Who is this choice relevant to?

Listener comparing recordings

Wants to assess small differences between existing files without variations in loudness skewing the comparison. The Audacity manual describes loudness normalisation for sources that need to sound equally loud; ITU-R Recommendation BS.1116-3 highlights the importance of controlled listening conditions.

User with hard-to-drive headphones

Wants to match the connection, adjustment range and specified power to their headphones. Manufacturers such as FiiO and Focusrite specify power at particular loads, so check the figures for the output you actually plan to use.

Recording or listening with others

May need recording inputs and monitoring, or several individually adjustable headphone outputs so you can listen to one source together. These are different functions: an audio interface and a headphone splitter don’t do the same job.

What should you look for in a headphone amplifier?

What to consider What to look for Who this matters to
Comparable listening conditions Use the same playback chain and headphones; if needed, match the perceived loudness of the files. If I want to compare recordings fairly, I don’t want a louder file to influence my judgement. Around 31% of consumers prioritise comparable listening conditions.
Matching your headphones Check the plug and compare power at the right load, output and gain setting. If my headphones need a specific connection or carefully adjustable volume, I want to know whether the output is suitable. Around 25% of consumers prioritise compatibility with their own headphones.
Source, connections and power supply Check the input for your source, the headphone plug and the power supply included with the specific model. If my setup is built around a computer or another existing source, I want suitable connections without unnecessary extra equipment. Around 19% of consumers prioritise their source, desk setup and power supply.
Recording and monitoring Check the number and type of inputs, and whether direct monitoring is available. If I want to make my own recordings, I need recording inputs, not just an output for playing files. Around 13% of consumers prioritise recording and monitoring.
Listening together Check the number of outputs, the plugs and the specified power per output. If several people want to listen to the same stereo source, I want everyone to be able to adjust their own listening volume. Around 12% of consumers prioritise listening with multiple pairs of headphones at the same time.

Common buying mistakes

  • Mistaking a louder file for a better amplifier or recording

    A comparison can give a different result if the listening volume changes between files.

    Use the same playback chain and match perceived loudness before judging the differences. The Audacity manual describes loudness normalisation as a way to make sources sound equally loud.

  • Choosing the highest power rating without checking the output and load

    The FiiO K11’s stated power ratings vary by output and load, so these figures aren’t directly comparable in every case.

    Compare the specifications for the output and headphone load you’ll actually be using.

  • Choosing an interface or splitter for a task you don’t need

    Recording inputs and multiple headphone outputs serve different purposes from using one pair of headphones to listen to existing files.

    Decide in advance whether you want to record or listen at the same time as other people. Choose an interface for recording features, or a splitter if several people want to hear the same stereo source.

Brands and models to consider

FiiO

FiiO describes the K11 as a desktop DAC/amplifier for digital sources, with USB, optical and coaxial inputs.

  • FiiO specifies gain settings and 6.35 mm and 4.4 mm headphone outputs.
  • The K11 needs a separate 12 V/2 A power supply and isn’t a recording interface. Its power ratings vary by output and load, so compare the figures with your headphones in mind.

iFi audio

According to its manual, the ZEN DAC 3 combines USB-C audio with headphone and line outputs.

  • The manual lists switchable gain, 6.35 mm and 4.4 mm headphone outputs, and USB power.
  • XBass+ changes the sound profile. Leave it switched off if you want to keep the playback chain as consistent as possible when comparing recordings.

Focusrite

The Scarlett 2i2 4th Gen is an audio interface for anyone who wants to record sources or monitor them directly as well as play them back.

  • Focusrite specifies recording inputs, a headphone control and direct monitoring.
  • Focusrite specifies an output impedance of 50 Ω for the headphone output. Check how it pairs with your particular headphones; it isn’t a universal replacement for a DAC/amplifier.

Behringer

Behringer describes the HA400 as an analogue splitter for one stereo source and up to four pairs of headphones.

  • Each output has its own volume control. Behringer lists around 40 mW per output at 100 Ω.
  • The stated function doesn’t add a USB audio input or recording capability. Compare the specified power with that of the headphones you’ll connect.

JDS Labs

JDS Labs positions the Atom Amp 2 as a dedicated analogue headphone amplifier for use with a suitable analogue source.

  • JDS Labs lists RCA and 3.5 mm inputs, as well as 6.35 mm and 4.4 mm headphone connections.
  • The version described has a power supply for 110–120 V. Check that the power supply and connections on the specific model suit your setup.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need to alter the files to compare them fairly?

For a listening comparison, match the perceived loudness and use the same headphones and playback chain. The Audacity manual describes loudness normalisation for sources that need to sound equally loud. Keep the originals unchanged if their original levels are what you’re comparing.

Can I connect headphones directly to a line output?

Check which connection on the specific device is labelled as the headphone output. The FiiO K11 lists its headphone output and line outputs separately. Check the headphone power against the output you’ve chosen and its corresponding load.

How can I stop the volume from suddenly becoming too loud?

Start at a low volume and increase it gradually, especially after connecting your headphones or changing the gain setting. iFi specifically warns about switching PowerMatch on the ZEN DAC 3. The World Health Organization highlights that both sound level and listening duration contribute to the risk to your hearing; this general information doesn’t guarantee a safe level for any individual.

What should I check when buying online in the Netherlands?

Check which power supply and cables are included with the version being offered. According to the Dutch government, when buying from a business remotely, you generally have a 14-day cooling-off period, subject to legal exceptions. ACM ConsuWijzer explains that your statutory guarantee depends on what you can reasonably expect from the product and on normal use. Contact the seller if there’s a problem.

Does a headphone amplifier sold in the Netherlands need CE marking?

That depends on the EU rules that apply to the specific model. The European Union’s Your Europe website states that CE marking is required when applicable EU rules prescribe it for the product, so check the rules and requirements for the model in question. CE marking isn’t a sound-quality test.