Who is this relevant to?

Listener at a bright desk

You usually listen to recordings in the same place and want to adjust the volume without relying on a display that may be difficult to read beside a window. FiiO and TOPPING document physical controls, but this doesn’t test how easy their displays are to read in light from a window.

Listener with demanding headphones

First, you want to check whether your existing source provides a usable volume. Then check which output matches your headphone plug. Manufacturer figures apply to the specified output and load, so only compare specifications that match the connection you’ll use.

Listener in different places

You also listen to recordings elsewhere using a laptop or phone, so you’re weighing up a device with its own battery against a small USB dongle. Check which USB connection and cable your source needs.

What should you look for?

Choose based on how you use your equipment day to day, your headphones and your playback source. A display or a single output figure isn’t enough to determine which model is right for you.

Keep using your existing headphone output

A good fit if: your source already drives your wired headphones at a comfortable, manageable volume and has a suitable connection.

The trade-off: you don’t add another device, power supply or cables, but you also don’t get extra inputs or a separate physical volume control.

Fixed DAC/headphone amplifier

A good fit if: you mainly listen at the same desk and need a physical volume control, a suitable headphone output or extra source inputs.

The trade-off: the device takes up desk space and needs power. A display specification doesn’t tell you how easy it is to read beside your window.

Portable DAC/amplifier with a battery

A good fit if: you regularly listen in different places and want a device with its own battery.

The trade-off: you’ll need to charge the device and check that the USB connection and headphone cable are compatible. iFi’s stated battery life of up to 12 hours is a manufacturer claim.

USB dongle with headphone amplification

A good fit if: compact storage and connection to a compatible USB source matter more to you than a fixed rotary control.

The trade-off: the dongle stays connected to your source and doesn’t offer the range of digital inputs found on a fixed DAC.

What to consider What to look for Who is this most relevant to?
Controls in daylight Check the position of the volume control and assess the display where you’ll be listening. When I listen beside a bright window, I want to adjust the volume without relying on the display. Around 31% of consumers give top priority to controls that are easy to use in daylight.
Driving your headphones Check the plug and compare the specification for the correct output and load; start at a low volume. I want to know whether my own headphones will be driven appropriately and whether the volume will remain manageable. Around 31% of consumers prioritise compatibility with their headphones.
Connecting to your playback source Check the output on your computer or player, the input on the device and which cable you need. If my downloaded files are played from a particular source, the connection needs to work with both that source and my headphones. Around 23% of consumers choose source and plug compatibility as their first consideration.
Portability and power Decide whether you want to use a fixed power supply, a rechargeable battery or a dongle connected to your source. I listen in different places and want to know whether I’ll need to charge a battery or leave the dongle connected to my source. Around 15% of consumers give portability top priority.

Common pitfalls when choosing

  • Comparing only the highest mW figure

    Power figures can vary by output and load. A higher figure for a different output won’t help if your headphones don’t connect to it.

    Compare figures for the same output and load as your headphones, and keep the listening volume manageable.

  • Assuming a display is easy to read beside a window

    A mention of a display or rotary control doesn’t tell you how easy the display will be to read in the light where you listen.

    If easy access to physical controls is your main priority, focus on that and assess the display and its position separately.

  • Assuming a USB dongle, battery-powered model and fixed DAC are interchangeable

    According to FiiO, the FiiO K11 has an external power supply and several digital inputs, while the iFi hip-dac 3 has a battery and the Fosi Audio DS2-2024 uses USB-C. These differences determine how you can connect your source and power the device.

    Before buying, check your source’s output, the power available and your headphone plug against the specifications for the exact model.

Brands to consider

FiiO

The FiiO K11 is a fixed DAC/headphone amplifier with several digital inputs. The KA13 is a separate, compact USB option.

  • According to FiiO, the K11 has a rotary control, three gain settings, 6.35mm and 4.4mm outputs, and no battery.
  • According to the manufacturer, the FiiO KA13 has volume buttons and 3.5mm and 4.4mm outputs.
  • These are different models: the KA13 doesn’t have the same range of inputs as the K11. The model specifications aren’t an independent listening test.

TOPPING

The TOPPING DX1 II is a fixed DAC/amplifier worth considering if on-device controls and a 3.5mm or 4.4mm headphone connection are important to you.

  • TOPPING’s manual lists a multifunction rotary control and a display.
  • These features don’t show how easy the display is to read beside a bright window, and they apply to the DX1 II, not every model from the brand.

iFi audio

The iFi hip-dac 3 is a battery-powered DAC/headphone amplifier for listening in different places.

  • According to iFi, the hip-dac 3 has USB-C and iEMatch for sensitive in-ear headphones.
  • The maximum battery life of 12 hours is a manufacturer claim. Remember to charge it and check that the cable you need is compatible.

Fosi Audio

The Fosi Audio DS2-2024 is a small USB-C DAC/amplifier for a laptop or another compatible USB source.

  • For this model, Fosi lists separate volume buttons and 3.5mm and 4.4mm outputs.
  • Check that you’re looking at the DS2-2024; these specifications don’t automatically apply to other Fosi amplifiers.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do I always need a separate amplifier for a downloaded concert recording?

No. First, check whether your current source drives your wired headphones at a comfortable, manageable volume and has the right connection. A separate DAC/amplifier may be useful if you need different connections, controls or amplification; the recording itself doesn’t require an extra device.

How do I connect a DAC/amplifier to play my recordings?

Play the files on your computer or another source, then connect its suitable output to the corresponding input on your chosen device. Next, connect your headphones to the right output and start at a low volume. According to FiiO, the FiiO K11 has USB, optical and coaxial inputs; the Fosi Audio DS2-2024 uses USB-C.

How can I listen to recordings repeatedly over a long period without risking my hearing?

Start at a low volume and limit prolonged exposure to loud sounds. The World Health Organization recommends a maximum of 40 hours per week at an average of 80 dB, and four hours per week at 90 dB. Without measuring it, the amplifier’s volume setting doesn’t tell you what sound level is reaching your ears.

What are my rights when buying online in the Netherlands?

For an ordinary product bought online, you generally have a statutory cooling-off period that ends 14 days after delivery; exceptions may apply. A product must also generally meet what you can reasonably expect from it under normal use, but there is no standard statutory warranty period. ACM ConsuWijzer explains the cooling-off period and statutory guarantee.

Can I use or share any concert recording I’ve downloaded?

No. Downloading from an illegal source is prohibited. According to the Dutch government, a permitted private copy is for personal use and must not be shared or made public. Check the source and whether you have permission to use the recording.