Who is this choice relevant to?

Comparing recordings

You want to compare versions using the same headphones without differences in playback volume dominating the comparison.

Using demanding headphones

Your current output may not deliver the usable volume you need. Check both the impedance and sensitivity of your wired headphones.

Listening at a bright workstation

You want to adjust the volume and reach the connections easily beside a bright window. The presence of a display or physical knob alone doesn’t tell you how easy the screen is to read in direct sunlight.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Comparing at the same volume Check whether your playback software offers perceived-loudness normalisation, and always use the same headphones and amplifier settings. If you want to compare recordings fairly, you’ll want to avoid a louder file affecting the comparison. Around 36% of consumers prioritise a comparable playback level.
Suitable amplification Make a note of your headphones’ plug, impedance and sensitivity. Compare output specifications only for the connection and load you actually use. If you’re unsure whether your current output provides enough usable volume, look for an amplifier that suits your headphones. Around 29% of consumers prioritise headphone compatibility.
Controls beside the window Check where the buttons and connections are, and whether you can identify the settings you need at your workstation without relying on the display being readable in direct sunlight. If you want to adjust the volume and reach the connections beside a bright window, their position matters. Around 21% of consumers make practical controls at a bright workstation their top priority.
Sources and setup Check whether your source provides USB audio, optical, coaxial or analogue output, and whether you also want to make recordings. Bear the available power supply in mind. If you want to connect several sources, move your setup or record audio, focus on the connections you actually need. Around 14% of consumers prioritise flexibility for sources or setup.

Common buying mistakes

  • Assuming a louder recording automatically sounds better

    A difference in playback level can affect your judgement. An amplifier won’t automatically make two differently mastered files sound equally loud.

    Compare recordings using the same playback route, and match their perceived loudness using a consistent method before judging differences in the content. Audacity describes perceived-loudness normalisation as a different approach from peak-level normalisation; Roon describes volume levelling that keeps playback volume more consistent between source files.

  • Assuming the highest power figure applies to every pair of headphones

    FiiO lists different power ratings for the K11 and KA13 depending on the output and load; the KA13’s desktop mode also makes a difference. So a power figure alone doesn’t tell you what to expect with your headphones.

    Compare the specifications for the connection you use and the relevant load, and check your headphones’ sensitivity too.

  • Mistaking an analogue amplifier for a USB DAC

    The iFi ZEN CAN 3 documentation describes analogue inputs. A device with these connections won’t automatically replace a missing DAC or digital input.

    Before you buy, map out the connection from your audio source to any DAC, amplifier and headphones. Also check which cables, power supply and headphone plug you’ll need.

  • Relying on a display or tone control without checking it

    The presence of a display doesn’t prove that you’ll be able to read it easily beside a bright window. Changing tone settings can also affect your listening comparison.

    Check the controls where you plan to use the device, and keep the gain and any tone settings consistent while comparing.

Brands to consider

FiiO

FiiO offers two different setup options here: the stationary K11 and the compact USB-C DAC/headphone amplifier KA13. They’re not interchangeable versions of the same product.

  • According to FiiO, the K11 has a volume knob, 6,35mm and 4,4mm headphone outputs, and an external 12 V/2 A power supply. The K11 doesn’t have a battery.
  • According to FiiO, the KA13 has USB-C, 3,5mm and 4,4mm outputs, and physical controls. Its stated power output varies by connection, load and desktop mode.
  • These specifications don’t tell you whether the display will be easy to read beside your window. Compare power ratings for the connection and headphones you use.

iFi audio

The ZEN DAC 3 combines a USB DAC with a headphone amplifier; the ZEN CAN 3 is a separate analogue amplifier for use with a suitable analogue source.

  • The iFi ZEN DAC 3 manual describes a USB-C audio input, two headphone outputs, and a fixed or variable line output. It also mentions switchable gain.
  • The iFi ZEN CAN 3 quick-start guide lists RCA, 3,5mm and 4,4mm inputs.
  • When comparing recordings, keep the ZEN DAC 3’s XBass+ setting consistent or switch it off. According to its documentation, the ZEN CAN 3 has analogue inputs and no built-in USB DAC.

Focusrite

The Scarlett 2i2 4th Gen is worth considering if you want to record audio as well as listen to existing files.

  • Focusrite lists recording inputs and separate controls for headphone and speaker levels.
  • For this model, Focusrite specifies a headphone output power of 32 mW at 33 Ω and an output impedance of 50 Ω. Compare these figures with your headphones; you don’t need recording inputs if you only play existing files.

RME

The ADI-2 DAC FS is designed for those who want digital processing and separate headphone and IEM outputs.

  • RME’s manual mentions an IPS display and several controls.
  • The manual doesn’t provide a measured guarantee of readability in direct sunlight. Keep processing settings consistent when making fair comparisons between recordings.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to buy a headphone amplifier to compare two existing recordings?

Not just for that comparison. Start by using the same headphones and playback route, and keep the perceived volume comparable. Then check whether your current output falls short in terms of the connection or usable volume.

How do I connect an amplifier without an unexpectedly loud sound?

Follow the connection instructions for your exact model and start with the volume turned down. The iFi ZEN DAC 3 manual warns you to lower the volume before switching PowerMatch; this instruction applies to that model.

How can I make sure long listening sessions are responsible?

Limit prolonged listening at high levels. The World Health Organization explains that safe listening time decreases as sound levels rise. Its example of a maximum of 40 hours per week at 80 dB is general health advice, not a guarantee that a particular volume setting on a specific device is safe.

What cooling-off period and guarantee apply to an online purchase in the Netherlands?

ACM ConsuWijzer states that online purchases generally come with a statutory cooling-off period that ends 14 days after delivery; check the exceptions that apply to your specific purchase. Your statutory guarantee is separate from any manufacturer’s guarantee: if a product is faulty, the seller is responsible for providing an appropriate solution.

Is CE marking relevant for a headphone amplifier in the Netherlands?

Check which product rules apply to the exact device and the supplied power adapter. The Netherlands Enterprise Agency explains that requirements depend on the type of device; this general information doesn’t confirm that an individual product complies.