Who is this relevant to?

Listeners with limited desk space

You want PC audio and a headphone connection within easy reach, without a large stack of equipment. So, compare more than just the casing: leave room for plugs, cables and the power supply too. Fosi Audio specifies dimensions of 121 × 51 × 43 mm and USB-C power for the SK02; FiiO lists dimensions of 147 × 133 × 32,3 mm and a separate 12V/2A power supply for the K11.

Listeners who want to compare power carefully for their headphones

You want to check whether the amplifier is suitable for your headphones and the connection you use. Compare power ratings only when the output, load and measurement conditions are the same; FiiO specifies different figures for the K11’s 6,35mm and 4,4mm outputs.

Listeners with multiple audio sources

You may want to connect another digital source or active speakers as well as your PC. Check exactly which inputs and outputs you need: FiiO lists USB, optical and coaxial inputs, among others, and an RCA line output for the K11; according to its manual, the iFi ZEN DAC 3 has USB-C, headphone outputs and RCA outputs.

What should you look for?

Start by identifying the problem you want an extra device to solve. Then measure the space available and check that the connections and power supply are suitable for your PC and headphones.

What to consider What should you check? Who is this important for?
Desk space and cables Measure the space, allowing room for plugs and cable bends; also check whether the device needs a separate power supply. On a small desk, I want to leave enough room for cables and other things, not just the casing. Around 33% of consumers rank space and cables as their top priority.
Driving your headphones Compare the power output for the connection and load you’ll actually use. For the K11 at 32 Ω, FiiO specifies a minimum of 520 mW per channel via 6,35 mm and a minimum of 1400 mW per channel via 4,4 mm, both at THD+N <1%. For the SK02 at 32 Ω, Fosi Audio lists two different figures for the 4,4mm output: 1100 mW in the description and 755 mW in the specifications table. I want to know whether the output I choose is suitable for my headphones, rather than comparing power figures in isolation. Around 27% of consumers rank adequate power as their top priority.
Connections for your equipment Check the PC audio input, your headphone plug and whether you need a line output for active speakers. If I also want to connect other sources or speakers, the right inputs and outputs need to be available. Around 20% of consumers rank suitable connections as their top priority.
Whether you need an extra device First, try your current PC output to see whether it provides enough volume and control. Then decide what specific problem an amplifier should solve. If my current PC output works well, I don’t want an extra device on my desk without a clear reason. Around 20% of consumers rank necessity and cost as their top priority.

Common buying mistakes

  • Comparing power ratings for different outputs directly

    A power rating applies to the output, load and measurement conditions specified alongside it. For the K11 at 32 Ω, FiiO lists different power outputs for the 6,35mm and 4,4mm outputs.

    Check which output your headphones use, and only compare figures measured under the same conditions.

  • Assuming every USB connection carries PC audio

    According to JDS Labs, an analogue amplifier such as the JDS Labs Atom Amp 2 has analogue 3,5mm and RCA inputs, while the iFi ZEN DAC 3 accepts USB audio according to its manual.

    Check whether USB serves as an audio input and which audio output is actually available on your PC.

  • Measuring only the casing

    You’ll also need room for a power supply and connected cables. According to FiiO, the K11 uses a separate 12V/2A power supply; the Fosi Audio SK02 is powered via USB-C at 5V, according to Fosi Audio.

    Measure the space behind and beside the device too, including the cable route, and check where you can connect the power supply.

Brands and models to consider

Fosi Audio

The SK02 is a compact USB/optical DAC amplifier with 3,5mm and 4,4mm headphone outputs, designed for setups with limited desk space.

  • Fosi Audio specifies dimensions of 121 × 51 × 43 mm and 5V power via USB-C for the SK02.
  • Fosi Audio lists two different power ratings for the SK02’s 4,4mm output at 32 Ω on its product page. So, don’t use these figures to rank its power output.

FiiO

The K11 is a desktop DAC/amplifier with multiple digital inputs and an RCA line output, suited to a PC setup that needs extra connections.

  • FiiO lists USB, optical and coaxial inputs, headphone outputs and three gain settings.
  • FiiO lists dimensions of 147 × 133 × 32,3 mm and a separate 12V/2A power supply. Its power ratings differ depending on the headphone output.

iFi audio

According to iFi audio, the ZEN DAC 3 combines USB-C PC audio with headphone outputs and switchable line outputs, making it suitable for a setup that may include active speakers.

  • The iFi audio manual lists 6,35mm and 4,4mm headphone outputs, as well as RCA outputs with fixed or variable settings.
  • According to the manual, a separate DC power supply is not included. It also recommends turning the volume down before changing the gain setting.

Schiit Audio

The Fulla E is a USB DAC/amplifier with a separate microphone input, designed for desktop setups that also use a headset.

  • The Schiit Audio manual describes separate microphone and headphone connections, plus an optical input.
  • According to the manual, a headset with a single TRRS plug won’t work directly; you’ll need a suitable splitter.

Products on Joybuy

Related products coming soon.

Frequently asked questions

How do I connect a USB DAC/amplifier to my PC?

Connect the intended USB audio input to your PC and plug your headphones into the suitable output. If necessary, select the device as the sound output in your operating system. Check the power supply for the model you choose: FiiO specifies DC 12V/2A for the K11; according to its manual, the iFi ZEN DAC 3 can be powered via USB or with a separate 5V power supply.

Will every headphone cable fit a 4,4mm output?

No. Your headphone or cable plug needs to match the output. Check the wiring too, and don’t compare a power rating for 4,4 mm with one for a different output as if they were the same connection.

How can I avoid setting the volume too high?

Start at a low volume, especially before selecting a higher gain setting. The iFi ZEN DAC 3 manual gives this advice when changing the gain setting; Thuisarts advises keeping the volume at a safe level when listening to music, watching TV or playing games.

Do I always need a separate headphone amplifier for my PC?

No, not if your current headphone output provides enough volume and is easy to use. An external DAC/amplifier may be useful if you want a specific extra connection or volume control; first, work out what problem you want to solve.

Is a CE mark enough to assess an amplifier for use in the Netherlands?

Not on its own. The European Commission explains that CE marking is only required for products covered by EU rules that stipulate it, and that the manufacturer declares the product complies with the applicable rules. Check the power supply and product information for the specific model too.