comparing older battery-powered DACs, check whether the model is still available before considering it a current option.

Brands to consider

The models mentioned offer different power and connection options. These features apply to the specific versions listed and aren’t a general recommendation for the entire brand.

FiiO

Relevant models range from USB dongles to desktop devices with a separate power supply.

  • According to the official specifications, the KA13 has 3.5mm and 4.4mm outputs. The BTR15 uses a different power source depending on the mode.
  • The K11 requires DC 12 V/2 A and has no battery.

iFi audio

The GO link Max is a USB-C dongle, while the ZEN DAC 3 is designed for a fixed setup with extra outputs.

  • According to the manuals, the GO link Max is powered via USB. The ZEN DAC 3 can also be powered via USB and has line outputs.
  • A separate 5V power supply is an alternative for the ZEN DAC 3. Check that the headphone plug matches your cable.

Topping

The DX1 II is a USB-powered desktop DAC and headphone amplifier designed for use with a compatible computer.

  • According to Topping, USB carries both audio data and power to the DX1 II.
  • Topping warns that connecting the DX1 II to a phone may not work because of insufficient power or compatibility. This warning applies to the DX1 II.

Joybuy products

Related products coming soon.

Frequently asked questions

Does a DAC that supports 384 kHz guarantee that my file will play without conversion?

No. Check that the file and DAC are compatible, and what the player and operating system output. Topping explains that, with the DX1 II, resampling by the source can change the displayed sample rate.

What can I check if a USB-powered desktop model doesn’t work with my phone?

First, check whether your phone recognises USB audio and supplies enough power. Topping notes that phones vary in the power available and their USB compatibility with the DX1 II; using it with a computer may be more suitable. A separate power source may still take up a wall socket.

How can I avoid the volume being too high when connecting or switching settings?

Turn the volume down before changing the gain setting. The iFi ZEN DAC 3 manual warns that switching PowerMatch at high volume may damage your hearing or equipment.

What are my rights when buying online or if the product is faulty?

For a standard online consumer purchase, the Dutch government says you generally have 14 days to change your mind; check whether an exception applies to your purchase. If a product is faulty, the retailer is your point of contact and must resolve the problem or involve the manufacturer.

What rules apply to CE marking and disposing of an old device?

According to Your Europe, CE marking is only required for products covered by EU rules that specifically require it. The Dutch government also explains that when individuals buy a new, similar electrical device, they can return the old one to the retailer free of charge; this arrangement doesn’t apply to devices owned by businesses.